Here's my own composite deck. There's lots of railing. It didn't take long to understand how to install the entire deck and rail system achieving professional results. Copyright 2021Tim Carter
Please take this short one-question survey and magic will happen soon!
Watch this short video and then just below it go on the record stating whether you think it's true, false, or some mendaciousness has filled the cracks of time.
"...Best start putting first things first. 'Cause when the hourglass runs out of sand, you can't flip it over and start again. Take every breath God gives you for what it's worth."
This song was featured in the February 21, 2021 AsktheBuilder Newsletter.
Minutes ago, I shared that I was going to be on LIVE TV today in Chicago at 12:15 PM Eastern Time.
You may have been one who responded, "That's great, Tim. But I want to see you on MY LOCAL NEWS not WGN in Chicago. How can that happen?"
It's so easy! All you have to do is go to your LOCAL TV news station's website and use the CONTACT US form or NEWS TIP form and let them know about me. You know my email address as it's in the FROM field in this email to you.
Just let the station know why you feel you, and others in your city, would benefit from me sharing both winter-weather tips as well as ANY home improvement information. Who knows, I may become a regular on your news station!
You may not realize this but I was the LIVE TV home improvement expert for the ABC and NBC-TV affiliates in Cincinnati, OH for about six years.
Live TV is a hoot to do. You really don't know what's going to happen and you need to be on top of your game to say the least!
Let me know what your local TV station says if you reach out to them.
Tim Carter
Do It Right, Not Over!
Today - Tuesday - February 16, 2021 - I'm going to be on LIVE TV on WGN-TV in Chicago.
I'll be on approximately at 12:15 PM Eastern Time.
Below is the WGN LIVE segment.
You can watch the LIVE stream on your computer, tablet, or phone. CLICK or TAP HERE to be able to watch the LIVE feed.
The news anchors are going to be asking me about the FRIGID weather and how to best cope with it. You may be suffering at your home now so you don't want to miss this segment.
I plan to have some tips that you rarely hear. You already know what to do to prevent pipes from freezing, so let's hope the anchors stay away from that worn-out question!
You want to know WHY your house is so darned cold and what you can do RIGHT NOW to stay warm, right?
The segment is only 5 minutes so tune in around 12:10 PM and just hang out until they patch me in using ZOOM technology.
I hope to see you in a little over three hours from now.
Want to see Tim on your local TV Stations? Check out his advise in this newsletter.
Tim Carter
Do It Right, Not Over!
Greetings and salutations! This might be your first newsletter! Getting something new is always exciting, isn’t it? This top part of my newsletter is reserved seating for you and every other subscriber who's signed up in the past seven days. By the way, this is an unusual whimsical issue, so give me a week or two before passing judgment.
You, though, might be a valued crusty subscriber who is flummoxed as to why I go out of my way to greet new subscribers. You could be so creaky that you clearly remember when I shared the video about how to drill a hole in 1/4-inch steel plate! Drilling wood is for sissies, right?
My youngest daughter’s hobby is pottery. She’s self-taught and is really starting to gain confidence. You may remember when we tried to build a wood-fired kiln last spring. It didn't work and I discovered later the firebox was simply too small. I couldn't get enough fire burning to raise the temperature much above 1,200 F. CLICK or TAP HERE to watch a short video of the kiln really cooking. Yes, the flue liner is cracked and I wired it together to prevent it from collapsing.
After the wood-kiln #Experiment, she bought herself a fancy electric kiln. It gets hotter than Hades! 2,100+ F!! Here’s a photo of it about two hours into a 24-hour firing. The temperature rises slowly to minimize stressing the clay pieces. It's all computer controlled and fires pottery quite well.
Do you create your own glazes?
If so, my daughter would LOVE to know the best online sources where you purchase the ingredients to make your own custom glazes. TNX in advance for this help. You can just reply to this newsletter and give me the URL you buy from.
My goal is to occasionally share some of her work with you, Yep, I’m a proud Papa.
About two weeks ago, Nancy was having a low water-pressure issue in her home. I suggested she read these columns:
Solving Low Water Pressure Problems
Nancy did and then she got back with me. She decided that she could save a ton of money having me call her rather than hiring a plumber. She was right.
Are you sitting down?
While she and I were ON THE PHONE, she used a wrench and SOLVED THE PROBLEM RIGHT THEN AND THERE.
It was so much fun for me to hear the happiness in her voice when the water pressure jumped!
Oh, I forgot an important part of the story! Nancy is 90 years YOUNG! Talk about valued and crusty!
I don’t want to hear excuses about why you can’t fix something yourself. If Nancy can do it, so can you for goodness sake.
Don’t forget, I can COACH YOU ON THE PHONE!
You may be one who asked how in the world last week’s fun Ask the Builder Clue Mystery game came to be and where in the world I found the woman who did the sultry voice recording on the last page? It all starts with Johnson Hardware and the great folks at Walt Denny, Inc.
Johnson Hardware is the biggest sponsor of this newsletter. One of my jobs is to make sure you see stunning photos demonstrating how you can benefit from using their marvelous door hardware.
I got a huge assist from two wonderful and talented women. Karen-Eileen Gordon, Mary Gene, and I teamed up to create a new mystery game where you see these stunning Johnson Hardware photos.
It was my idea to create a virtual game of Clue. I came up with a list of 30 possible words that could be used in a mystery story.
I shared the list with Mary Gene, she’s the editor of this newsletter, and said, “I know you enjoy creative challenges. Please take fifteen of these random words and see if you can create a fun and interesting mystery story.”
Three hours later, it was done. I modified Mary Gene’s story just a bit and I knew I needed the voice of a professional actress to help you solve the mystery.
I called my very good friend and Hollywood actor David Lawrence. He immediately suggested Karen.
I hired her to read the script I’d written, allowing you to SOLVE the mystery and decode a fun message. Karen is a professional Hollywood actress. There’s a very good chance you’ve seen her work.
I want to thank Karen and Mary Gene for all they did to make this fun diversion possible.
What? Wait a minute! You might not have solved the fun mystery yet!
I believe you’ll want to do it after reading what Wayne sent me:
“Dear Tim:
My wife and I just finished doing your mystery puzzle. It was a fun and interesting diversion for a Sunday morning. The story-line was great and it was fun to decrypt the coded message. We laughed when we read it! The clip of Ralphie decoding his secret message was the icing on the cake.
I am glad that I signed up for your newsletter and just like Ralphie waiting for his secret decoder badge to arrive, I look forward to receiving the Ask The Builder newsletter each week. Usually, I hate reading advertisements, but you always present your tips in a manner that is interesting and entices me to read about products I would otherwise not have known about. Keep those newsletters coming.
Sincerely,"
Wayne Reetz
Remember three weeks ago when I shared with you a small country you might have never heard about before?
I’m blessed to know quite a few friends, all virtual, who live in other countries. I’ve come to know Phil and Patricia in Australia, Johan in Belgium, Jonathan in the UK, and lots more.
Jonathan sent me a photo of the tiny island! CLICK or TAP HERE to see that photo as well as a few from his own yard. Wait until you read the story about his chestnut tree!
Do you enjoy dark chocolate? I confess it’s one of my sins of pleasure. I try to lead a pure and simple life, but dark chocolate can cause me to go off the rails.
Would you look at a few labels of Japanese chocolate and tell me which ones you find to be the most attractive? CLICK or TAP HERE to see these distinctive candy wrappers! Can you guess which one I can’t wait to taste?
Thanks for your help.
That’s quite enough for a Sunday.
Next week I’ll have a boatload of home improvement stuff for you including a review of two new Bosch heated jackets, one’s a hoodie. You’ll see INFRARED PHOTOS of the heating elements hidden inside the jackets!!
Until then, stay warm.
Oh, one more thing. Happy Valentine’s Day!
Be sure to give your sweetheart a twirl in a romantic kitchen dance and maybe go out for dinner. I’d order halibut and a Japanese sweet potato in case you’re wondering. If they had a wedge salad, I’d get that too.
Tim Carter
Founder - www.AsktheBuilder.com
Certified Organic Clean - www.StainSolver.com
Chief of Comms NEFR - www.W3ATB.com
Do It Right, Not Over!
P.S. Winter is when potholes bloom in the USA. Do you know the BEST WAY to patch a pothole? Click to see if you’re right.
Jonathan is one of my friends from the UK. I would so love to go there and visit and have a meet up with him and all other nearby Ask the Builder newsletter subscribers.
Here are a few photos he sent me and some context of where he lives:
"I'm in the countryside near the seaside resort town of Blackpool in the North West, about an hour from Manchester, Liverpool and to the north, the Lake District. Most Americans that visit the UK love it."
When I published a photo of the flag of the Isle of Man, Jonathan emailed me the following:
"I don't need to look where the Isle of Man is...... I'm a 15-minute drive from the coast at Blackpool from where, on a clear day, it can be seen. Here's a picture taken with a telephoto lens by a chap I know, Stephen Cheatley who's a professional photographer. I've been there a few times with my parents when I was growing up and once as an adult about 25 years ago. I remember that visit well, it rained just about all day every day."
This is just the view of Snae Fell, not the entire Isle of Man. The photo was shot by professional photographer Stephen Cheatley and republished with his permission. You absolutely should see some of his nighttime photos. WOW!
And Jonathan is really proud of a tree he planted. It's a fantastic specimen. Here's what he had to say:
"Randomly, here's a couple of pics of my Horse Chestnut (Conker) tree I planted when I was about 10, I'm now 62."
Select the bars you'd be likely to buy just by looking at the LABEL. You can pick one or all of them, but just the ones that really appeal to you.
Are you looking for accurate cost information for a gas furnace?
If so, you're in the right spot. In this guide, you'll learn:
Whether you're a first-time owner or a homeowner trying to cut down on the heating costs associated with your gas furnace, this guide is for you. Keep reading to learn more about your gas furnace, how much it costs to operate, and how you can reduce those costs while still keeping your home warm and cozy.
If you're a homeowner with a gas furnace, chances are you usually just turn it on and forget about it. But, do you know how it actually works?
A furnace heats the air around it and then distributes that air throughout your home.
The furnace kicks on when the thermostat in your home recognizes that heat is needed. At that point, the gas inside the furnace (which is typically propane or natural gas) ignites in the area known as the burner.
The flame that’s produced then heats up the heat exchanger, which is made of metal. Next, the heat exchanger moves the hot air throughout your cold home.
As the exhaust is shunted out of the flue, the hot air (by a mechanism called the blower) fills the ducts inside your house, keeping you nice and warm, while pushing any remaining cold air back into — you guessed it, the furnace. That cold air gets heated up inside the furnace, and the process begins again.
Because your gas furnace consumes air, it's a smart — and safe — idea to add a fresh air supply vent to your home. Buy this product today and install your very own fresh air supply vent to keep your old or new furnace operating at its best.
Check out this video below for more information:
The upfront costs of gas furnaces vary widely, especially now that energy-efficient gas furnaces are becoming the norm. In general, depending on the model you want to install, you can expect to pay anywhere between $2,000 and $7,000 for a gas furnace. On average, many homeowners pay around $3,000 for a natural gas furnace.
However, there are additional costs to watch out for. If your ductwork needs to be repaired, there’s a problem with your gas line, or other installations are needed, you may be looking at anywhere from $1,000 to $6,000 in labor costs (i.e. for hiring a HVAC contractor).
Although the expense seems high, don't despair. Gas furnaces are much less expensive than oil furnaces. They also typically come with a good warranty, and their high energy efficiency ratings make them ideal for use over a long period.
It can be difficult to determine when to repair or replace your gas furnace. However, there are some helpful measures to guide you in making an informed decision.
First, if your gas furnace is more than 15 years old, it's probably worth replacing. Additionally, if you're noticing excessive dust in your home, humidity issues, rattling noises caused by faulty ductwork, or cold rooms, it's likely that your gas furnace needs to be replaced.
Still not sure if it's better to repair or replace? Try this trick: use the Energy Star Home Energy Yardstick to determine your home’s energy efficiency rating. Is your score less than five? You may be able to cut down on your furnace costs and improve your HVAC system by installing a new gas furnace.
Ideally, the size of your gas furnace should be determined by its ability to heat your entire home. The heating capacity of a gas furnace is expressed as British thermal units per hour (Btu/h); residences are required to have furnaces with heating capacities of less than 225,000 Btu/h.
In general, a good HVAC professional should be able to help you find the right-size furnace for your home.
A furnace that’s too big will heat up spaces too quickly, thus kicking on and off too frequently and increasing your energy costs. Meanwhile, a furnace that’s too small will run continuously, driving up your energy bills and damaging your heating system.
Finally, another consideration is determining what type of furnace to get. A single-stage furnace (which can only be turned on or off) may be perfect for heating a small house. However, larger homes may need a two-stage furnace (which can run in high- and low-power modes). All of these factors can influence the size of the gas furnace that’s optimal for your home.
The annual fuel utilization efficiency (AFUE) rating measures the efficiency of a central furnace. More specifically, an AFUE rating reflects the percentage of fuel that’s converted to heat by a furnace.
For example, a furnace with an AFUE rating of 90% reflects the fact that 90% of the energy inside a gas furnace will be converted to heat, while the remaining 10% will be lost elsewhere in the ductwork.
While oil furnaces must have an AFUE rating of 85% or more, gas furnaces must have higher AFUE ratings of 90% or 95%, depending on the state in which you live.
Some furnaces available now have AFUE ratings of up to 98%. Although these gas furnaces may be more expensive, they can save you thousands of dollars in average heating costs over their lifetimes.
Furnace prices vary widely due to factors such as the size of your house, the current condition of your ductwork, and installation costs. However, it's possible to get a sense of how much different brands of furnaces can cost. Read on to learn more about the average costs of different gas furnaces by brand.
American Standard Furnaces tend to range in price from $1,600 to $6,000, and they are known for their durability. Some of the high-efficiency models qualify for local rebates, which can lead to a lower total cost for consumers, and many of the furnaces boast a higher efficiency rating than required, with AFUE ratings of 97% or more.
Bryant Furnaces offer variable-speed gas furnaces (which use variable-speed blowers to more precisely control airflow). You can choose between single-stage and two-stage furnaces to help control your home's energy costs. In general, the average cost of a Bryant furnace is roughly $2,300, although rebates are available on many models.
If you're looking for a high-efficiency furnace, Carrier Furnaces offers deluxe models with up to 98.5% AFUE that range in price from $2,000 to $5,000. Although the upfront costs aren't cheap, the high efficiency rating can help reduce heating costs over time, thus making the brand a potentially cost-effective option.
If you're swapping out an old furnace for a new one, the pricing for a Lennox furnace typically ranges from $1,000 to $2,500. Add the cost of installers and your final price will be closer to $2,500 to $4,000. Since Lennox is closer in price to less expensive brands such as Amana and Goodman, it’s an ideal choice for keeping your replacement costs low.
Rheem Furnaces offer home-heating capabilities with a low square-foot commitment, making them ideal for homes of all sizes. Similar to its competitor Ruud, Rheem Furnaces generally range in price between $1,200 and $2,000, not including labor costs.
Trane Furnaces offer standard gas and electric furnaces as well as varieties of the classic heat pump, which acts like an air conditioner in the summer and a heater in the winter. These gas furnaces range in cost from between $2,000 to $8,000.
Maintaining your gas furnace is a great way to prolong its life and keep your home heated to your liking.
Simple maintenance tests, such as checking the heat exchanger, cleaning the blower, removing soot that has built up in the furnace, and testing for carbon monoxide (which can potentially be lethal) are crucial for keeping your furnace working smoothly for years to come.
As much as you may want to, you can't do it all on your own. Occasionally, you should bring in a professional technician to assess the combustion efficiency of your furnace and ensure that the ductwork in your home is in good condition.
Keep an eye on your furnace all year round and note anything that may be cause for concern. If your gas furnace is showing changes in its condition or becoming louder over time, it may be a problem that you need to identify with the help of a technician.
Finally, if your house is still cold with the heat on and you've been keeping up with maintenance requirements, you may have a furnace that's not properly sized for your home.
Consider replacing your furnace or bringing in a HVAC contractor to help optimize your HVAC system. It's crucial to know when to repair or replace your furnace before it starts to drive up your heating bills.
It's easy to save money on your gas furnace with some effort. First, to cut down on upfront costs, check for rebates. You can likely save up to hundreds of dollars on your gas furnace that you can use to help cover labor costs during the installation.
Second, try to save money during the coldest seasons: fall and winter. Turn your thermostat down while you sleep or are out of the house — this can save you up to 10% a year on your heating bills.
Open your drapes to let in sunlight to warm your home, but seal your windows to prevent warm air from escaping and cold air from entering. Finally, keep your gas furnace in good condition. A well-maintained furnace can help you save money over time and keep your home warm without driving up your energy bills.
No matter who you are, where you live, or what type of house you own, at some point, you will have to address your heating and cooling needs. Unfortunately, many people do not realize that a furnace is a significant and costly investment.
That is why if you are looking for accurate price information or additional details, you have come to the right place. In this guide, you will learn:
Typically, the average cost to install a new furnace will depend on the location of the furnace, the type of furnace you need, and the size of your home. That is why the average cost usually ranges from $2,000 to $8,000, with the national average for a full furnace installation being $6,000.
This full furnace installation includes the furnace cost, the labor fees, ductwork, and other installation costs and upgrades.
Even though gas-powered furnaces are the most popular type of furnace, other available options include electric furnaces and oil furnaces.
Gas furnaces are often the most commonly found furnace unit in homes. With these furnaces, gas is piped into the municipal line, which causes the gas burner and the hot combustion gas to ignite, and as a result, the temperature of the air rises.
Natural gas furnaces often have the lowest yearly costs and are also the least harmful to the environment. However, the home needs a gas line in place to be able to purchase a gas furnace. For these reasons, they may not be an option in more rural areas.
Average Cost: New gas furnaces usually range in price from $650 to $3,000, with installation costs averaging about $6,000.
These oil furnaces are also known as pressure burners, with oil being sprayed into a combustion chamber at a high pressure, which is then ignited by an electric spark. As the oil mist is sprayed, the oil continues to burn, producing heat.
Average Cost: Oil furnaces usually cost between $500 and $2,500, with installation costs averaging about $6,000.
Electric furnaces are the most efficient method of heating because they only use electricity. Even though they are easier to install than a gas furnace, they often result in higher energy bills. Also, with electric furnaces, it is incredibly vital to pick a furnace that best fits the size of your house. Otherwise, the unit will be either running too frequently, or it will always be turning on or off.
Average Cost: Electric furnaces often range in price from $700 to $1,100, with most homeowners paying around $2,400 for installation.
Even though the type of furnace and size will often dictate your new furnace installation costs, there are additional factors that can affect the overall price.
Labor costs will usually range anywhere from $75 to $100 per hour depending on the area you are located in, the company doing the work, and the complexity of the installation job. However, these labor costs can also increase if assistant installers are present or an inspection of the furnace is required.
Duct system installation will often affect furnace installation costs. This is because if you do not have ducts installed, a new duct system will need to be designed for your home.
Additionally, if your existing duct system is outdated, it may require air sealing to eliminate air loss and help your new heating system operate more efficiently.
Generally, a permit is required for all types of furnaces, including electric furnaces, oil furnaces, and gas furnaces. There are two different ways inspections and permits can affect the overall furnace price:
During this inspection, the inspector will review the unit's overall installation and verify that it meets manufacturer and locality requirements. They will also review the electrical connections and conditions and make sure they are up to current codes. Finally, they will check out the plenum and duct connections to your home's existing ductwork and make sure they are efficient.
Even though furnaces can all appear similar when you first start looking for a system, in truth, each unit is very different, especially when it comes to capacity. That is why finding the right furnace size for your house is significant for overall energy efficiency and reducing energy costs.
If you are considering furnace sizes, it is important to get a system that will provide you 40 to 45 BTUs of heat per square footage. That means if your home is 3,000 square feet, you will want a furnace that can provide between 120,000 BTUs and 135,000 BTUs. However, this sizing can also depend on whether you live in a cooler or warmer area.
The average cost of replacing an old furnace is usually around $5,000. However, these costs can range anywhere from $2,000 to $9,000 and include the cost of materials, labor, and equipment. However, furnace replacement pricing usually depends on several factors, including the type of furnace you are replacing, the complexity of the work, and whether you need someone to get rid of your old furnace for you.
It is essential to understand that when you are replacing a furnace, the type of furnace you want may not be the best furnace for your house. That is why it is essential to do your research before you decide on a replacement furnace and find one that works both for your needs and your replacement cost budget.
The average cost to replace a gas furnace usually varies between $2,000 and $9,000. However, the total cost will vary depending on the brand you want, how complicated the installation process is, and the overall efficiency of the replacement unit.
For instance, if you decide to replace your gas furnace with a high-efficiency model, you can be looking at a price that is 50% to 100% higher than a standard model. However, these high-efficiency furnaces are often best for areas that have to endure brutal winters.
Common gas furnace brands include Goodman, American Standard, and Payne.
Oil furnace replacement costs range anywhere from $5,000 to $8,000. Even though these furnaces have been around longer than electric furnaces and gas furnaces, due to the price of oil, they are relatively non-existent. They are typically only used where specific resources such as gas or electricity are not available.
The more common oil furnace brands include Lennox, Armstrong, Rheem, and Ducane.
A replacement electric furnace can run you upwards of $2,000 or more. Even though these furnaces are less popular than gas models, they are typically seen in areas where the winters are milder, in the form of geothermal systems or heat pumps.
While the electric furnace is considered a higher efficiency furnace, they are not as cost-effective as gas models since they use a lot of electricity to heat a home.
Your furnace plays an essential role in your home, especially in the winter. However, because of the steep pricing involved, buying a new furnace or a replacement is considered a substantial investment that requires careful thought and significant research.
Fortunately, there are actions you can take that can help you save money and ensure you are getting the right piece of equipment that works best for you and your home.
Consider the following tips:
Subscribe to the FREE Ask the Builder newsletter to receive professional advice for your home. Complete the form below and each week you'll get:
Unsubscribe at any time. We respect your email privacy.