Tim Carter shows why a notched post is better than bolting a beam to a post. For more DIY Shed building tips and information and to purchase the actual plans for the shed in this video, click the following links: SHED PLANNING: https://www.askthebuilder.com/how-to-plan-a-shed SHEDS for STORAGE: https://www.askthebuilder.com/storage-sheds GARDEN SHEDS: https://www.askthebuilder.com/garden-sheds SHED RAMPS: https://www.askthebuilder.com/shed-ramps/ ACTUAL SHED […]

Tim Carter explains the parts of a typical hold down anchor and how to connect a wood post to a concrete pier using one. The hold down anchor prevents uplift. Strong winds can lift a wood shed from a foundation causing it to tumble across a yard or field. For more DIY Shed building tips […]

Tim Carter demonstrates how to install through bolts while assembling a wood floor system on wood 6 x 6 posts for a DIY shed. Through bolts make for a better connection than lag bolts. Lag bolts are unacceptable because if the installer over tightens them, the wood fibers get shredded by the coarse threads and […]

 How to Build a Wood Frame Floor Part 1 Tim Carter demonstrates in this DIY Shed series how to build a wood frame floor using treated lumber and 6 x 6 wood posts. Earlier in this video series and playlist, Carter showed how to build and notch the wood posts. For more DIY Shed […]

Tim Carter demonstrates how to use the straight edge of a framing square to check to see if a wide piece of lumber is cupped. Cupped lumber is when there's a hollow spot on one side and a hump on the other side. You don't want a cupped piece of lumber as the outer band […]

Tim Carter shows how to look down a wide piece of lumber to check for crown. Crown is the hump you'll often see in a piece of lumber. You always want the crown to be pointing up to the sky. To visualize what crown is, look at most modern bridges. The center of the bridge […]

Tim Carter shows off the first wood floor support beam in place on top of the four 6 x 6 posts. All the post notches are in contact with the bottom of the beam providing a continuous load path down to the poured concrete piers. For more DIY Shed building tips and information and to […]

How to Make a Wood Floor Beam Tim Carter shows step one of how to create a beam for a wood floor system. He talks about how to create a splice. Part two of the process is in the next video in this playlist. For more DIY Shed building tips and information and to purchase […]