New House Specifications
New House Specifications
Blueprint Specifications You Need for Your New Home
Instant Download PDF document!
100% Money Back GUARANTEE - NO Hassle!
A special link inside the PDF allows you to get a copy of the specifications in a Word DOC file.
You can easily copy & paste and update your house plans.
Well Mr. Booker, as much as I love to work with my hands and smell that fresh sawdust, there are only so many hours in the day. The truth be told, I can't be there to work on your home. But I can whisper in your ear or that of your builder as to how I would do hundreds of things if I was pouring your footers, installing your plumbing system, wiring your home, etc. What you really need is my system, not my sweat.
My specifications and ideas no doubt helped Bob Cowan build his house in Granite Bay, CA. Read what he wrote back to me:
This cool Instant Download product contains over three hundred descriptive specifications - excerpts below -that enhance the structure and value of your new home. Just after Jennifer Rhodes opened up my New House Specifications she wrote back to me:
Read additional comments on our products and dealing with the AsktheBuilder store on our Customer Reviews page.
The Instant Download document has multiple specifications in each of these Exterior categories:
The cost for this invaluable tool is just $47.00.
Do you need more convincing? Here are some specifications from the just the Exterior Concrete Slab section:
".....All poured concrete sidewalks and patios shall contain concrete that has a design strength of no less than 4,500 psi. No water can be used on site to make the concrete more plastic nor can water be used as a finishing aid.
All slabs shall be a minimum thickness of 4 inches. A 5-inch thick slab is preferred.
All exterior concrete shall contain 1/2-inch diameter steel reinforcing rods and these shall be placed at 2 foot centers in both directions. This steel should be in the lower third of the slab with a minimum of 1 and 1/2 inches of concrete between the steel and the compacted sub-grade. 42# mesh will also suffice for steel reinforcing.
Immediately after the final finish is complete, apply a clear-drying liquid curing compound to the fresh concrete.Control joints shall be cut in all slabs to prevent random shrinkage cracks. These joints shall be a minimum depth of 1/4 the thickness of the slab. They can be saw-cut as soon as the concrete can withstand foot pressure and the action of the saw without harming the finished surface. Under no circumstances shall the joints be cut later than 24 hours after the concrete is hard enough to walk on without harming the finish. ..."
Or how about these specifications from the Interior Plumbing section:
".....Rough in basement bathrooms and utility sinks whenever possible to save money. Cutting into concrete slabs to create basement bathrooms at a later date is a very expensive proposition.
Water supply lines shall be sized to minimize water pressure and volume losses. Use 3/4 inch minimum pipe size to feed all fixture groups. Branch off this 3/4 inch pipe to each fixture with its own 1/2 inch pipe. Never serve two fixtures with a 1/2 inch pipe.
All shut off valves under all fixtures shall be ball valves.
To minimize noise in water supply pipes, consider using type L copper if copper is being used as your water supply pipe. Type L is thicker and absorbs turbulence much better than thinner type M copper. Larger diameter pipe sizes help to minimize water noise as the water flows slower through these pipes to satisfy a given fixture demand.
The primary water supply line serving the entire house shall be 1-inch diameter until it passes and serves the water heater and feeds the first major fixture grouping.
Large hot tubs or large capacity whirlpool tubs must be served with minimum 3/4 inch supply piping. These fixtures almost always require separate water heaters to produce the vast amounts of hot water required to fill these vessels.
Water hammer is eliminated by using the larger supply piping as mentioned earlier.
If copper tubing is used for water supply, all joints must be wiped clean of excess soldering flux. Wipe pipes with a rag soaked in mineral spirits until each joint is perfectly clean. Acid flux that is not cleaned from copper pipe can cause future corrosion that causes leaks.
Investigate if your area suffers from aggressive water. If so, be sure you use the correct water supply piping that will not suffer corrosion from the aggressive water.
If you plan to have a water softener installed, pipe outdoor hose bibs so they do not pull water from the water softener. However, one soft water hose bib should be installed in or near the garage. If you wash your car and rinse with soft water, water spotting does not happen...."
This eBook is an instant download the moment your credit is approved. It comes to you in PDF format.
Questions? Skeptical? Send me a comment or question: Submit a Question
You have nothing to lose and everything to gain. If you don't feel the eBook is worthwhile, just email me and I will issue a credit.
Purchase my products online at my AsktheBuilder Store. Online ordering is secure. All transactions are protected using GoDaddy.com.