Q&A / 

Gutter Protection Video

Important Author’s Note Update: Since this column was written, I have discovered at least two other gutter guards that sport the micro-mesh filtration screen. Testing of these Micro-mesh guards began early Spring of 2008. The results of the test are in! After 10-years of testing various types, a winner has been declared! Click for the gutter guard I installed on my house - Gutter Guard Test Results.

gutter guard installed

This is the best gutter guard I've ever tested. A stainless-steel micro mesh prevents any pine needles from getting into the gutter. Copyright 2017 Tim Carter

Good morning from the roof of the AsktheBuilder World Headquarters. It is early spring, and Tim met the inventor of a really cool gutter protection system. This system has a very fine mesh covering. That is important because in all previous tests of gutter guard systems, in the spring most of the systems fail. The small debris that trees produce, like seeds, blossoms and little pieces of bark, clog up other gutter protection systems and even work their way down into the gutter.

Free & Fast Bids

CLICK HERE for FREE & FAST BIDS from local companies that can install micromesh gutter guards.

Consider purchasing a micromesh product from Amazon.com and having your local handyman install them for you. CLICK the photo below for just one of the micromesh products I discovered on Amazon:

inspecting gutter guard

There are many micromesh gutter guard products. You can save LOTS of money putting them on yourself. CLICK ON THE IMAGE to see how low-cost they can be.

These gutter guard systems have been tested on the AsktheBuilder’s roof. The first one ever installed was a plastic protection system with diamond shaped holes in the covering. It has been installed for about eight - nine years. It allowed water from a garden hose to sprayed into the gutter to clean out the small debris. But the holes would get clogged up with those little helicopter seeds and the lacy blossoms from the oak trees. This system is being removed and replaced with a newer system.

The new system looks like a very large bottle cleaning brush or pipe cleaner. According to the inventor, you just put it in the gutter. When it gets clogged, and it will, you just pull it out, shake it clean and place it back in the gutter. Not sure if that will work, but it will be installed and tested for the next four to five weeks during the spring season.

Check back later for the next video showing the results of Tim’s testing of this new gutter guard system at the AsktheBuilder World Headquarters.

SPONSORS / 

Leave a Reply

Your email address will not be published. Required fields are marked *