Tim Carter shows off the first wood floor support beam in place on top of the four 6 x 6 posts. All the post notches are in contact with the bottom of the beam providing a continuous load path down to the poured concrete piers. For more DIY Shed building tips and information and to […]
How to Make a Wood Floor Beam Tim Carter shows step one of how to create a beam for a wood floor system. He talks about how to create a splice. Part two of the process is in the next video in this playlist. For more DIY Shed building tips and information and to purchase […]
Tim Carter shows off a few of the finished wood posts all notched and ready for the beams. For more DIY Shed building tips and information and to purchase the actual plans for the shed in this video, click the following links: SHED PLANNING: https://www.askthebuilder.com/how-to-plan-a-shed SHEDS for STORAGE: https://www.askthebuilder.com/storage-sheds GARDEN SHEDS: https://www.askthebuilder.com/garden-sheds SHED RAMPS: https://www.askthebuilder.com/shed-ramps/ […]
Tim Carter shows a finished notched wood 6 x 6 post on top of a poured concrete pier. He also demonstrates how a hold down anchor connects to the pier and the wood post with very special hardware. For more DIY Shed building tips and information and to purchase the actual plans for the shed […]
Tim Carter shows how to properly notch a 6 x 6 wood post to accept a double 2 x 12 beam. This is the BEST way to provide support to a beam as it provides a continuous load path to the concrete pier below. For more DIY Shed building tips and information and the actual […]
Tim Carter demonstrates how easy it is to calculate how high each wood support post should be using an optical builders level and simple grade school math. For more DIY Shed building tips and information and to purchase the actual plans for the shed in this video, click the following links: SHED PLANNING: https://www.askthebuilder.com/how-to-plan-a-shed SHEDS […]
Tim Carter demonstrates how to use an optical builder's level. It's important to set up the tripod so it won't tip over on a slope. It's very important to make sure the bubble in the level vial is perfectly centered when you rotate the optical level in a 360-degree circle. For more DIY Shed building […]
Tim Carter talks about the correct tool to use - an optical builders level / transit - to get the wood 6 x 6 posts perfectly level. It's very hard to get the concrete piers level when you're looking for a maximum margin of error of no more than 1/8 inch. It's easy to get […]
Tim Carter shows how to install a concrete pier anchor bolt. It's important to get it in the right place because you often only have 1/4 inch margin of error. For more DIY Shed building tips and information and the actual plans for the shed in this video, click the following links: SHED PLANNING: https://www.askthebuilder.com/how-to-plan-a-shed […]
Tim Carter shows how to use the handmade concrete chute to put concrete into the DIY shed pier form. For more DIY Shed building tips and information and the actual plans for the shed in this video, click the following links: SHED PLANNING: https://www.askthebuilder.com/how-to-plan-a-shed SHEDS for STORAGE: https://www.askthebuilder.com/storage-sheds GARDEN SHEDS: https://www.askthebuilder.com/garden-sheds SHED RAMPS: https://www.askthebuilder.com/shed-ramps/ ACTUAL […]
Subscribe to the FREE Ask the Builder newsletter to receive professional advice for your home. Complete the form below and each week you'll get:
Unsubscribe at any time. We respect your email privacy.
