Q&A / 

How To Drill Hard Steel Video

How To Drill Hard Steel Video

Drilling steel or metal is harder than drilling wood. If you don't know how to drill steel, you can dull your drill bits quickly. Be sure to use a drill bit designed for steel, such as a cobalt bit. Wood drill bits have a special point that were not work with metal.

This column was SO GOOD that I shared with the 31,000 subscribers who read my September 17, 2014 and the  January 13, 2017 AsktheBuilder Newsletter.

Use a little oil on the steel to lubricate and cool the drill bit. Heat will dull the drill bit rapidly. Drilling in steel requires a slower drill speed. Too fast and more heat is generated.

Place a block of wood under the steel workpiece. This will allow the drill bit to go into the wood, instead of dulling the bit on a piece of concrete.

As long as you have the proper sharp bit, a little oil and a variable speed drill, you can drill through steel or sheet metal without damaging the drill bit.

Free & Fast Bids

CLICK HERE to get FREE & FAST BIDS from local handymen that can drill through steel for you.

Best Drill Bits For Metal

Here are some amazing bits that will drill through steel or any metal. Remember, go SLOW!

These are great cobalt drill bits for metal. Always get cobalt. CLICK THE PHOTO NOW FOR A VARIETY OF COBALT BITS. YOU'LL HAVE THEM AT YOUR HOUSE IN DAYS.


Author's Note:

I received the following tip from John Gibbs of Ontario, Canada. Based on his years of experience as a tool and die maker, John provides this excellent tip.

"Hi, I am a retired 71 year old tool and die maker ... worked at my trade for 53 years.

I recently saw the video on how to drill through steel. It was very good. But if you needed to enlarge that hole, then the larger drill bit will often vibrate and produce a chatter which gives a terrible 5 or 6 sided edge instead of a smooth accurate edge to the hole.

The solution is to simply use a piece of emery cloth. Fold about a 1 X 2 inch piece of emery cloth in half, with the smooth side on the OUTSIDE, to avoid scratching the work piece. Place it over the hole to be enlarged, place the drill bit on the emery cloth over the hole and begin drilling. It will automatically center itself. The emery cloth will let the drill bit through smooth and easy, and produces a beautiful smooth edge without a trace of chatter.

Works every time. This is a tip I learned as an apprentice in England. I hope that you find this interesting. It's one of the best tips I was ever taught. Would make a nice little 2 minute video probably."

Drill Hard Steel

DRAWING CREDIT: John Gibbs

CLICK HERE to get FREE & FAST BIDS from local handymen that can drill through steel for you.

SPONSORS / 

23 Responses to How To Drill Hard Steel Video

Leave a Reply

Your email address will not be published. Required fields are marked *