0:00
Ah, another pesky leak. You know, aluminum gutters are really fantastic and a lot of houses here in
0:13
the tri-state area have them and along the length of the gutter they rarely leak but sometimes at
0:18
the corners or the end caps or the outlet tubes a leak can develop over time. What's the way to
0:23
solve the leak? It's really pretty simple. What you need to solve the problem is you need to get
0:29
the right glue or the right adhesive or the right sealer to do the job. Typically the gutter
0:35
manufacturer makes one that is compatible with that gutter. Look at the end caps of your gutters
0:40
to see if there's a name printed on it. If there is, then go ahead and get the right sealer for the
0:45
job. What you want to do next, clean the inside of the area where the leak is occurring. All you
0:52
really have to do is get rid of any excess water, go ahead and use some soap and water solution
0:57
a small scrub brush, perhaps a scouring pad, scrub it lightly, get it squeaky clean
1:03
rinse it, dry it, and you're ready to go. Be sure to follow the directions on the tube of sealer
1:10
Usually all they want you to do is apply it to a clean, dry surface. Make sure you also apply
1:15
a liberal amount of the sealer because as it dries, the sealer shrinks. Oh yeah, check this out
1:22
The gutter seal material, it's really simple to work with. Just squeeze it out, it's a lot like toothpaste, spread it with a little stick or a twig
1:31
you're going to get great results. Make sure it sticks really well to the inside of the gutter
1:35
and all your leaks will stop for sure. If you want to discover more home improvement tips
1:41
go to askthebuilder.com
