Vinyl Siding

By
©1993-2012 Tim Carter

        
Summary: Vinyl siding is a fascinating building material. Vinyl siding colors are available in a wide range of colors to match your decor. Vinyl siding installation may not be as easy as it appears.

Vinyl siding is a fascinating building material. I was fortunate enough to be working full time in the construction industry when this product made its debut and blossomed into a major building-product category. As happens with many other building products, vinyl siding pushed and bullied aluminum siding out of the spotlight. I clearly remember my childhood home getting aluminum siding on it. The cost, in 1958, was $400 for labor and material. My Mom and Dad fretted about that decision for hours at the kitchen table.

If you've seen how fast vinyl siding can be installed, you may be easily tempted to read a vinyl-siding how-to booklet or guide. If you've been hypnotized by a home-improvement television show that tempts you into thinking you can tackle installing vinyl siding yourself, wake up. It's not as easy as it appears. It takes considerable skill to get professional results. What's more, you need help in most cases as well as an assortment of ladders and hand tools.

Vinyl-siding colors usually are muted, lighter tones. There's a reason for that. Deep colors absorb and retain the sun's heat. Vinyl siding reacts violently to heat, and expands significantly. If you don't install vinyl siding correctly, it can buckle, warp and distort from the sun's rays. Deep colors would simply make the situation worse. Some paints can be applied to this siding to create different vinyl-siding colors, but beware painting vinyl siding a dark color.

When you obtain a vinyl-siding cost estimate, don't panic. Rest assured that there is a significant cost for the material, especially for all of the trim pieces that are necessary when the siding abuts windows and doors as well as inside and outside corners. Vinyl siding is a product made primarily from crude oil. If the price of oil is high, vinyl-siding material costs will also go up accordingly.

Then there is the labor involved. Don't underestimate the amount of time and effort required for a typical vinyl-siding installation. There is a considerable amount of time spent in setup, trimming, dealing with utility penetrations in walls and even fighting insects. Dealing with wasp and bee nests is common, especially in warmer months. If you watch siding installers, you'll quickly discover that they spend little time installing the siding. The trim work, caulking and fitting take up a majority of time on the average job.

Because people really like the look of real wood, the vinyl-siding manufacturers discovered long ago that if they took the time to mimic wood, it would make the plastic product more appealing. This is why you see cedar vinyl siding. The patterns of horizontal cedar as well as cedar shingles have been copied for years, and are quite popular products.

Vinyl house siding is appealing to many homeowners. Many of my past clients wanted it installed because of its no-maintenance characteristics. If you live in an urban environment, all you have to do is periodically wash it just like your car to make it look like new. The color in vinyl siding is the same throughout each piece, so even if it gets scratched, you can't tell from a distance. It's fairly immune to denting in warm weather, but hail and other objects can shatter it if the conditions are favorable.

When you start to decide on a vinyl-siding color, take your time. If your house has wood siding on it now, the best way to select a color is to get small cans of paint mixed that match the vinyl siding and it's trim. Remember, you can do a two-tone mixture for your vinyl siding by using complimentary colors for the siding and various trim pieces.

Go ahead and apply the paints you like to smaller areas of your existing house siding, allow it to dry and then step back 50 feet to look at the colors. Look at the colors at different times of day to get the full range of color. Using this inexpensive method, you can make sure you get the perfect color. Who cares that your house looks funny for a few days? After all, the new siding will cover the paint.

If you're thinking of applying home vinyl siding to an existing house, you may want to consider taking existing siding off. Adding vinyl siding on top of wood siding can create issues at doors and windows where they tend to get slightly buried. Taking off the existing siding also allows you to add thicker foam insulation. There are distinct benefits to removing existing siding.



Still Need Help? Type Your Keywords Here:
(examples: drywall repair, pilot light goes out, poor lot drainage, crown molding guide, etc.)

Comment on Facebook

Your Facebook friends would love to know how this column helped you solve your problem. Type a quick comment of what you discovered here at AsktheBuilder.com. Thanks!





Comments:

Welcome! I, Tim Carter, don't answer questions here. If you post a question here in the Comments Area, perhaps another visitor will help you. You need to go to the Ask Tim page if you want a question answered. Once there, look closely at how many weeks behind we are. Please be patient as you use this free service. If you have an emergency and need to talk to me, there is an option there for you.
Tommy C
09 Feb 2009, 21:54
Removing existing siding yourself (not that hard if you are handy) can save 15% on installation cost, PLUS the money you get when you take it to the junk yard.
BOB YOUNG
28 Mar 2009, 23:32
What is the cost of vinyl siding a 2 1/2 car garage including the soffit an trim work,labor that is ?I know the cost of my materials but looking for someone to do it.Thanks
cloudy
20 Apr 2009, 13:34
it is worth watching a a documentary film called Blue Vinyl all about this particular product and the effects its production has on our lives..
F collett
01 May 2009, 19:53
I am getting estimates on a vinyl siding job for my entire house. I have to choose between Alcoa Mastic, and Certainteed Momogram 46L. Is one product superior to the other? The cost is the same.
Slade
10 Jun 2009, 15:50
I have already existing siding on my patio. I want to install an outside ceiling but i am unable to slide the siding in order to unscrew the already existing plastic light box, so that I can install the suggested metal box. Any suggestions on how to move the siding.
Slade
Slade
10 Jun 2009, 17:38
I meant to state in the previous question that I am installing a ceiling fan and the siding is the actuall ceiling. The siding is blocked between the house and a lip of the patio ceiling.
pearl eckman
24 Jun 2009, 11:50
Which is preferable...virgin vinyl or recycled vinyl vertical siding? We're doing board & batten over T111.
Kevin Scott
14 Oct 2009, 11:31
I am wondering how to add another layer or two to the bottom or the vinyl siding. The reason for this is I live in Northwestern Ontario Canada and the starter stripe is located right where the floor sheeting meets the floor joists. There is a cool breeze that is coming inside when the tempature is cooler outside.

I've asked local professionals and they say I have to replace the entire siding and start over
Brigitte Huber
05 Dec 2009, 12:42
We sided our entire house 2 years ago with Gentek Vinyl Siding - and we sided it below the foundation brick (so the siding is level with the ground). We would now like to place windows in our basement which would require us to go through the foundation brick and therefore through the siding covering it on the outside. I was told by 2 renovators that the only way to do this was by removing the siding from the top of the house all the way down then remove the brick to accommodate the window and lental and then reside the house. The reason being each piece of siding is nailed to the wall and then the next piece of siding hooks into the previous piece (overlaping) from the ground up. I contacted Gentek (the manufacturer and explained the issue. They said this was rediculous and I should get a new installer because the beauty of vinyl siding was the ease and flexability of working with the product. They never gave me any clues as to how this is to be done and I can not find anyone who knows how to do this. Do you know how to do this?

Thank You
Brigitte Huber
Jeff
11 Dec 2009, 14:03
Brigette

As you explain your issue, I agree with Gentek.

Get more opinions. From my perspective, you can easily cut the siding where the window opening will be and later hide the cut edges with j-channel which is typically used to encircle windows and doors. Yes, this may create a hassle for cutting and replacing masonry work but not impossible. If this part of the house were say under 300 sq ft, removing all the siding may be an option, but any larger the contractor is just looking to make his job easy and more profitable.

Keep looking

Jeff

     View all comments
*Name:
Email:
Notify me about new comments on this page
Hide my email
*Text:
Security Image:

Visual CAPTCHA


 
Remember, Tim Carter doesn't answer questions here in the comments. You need to go to the Ask Tim page.
 
Have a Suggestion?
Do it right, not over!

Ask the Builder Comment Help

Thanks for stopping by! The Comments Section of my AsktheBuilder.com website is a place for you to share stories about how you've solved a similar problem at your home or carry on a conversation with other visitors. I tried, at the beginning, to be part of the conversation, but there were too many questions being asked and it was impossible for me to keep up and get my regular work finished each day.

If you want to ask me a direct question, you should go to the Ask Tim page of this website.

Helpful Comment Tips: If you need help with a problem, please try these things now before you type in a comment. You could discover your answer in just minutes.
Don't show this alert again.