Q&A / 

DIY Shed AsktheBuilder Shed Pier Anchor Position Video

Tim Carter uses a cardboard cutout to show how the wood 6 x 6 and the hold-down anchor must be aligned on top of the diy shed piers once they're poured.

For more DIY Shed building tips and information and the actual plans for the shed in this video, click the following links:

SHED PLANNING: https://www.askthebuilder.com/how-to-plan-a-shed

SHEDS for STORAGE: https://www.askthebuilder.com/storage-sheds

GARDEN SHEDS: https://www.askthebuilder.com/garden-sheds

SHED RAMPS: https://www.askthebuilder.com/shed-ramps/

ACTUAL SHED PLANS: http://go.askthebuilder.com/plans


One Response to DIY Shed AsktheBuilder Shed Pier Anchor Position Video

  1. Hello Tim,

    Your videos has been such a tremendous help for me. I'm fixing to start my shed, and I have been watching all these videos. I have a question:
    - My shed will be in a slope area, with one side reaching as high as about 7' and the other side will be at ground level. I'll have piers and posts on the sides and in the middle. My question is, This hold-down anchor, is it OK for a shed this high? Or should I use some post base? - The dimension of the building will be 14x20, I'll use 2X10 instead of 2x8 as my beams...

    Thank you SO much!

Leave a Reply

You have to agree to the comment policy.