Laminate Flooring Install Quick Start Guide
DEGREE OF DIFFICULTY:
I’ve installed countless floors in my career. Some took weeks to complete they were so hard and complex.
Imagine, however, having a bare subfloor and just HOURS later (yes, hours!) you could be moving in the furniture. It’s possible with laminate flooring.
This project is PERFECT for a beginner, that’s why I rate it at two out of five hammers.
I remember when laminate flooring was introduced in the late 1990’s. It was not bad, but it’s now a real player. There have been significant technology improvements in the clear coating and the replication of the actual wood or stone flooring that’s being imitated.
Watch the video below unless you’ve come here from YouTube having already watched my video.
Be sure to look at the RELATED CONTENT links at the bottom of this page. Lots of goodies there for you.
REQUIRED TOOLS & MATERIALS:
|Armstrong Laminate Flooring||Wide Pry Bar|
|Circular Saw||Framing Square|
|10-Inch Double-Bevel Miter Saw||Topographic Map Bandanas|
|Tape Measure||Safety Glasses|
|Tim's Favorite Tools|
- Crazy as this sounds, STOP and read the written instructions that came with your flooring. Just Do It.
- SECRET TIP - If you want your laminate floor to turn out nearly perfect, the subfloor MUST be flat. This doesn’t mean LEVEL. It means there can’t be humps, dips, low or high spots in the floor.
- Fix the humps and bumps in your subfloor. Fill with thinset used to set ceramic tile. Asphalt shingles with the granules turned DOWN can be used too. Glue them down with caulk so they don’t move.
- Check the wall you’re starting against to make sure it’s STRAIGHT. Most walls are NOT straight. Use a taught string line to check it. If you have a dip in the wall that’s greater than the combined thickness of your baseboard and toe stripping, you’ll have to scribe the first row. UGH!
- Maintain the 1/4-inch gap between the flooring and the walls. Laminate floors move baby!
- Use strips of 1/4-inch material, not little loser pieces. Always place a long strip at each butt joint of flooring. This helps keep flooring STRAIGHT.
- If using a circular saw to make cuts, cut with finished face pointing DOWN to prevent chipping. When possible, use a power miter box saw.
- Inspect each piece of flooring before installing. Look for defects on the finish and make sure the tongues and grooves are NOT damaged.
- Maintain the 1/4-inch spacing when you cut around outside corners and doorways.
- The rest is easy! Send me photos of your installed floor. Leave comments on my YouTube videos if they helped you!
- Celebrate your Victory!
Please subscribe to my Newsletter and get insider information on the latest home-improvement tips, and products. I guarantee you that my newsletter WILL save you time and money. Frequently, I include your questions with my answers and proposed solutions. Perhaps the best part of the newsletters are my reviews of new products based on my own testing. Click here to read my past newsletters.
It is FREE & EASY.
RELATED HELPFUL CONTENT:
- How to Install Laminate Flooring Video 1 of 3
- How to Install Laminate Flooring Video 2 of 3
- How to Install Laminate Flooring Video 3 of 3
- Laminate Flooring Installation & Care
- How to Install a Laminate Floor
- Contractor Hiring Guides (use promo code EB20 for 20% off)