Q&A / 

Whole House Fan Sizes and Manufacturers

There are several manufacturers of whole house fans. Some are small companies and other are huge. There are also some in-between companies. The actual fans are not really complicated. They consist of a housing to support an electrical motor and the fan blades. The better fans have better electric motors and better balanced blades. As you might expect, these fans cost a little more.

I have listed some average sized fans and their capacities below. The fans I have listed that are made by the Broan company are considered high velocity fans since they push more than 3,000 cubic feet of air per minute (CFM). I have also listed a low velocity fan after the following table that has two separate sets of blades. This one is made by Tamarack Technologies.

Broan High Velocity Fans

Model # CFM Maximum House Square Footage

2200

3,300

1,100

2224

3,600

1,200

2230

5,100

1,700

2236

6,850

2,300

The Tamarack Technologies fan is the HV1000. It has a neat special insulated cover that closes over the fan blades when the fan is off. This feature eliminates cold drafts in the winter or hot air from entering the house if you are using air conditioning.

Whole House Fan Manufacturers

Here is a list of companies that still make whole house fans. Get some free product literature and a list of suppliers in your area!

  • Air Vent, Inc.

  • Broan

  • Cool Attic

  • Fan America, Inc.

  • Kool-o-Matic

  • L L Building Products

  • Fasco

  • Lomanco

  • Tamarack technologies

Companion Articles:  Cooling With Mother Nature and Whole House FansWhole House Fan Installation Tips,, Cooling Comfort With Whole House Fans

Column B276

SPONSORS / 

Leave a Reply

You have to agree to the comment policy.