Sheathing

DEAR TIM: I'm trying to educate myself about new construction as I'm thinking of building a new home. I see carpenters nail on large sheets of wood onto the wall studs. What's the purpose of this funny looking material that appears to be made from scattered chips of wood? It seems that it could rot easily if not protected. I asked a worker on a jobsite what the material is and he said sheathing. Is that correct? Tony T., Lebanon, OH

DEAR TONY: The material you probably saw was OSB sheathing. The OSB stands for oriented strand board. This building product has now become the mainstay material to cover both exterior wall studs and roof framing members. Years ago, when I was still a pup carpenter, plywood was the king of both wall sheathing and roof sheathing. OSB sheathing has now pushed plywood to the back buildings of the lumber yards.

This house under construction is using a newer sheathing that's designed to repel water. PHOTO CREDIT:  Tim Carter

Go back 70 years or more, and solid wood was the sheathing that was used on houses. It was tongue and groove and often installed diagonally on walls and floors. To save money on building, the carpenters first used this wood material to build the forms for early poured-concrete foundations.

Once the concrete was set and hard, the carpenters carefully took apart the forms and reused the 1x6 lumber on the floors and walls of the houses. If you look at older homes and see this material, you can often see the drips and stains from the concrete.

The fiberboard sheathing you see on the new homes you inspect serves several purposes. First and foremost it's a structural material. When the sheathing is nailed to wall studs according to the written specifications of the manufacturer and the building code's minimum requirements, it prevents the walls from racking side to side.

The wall sheathing allows a worker to drive a nail anywhere on the wall allowing him to secure a finished product. But keep in mind it's always better to nail into a vertical wall stud as well as the wood sheathing.

Understand that a frame wall can easily collapse like a cardboard box that you flatten once the top and bottom flaps of cardboard are wide open. When a cardboard box is closed and taped it's very difficult to flatten it.

Imagine if you built a wall using 2x4s and didn't cover it with anything. If you nailed the bottom plate to the floor after standing the wall up and then went to the end of the wall and pushed it forward, you could easily flatten the wall. Can you think what might happen to a house without wall sheathing if a strong wind pushed against it? Wall sheathing prevents houses from falling over.

You're correct in noticing that the wood sheathing can rot if exposed to water. This is true for any framing lumber that's not treated with a chemical, coating or covered with a waterproof material. Carpenters of old knew this and covered the side walls of houses with asphalt-saturated felt paper. They also put this felt on roofs under slate, tile and shingles to create a secondary barrier to water.

Today there are modern water and air-infiltration barriers that builders can apply over the OSB wall sheathing. These products are somewhat cumbersome to apply and require tape at the seams where the wrap overlaps itself.

You can purchase wall and roof sheathing that eliminates the modern wraps. This OSB sheathing comes from the factory with a plastic coating that repels water. You tape the seams while the wall is being constructed flat on the ground. This new sheathing material can save money and time because you effectively skip a step in the current building process.

This new sheathing material may become the new gold standard in the progression of wall sheathings because of its innovation. Builders are constantly looking for products that save time and money, but not at the expense of quality. The jury is still out on the true lifespan of this new product, but if the coating doesn't delaminate and the tape adhesive can last 100 years or more, it could be a real winner.

As Kenny Chesney said in one of his songs, "Only time will tell, but it ain't talkin'." Our kids or grandkids will discover the results.

Water is indeed the enemy of wood framing. It's imperative that you or your builder make sure that the wood can stay dry or dry out rapidly if water somehow gets behind the exterior finished surface of your home.

The courthouses of America are filled with lawsuits about rotting homes of all types. The science and skills required to keep homes dry seems to escape many rookie builders. This is indeed a problem in the industry as there doesn't seem to be any formal education system in place to pass down the time-tested secrets and methods that are known to keep exterior walls dry.

Column 856

Deck Sealer Test Results – Part 2 Video

Deck Sealer Test Results - Part 2

NOTE FROM TIM CARTER - Founder of AsktheBuilder.com - posted October, 2016: I no longer would apply Defy deck sealer to any exterior wood that I own at my own home.

Hi, I'm Tim Carter from AsktheBuilder.com. Today is October 12, 2010 and I want to show you the results of the deck stain test that I started on April 30th of this year. I am wearing my favorite fall shirt to honor Mother Nature and her great light show she puts on for us in color with all the fall trees. My shirt doesn't match what Mother Nature offers.

Here are some of the color of the trees around the lake.

Let's go ahead and look at the dock and see what happened in our test. So look at this. Here's our first stain. This is Extreme Defy in Cedar Tone that looks just as good as the day it was applied, in my opinion. It still repels water and there is no mildew.

Immediately next to it is the Extreme Defy in Clear. In my opinion it failed the color test. The test boards are gray. They are just as gray as the untreated boards. It still repels water, which is good, but as far as the color it is pretty bad.

The next sample is Sherwin-Williams Deck Stain in clear. Same thing - it failed. It is very gray. About as gray as the untouched boards adjacent to it. But it still repels water.

Finally, this last section (sorry for the sun shadow) was cleaned at the start of the test, but no sealer was applied. This is the control to see what it would look like if you did nothing. As you can see the two sealers to the immediate left of the control board has the same coloration as the control boards.

So here it the bottom line. If you are going to put a deck sealer or stain on your deck, the test is conclusive. If you want it to look good for at least a year or longer, you are going to have to buy one with a color pigment in it. The color pigments act as a sun screen to help the wood from turning gray. And next spring, I am going to do an extensive test of name-brand sealers similar to this test.

Electric Chainsaw vs Gas-Powered Chainsaw Video

Hi, I'm Tim Carter from AsktheBuilder.com. Let's do a neat demonstration. Let's see if an electric chain saw can do as good a job as a gas-powered chain saw. Both units have brand new blades and they weigh about the same. The blade length is about the same on both. So it should be a pretty equal test. Let's see how they do cutting through this 6-inch piece of hard maple.

Now, I know I don't have a face shield and don't have chaps on. I understand all that, but I am going to wear eye protection and I have glasses on and some good safety gloves. Let's see what happens.

First the gas-powered chain saw cuts through the log. That wasn't bad. It cut through like butter. Next we will see what happens with the electric chain saw.

Well, you saw it. The clear winner was the gas-powered chain saw. However, the electric saw did a pretty good job. I am confident that it will do good in the forest. I am going to check it out. (Extension cord doesn't reach!) Oh, maybe not.

 

       

The above is an affiliate link. I get a tiny commission if you purchase this item from Amazon.

Redwood Decking

redwood decking

This sample piece of redwood decking looks normal, but it’s not. It has a special profile that allows it to resist rot longer. Also this piece of wood decking has almost vertical grain. Note on the edge facing you the dark summer grain wood lines are nearly straight up and down. This wood grain profile is best for decking and ensures you don't have shards of wood peeling up from the deck that is common with flat-grained lumber. PHOTO CREDIT: Tim Carter

DEAR TIM: I'm about to build a new deck and really love the look and feel of real wood. All the composite decking materials try to mimic wood, so there must be a reason for that. I've got my eye on redwood decking and wonder if it's really all it's cracked up to be. Have you ever installed a redwood deck, and what can you tell me about the material? Are there any special considerations or new products that will allow the wood to last longer? What's involved in redwood deck maintenance? Bobbie M., Durango, CO

DEAR BOBBIE: I've worked with redwood for years as a builder and carpenter. I'd be lying if I didn't tell you I'm smitten with it. Not only is redwood gorgeous, it's naturally rot resistant. Granted, it's not as durable as oak or maple when it comes to hardness, but it makes up for this in so many other ways.

I agree with you about the plastics industry. For as long as I've been a builder, the vinyl siding business, the composite decking manufacturers, and even companies that make plastic interior trim moldings have tried to copy the look and feel of natural wood. That alone validates your personal attraction to wood.

It's my feeling that wood is hard coded into our DNA. Our ancestors used it to survive by making shelters, enlisted it to stay warm and dry, and made use of it as a cooking fuel. What I also love about wood, especially redwood, is that it's a crop not much different than wheat, corn or potatoes. The only difference is that the harvest time for redwood and other trees takes place after several years instead of months for most food crops. The bottom line is that we can grow redwood rapidly and continue to enjoy it for generations to come.

I used redwood on the last home I built for my family. It was used for all the siding and virtually all of the exterior trim. I didn't have a deck like you want, but I've installed quite a few redwood decks that still look as good as the day I drove the last stainless steel nail.

I love redwood because it's easy to work with and it has natural chemicals in it that make it rot resistant and not too tasty for most wood-destroying insects. It holds paint very well if you use it for a handrail. When you go to apply your redwood deck finish, you'll discover it readily accepts penetrating stains that will help preserve the natural grain and color of the redwood.

Understand that when you decide to use wood outdoors in just about any other location other than the Atacama Desert, where it often doesn't rain for decades, water is the enemy of wood. Redwood can be damaged by water, it just takes longer than other woods that you expose to water.

It's imperative that water not pond on horizontal deck boards and that water is allowed to drain away from between decking boards as rapidly as possible. The way redwood and many other lumber was milled for years produced boards that had parallel faces on each piece of lumber. While this seemed like a good idea at the time, it turns out that water could take advantage of this profile.

EB015 Cleaning & Sealing Deck eBoo CoverYou can now purchase redwood deck boards that have a very unique profile. The top surface of the boards has a slight crown to it like a roadway. This means the center of the board is slightly higher than the edges. Water readily flows off the top surface of the board.

The edges of the new redwood lumber are canted inwards slightly so that when two boards are placed next to one another, the gap at the bottom is wider than the top. This promotes excellent drainage and prevents organic debris from getting trapped between the separate pieces of lumber. Trapped organic debris holds water and accelerates wood rot.

Finally, the lumber mill cuts in two drip channels on the bottom of each board along the entire length. These grooves cause water that rolls under the wood to drip off the lumber instead of soaking in the underside. All of these things help extend the life of the redwood.

When choosing a redwood deck cleaner, I urge you to use oxalic acid or try a mild liquid dish soap and water. Avoid oxygen bleach as it can sometimes darken redwood. If your redwood darkens, you can often rejuvenate it by treating it with oxalic acid.

If you decide to use redwood for your deck, understand that this lumber comes in different grades. Some redwood is clear and free of knots. This is usually the most expensive.

You can get redwood that is less expensive that has tight knots in it. This grade is sometimes called Construction Grade. It will perform as well as clear, but it just lacks that perfect appearance.

Be sure to read all the written installation instructions published by the California Redwood Association before you construct your deck. Pay attention to the type of fasteners you're supposed to use. I would only use stainless steel nails or screws myself.

Column 854

Electric Chain Saw

DEAR TIM: I'm considering purchasing an electric chain saw. I've never used one and wonder if they really cut as well as a gas-powered chain saw. What are your feelings about these tools? If I need to use one where there is no electric, I imagine I could use a portable generator. Can you share some tips about these saws in case I do buy one? Victoria K., Denver, CO

DEAR VICTORIA: I've got both a gas-powered chain saw and an electric chain saw. If I were to blindfold you and place them in your hands one at a time, I doubt you could tell the difference.

gas-powered chain saw

This looks, feels and operates just like a gas-powered chain saw, but the electric cord at the handle tells a different tale. PHOTO CREDIT: Tim Carter

The weight of the two tools is comparable, they look nearly identical, and both saws have virtually the same controls that operate the blade and shut it down in an emergency.

What you may be wondering is if the electric chain saw has enough power to cut through wood. The answer is yes, so long as you purchase one that has enough horsepower or gusto. My electric chain saw has a 16-inch blade and a 3.5 hp electric motor.

The cutting action of a chain saw, in my opinion, results from three things. The sharpness of the blade, the speed of the blade moving across the wood, and the weight of the saw.

An electric chain saw with a razor-sharp blade will outperform a gas-powered saw all day long all other things being equal. A dull saw blade just spins creating lots of friction, smoke and frustration.

The electric saw I have really works well when you pull back the trigger all the way. The blade spins incredibly fast allowing the cutting teeth of the blade to vigorously bite into logs over 2-feet in diameter.

You can push down on a chain saw with your arms to have the blade bite more aggressively into the wood, but why not have the saw do that for you? This means a slightly heavier saw will allow gravity to pull the blade down into the wood. But there is a sweet spot. You don't want the saw to be so heavy you get fatigued.

I feel an electric chain saw is a great tool for around the home. You know it will operate as soon as you pull the trigger, assuming you have power at your home. Gas-powered saws can be tough to start if you don’t maintain them.

As for using a generator to power the saw in a remote location, that seems like a little bit of overkill and expense. After all, you need to feed gasoline and oil into a generator, so you might as well just carry one tool, a gas-powered chain saw, into the woods.

To minimize your work, use a high-quality chain saw sharpener to keep your blade in perfect condition. Don't cut close to the ground. Don't ever allow the blade to touch the ground as the dirt and small rock particles will rapidly dull the blade. Brush off all dirt from logs and the bark to keep dirt from dulling a blade.

Be sure to use electric chain saw oil to keep the blade lubricated. This is mission critical. Monitor the oil reservoir on the saw every few minutes so you ensure it never runs dry. Fill it when it gets to the half-full point as you need to make sure the blade gets oil at all times as you rotate the saw up and down as you cut.

Above all, read the Owners Manual. Read and understand all the safety warnings. Don't cut logs or trees that are wedged or in a bind. The weight of the log can close down on the blade, or the tree can shift as you cut it. Serious injury is always a possibility if you don’t know how to use these powerful tools.

Many safety improvements have been made with chain saws, both electric and gas-powered, but understand they still can hurt you in a fraction of a second.

My father-in-law cut his leg many years ago in an injury that could have cost him his life. He still doesn't know what happened, but somehow the saw jumped out of the log and sliced into his leg in the blink of an eye.

Wear all the recommended protective clothing, gloves, helmet, face shield, etc. when using a chain saw.

Related Column: Stihl Electric Chain Saw Review

Column 853

October 14, 2010 AsktheBuilder Tips And News

What's in This Issue?

Glassy Golf Course
Pocket Door Installation
Tim Carter Meet & Greet

I do product reviews frequently. Please read my Disclosure Policy to understand the relationship between me and the companies that make the products or offer the services I review.

FOLLOW ME ON TWITTER

Friendly Question Reminder!

If you have a question for me, don't hit the Reply button just yet. Go immediately to my web site and type in the keywords about your problem into my Search engine. The search box is at the top of every page of my web site. You could have your answer in seconds if you do this! Please pay attention to all links you see at my web site. The exact products and services you often need are right in front of you, and you might be ignoring them.

Three quick things to cover:

Glassy Golf Course in Greenville, SC

Do you live at The Cliffs in Greenville, SC? Can you email me?

Install a Pocket Door in a Jiffy

Let's say you really want a pocket door but there's a pesky heating duct, a plumbing stack, a massive structural column or something else hidden in the wall where you want the door to nest. Guess what? You can still do the door!

All you need is a sleek wall-mount door kit. This technology is time-tested. All you have to do is talk with any farmer/rancher who has massive barn doors that ride on wall-mounted tracks. Installing a regular residential door is nothing compared to the large doors that have worked well for many years for farmers and ranchers.

If you can create the opening for the door with no hassle, you can have the door project completed in a weekend.

Check out the wall-mount pocket door hardware from L.E. Johnson. That's the company I use for all my pocket doors.

Tim Carter LIVE and FREE in New Hampshire this Weekend

This is a quick reminder blast about the FREE Live Event I'll be at in just two days! It was brought to my attention that the newsletter you just got two days ago didn't go into enough detail, especially if you're a new subscriber. I keep forgetting that each week you may be part of 1,200 or so new subscribers that jump on board the AsktheBuilder.com Newsletter Express.

Here's the deets (details :-> ).

I'm going to be at a great kitchen cabinetry showroom in Lebanon, NH this Saturday, October 16th, from 10 am till Noon. Come see me at Cabinetry Concepts at 227 Mechanic Street, just off Interstate 89. While there, I'm going to discuss briefly the top three questions I get at AsktheBuilder.com week in and week out. You'll be surprised what they are.

Then, I'll begin to take your questions about your own home-improvement issues that you may be faced with. That's what I used to do on my radio show for 12 years - answer live questions. It's lots of fun. I urge you to bring photos of your problems. That makes it easier to diagnose the problem. If you want me to review plans for one of your projects, I'll do that.

Not to mention that the folks from Cabinetry Concepts will be there to answer any kitchen or bath design questions you may have. Oh, and guess what? There's a ceramic tile and flooring store that on one side of the Cabinetry Concepts store and on the other side a lighting showroom. You can see the latest of just about everything you need for an upcoming project.

But it gets better. Why should you drive perhaps 200 or 300 miles to get to this event? The door prizes and coupons we'll be giving away are amazing. You WILL walk away from this event with some very valuable coupons, potentially worth thousands of dollars, and you MAY have some sweet tools and other loot to take home. I've gathered well over $2,000 worth of tools and gear to giveaway as door prizes.

Everyone who attends the live event is going to get a special coupon from Plato Woodwork for a discount on new kitchen or bath cabinets. Kathy and I are using Plato cabinets in our new kitchen here in New Hampshire.

That's how I came to know the great folks at Cabinetry Concepts. This coupon could easily be worth several thousand dollars if you have a major kitchen remodeling on the horizon. I'm not making this up.

In addition to that, here's what I have right now sitting in my truck waiting to go up to Lebanon this Saturday:

  • Metal Pegboard and hanger accessories from Wall Control 
  • Free Tile Installation books from Matt Seillig 
  • Tomboy Tools Toolkit with Lightish Red carrying case PLUS the electric mini-driver! 
  • Gorilla Glue samples, Gorilla Tape, Gorilla Gear 
  • Dremel Trio Tool 
  • Two FREE 5-gallon pails of Extreme Defy Deck Sealer 
  • Two FREE 5-gallon pails of Extreme Defy Masonry Sealer 
  • Dremel Multi-Max Tool 
  • Worx 16-inch electric chain saw WG303 
  • Craftsman Lithium Ion Right Angle Impact Driver 
  • Campbell Hausfeld Recreational Inflation Kit 
  • Campbell Hausfeld Home Improvement Project Kit

Furthermore, Cabinetry Concepts is putting together some prizes for the first so many people that walk in the door. Bottom Line: LOTS of LOOT and LOTS of Free Answers from me.

I'm sure we'll hear your lamentations if you miss out and don't make it.

Seriously, I haven't done an event like this in years and have no idea when the next live event may be. You deserve to come. Treat yourself to a day in the Upper Valley of New Hampshire.

Please email me or register at the Cabinetry Concepts website so we know who's coming.

AsktheBuilder.com
100 Swain Rd.
Meredith, NH 03253, USA

October 12, 2010 AsktheBuilder Tips And News

What's in This Issue?

Maria Atwood Inn
Pressure Washer Accessory
Stain Solver News
Late-Season Deck Sealer
Live Event
Gravel Driveways
Don't Trip in the Dark

I do product reviews frequently. Please read my Disclosure Policy to understand the relationship between me and the companies that make the products or offer the services I review.

FOLLOW ME ON TWITTER

Friendly Question Reminder!

If you have a question for me, don't hit the Reply button just yet. Go immediately to my web site and type in the keywords about your problem into my Search engine. The search box is at the top of every page of my web site. You could have your answer in seconds if you do this! Please pay attention to all links you see at my web site. The exact products and services you often need are right in front of you, and you might be ignoring them.

We've had a string of gorgeous days up here in New Hampshire. The color of the leaves here in central NH is peak right now. It's absolutely breathtaking seeing some of the trees. Yesterday I saw a tree that was the most brilliant orangish-red. If you didn't know better, you just thought it was fake.

I received an email from a close friend of mine, Fred Hoffmeister, last week. Fred and his wife Sandi are the innkeepers of the Maria Atwood Inn in Franklin, NH only 20 miles from me. Fred was lamenting about how busy they were with all the guests, and that each of them was asking for the delicious scones that Sandi makes.

The scones have become the bane of Fred's existence since I taped a video about them several years ago. The video is at the bottom of the Atwood Inn home page. At the time, we were trying to drum up business for the inn. Well, it turns out the video is pretty popular and Fred's now too busy - if that's even possible. Fred, you know the old saying, "Be careful what you wish for!" :->>>>

In all seriousness, if you plan to come up to NH, you should stay at Fred and Sandi's place. It's a fantastic B&B. Ask for the White Mountain room on the third floor. That's where I stay whenever I'm there. Be sure to ask if they have some of the maple butter to slather on the scones.

UPDATE: Sadly, this wonder Inn has closed.

Pressure Washer Accessory

About two weeks ago, I received a very cool accessory that you can use with any pressure washer. It's called Spray Glide.

If you're using a pressure washer on a surface that can be damaged by the powerful stream of water coming out of the wand, you have to be very careful. If you get distracted or when fatigue sets in, the wand, in an instant, can get too close to the surface. BAM! You just messed up the wood deck or whatever you're cleaning.

The Spray-Glide tool clamps onto the wand with Velcro-like material and allows you to infinitely adjust the distance from the wand tip to the surface you're cleaning. It's got a nice wheel on it allowing you to just push the pressure-washer wand as you would a vacuum cleaner.

The Spray Glide folks have alerted me to a special deal on this tool that only lasts for the next FIVE days. You get a huge discount AND Free Shipping.

You'll love this tool. It's a must if you clean decks, docks, roofs or driveways.

Stain Solver News

If you're a new subscriber to this newsletter, you may not know about Stain Solver. It's a fantastic oxygen bleach I've made for about 15 years. All the ingredients are made here in the USA, unlike many of my competitors who get their ingredients off the west coast about 8,000 miles away. But I digress.

About a week after I moved Kathy from Cincinnati, OH to here in New Hampshire, our dog had an encounter with a skunk around midnight. I was awakened from a deep sleep to deal with the horrific odor. Lady, our German Shepherd dog, was not in any discomfort, but she smelled BAD. I knew instinctively that Stain Solver would get rid of the odor.

I mixed some up and carefully applied it to her fur and it did the trick. I was careful not to get it in her eyes or mouth. The skunk odor was gone instantly from her fur. As you can imagine, it does the same for just about any odor, including pet urine. If you have a pet that might tangle with a skunk, you may want to have some Stain Solver on hand for this emergency. You want the odor gone immediately.

Overnight we got two large orders from managers of hotels for Stain Solver. We're making the calls this morning to discover what they want to use it for, but I suspect they want to clean the grout in the hotel lobbies and food-service areas. Stain Solver does an incredible job cleaning tile grout. In fact, if you work at a hotel or motel in central NH, I'd love to stop by to tape a video showing how well it works. Email me if this is you.

Late-Season Deck Sealer

Today I'm taping the final video for the deck stain test I started on April 30th down on my dock. The winner was Extreme Defy in Cedartone. That's a medium-brown color.

The owner of Saver Systems, John Meredith, was generous enough to give away 4 of the 5-gallon pails of Extreme Defy as door prizes to the live event I'll be at this Saturday October, 16th. More on the live event in a moment.

But John felt bad for you in case you can't make it up here this Saturday for any number of reasons. He's developed a special page at his shopping cart just for you if you want a great deal on his colored Extreme Defy products. If you want to buy now and use the product in the spring, just keep it indoors from freezing temperatures.

Wait until you see the video I tape today. The Cedartone color of Extreme Defy looks like the day I brushed it on. It's gorgeous. All the other products I put on failed the color test. They still repel water, but the wood has turned gray.

Live Event

This is just a reminder. I'll be at Cabinetry Concepts in Lebanon, NH this Saturday (October 16, 2010) from 10 - Noon to answer your questions about anything home improvement.

I'll have an enormous amount of different door prizes to give away. Plus, Plato Woodwork is giving away to all who attend an unbelievable coupon that could be worth thousands of dollars depending upon the size of your upcoming kitchen remodel job. It's well worth the trip if you live even 200 miles away!

Gravel Driveways

If you're going to install gravel on a pathway or on a drive that gets traffic, don't make a mistake I see happen all the time. Do NOT use rounded gravel of any type. You must use a crushed gravel. Rounded gravel moves too easily and will not provide great traction. Crushed or angular gravel pieces interlock with one another so the surface doesn't move hardly at all.

The gravel that works best as a top coat is one that has pieces no larger than 1 inch on any face and also has smaller pieces of angular gravel along with some fines. Fines are almost the size of sand and help knit the larger pieces of stone together.

This gravel works great for footpaths in a garden setting.

Don't Trip in the Dark

If you live like I do in the northern hemisphere, the days are getting shorter. What's more, we're about to lose an hour of daylight when the time changes soon. This means you're awake more when it's dark, and tripping in the dark while fumbling for a light switch could be problematic.

I received for testing some handy accessory light-switch plates that help you see where a wall switch is in the dark. These cover plates have strips of the glow material built into the cover plate. This product is worth a look see.

AsktheBuilder.com
100 Swain Rd.
Meredith, NH 03253, USA

October 5, 2010 AsktheBuilder Tips And News

What's in This Issue?

Rugby
Pink Tool Belt
Bathroom Mold
Desperately Need Your Help
Business Survey
Latest Columns
Fire Pit

I do product reviews frequently. Please read my Disclosure Policy to understand the relationship between me and the companies that make the products or offer the services I review.

FOLLOW ME ON TWITTER

Friendly Question Reminder!

If you have a question for me, don't hit the Reply button just yet. Go immediately to my web site and type in the keywords about your problem into my Search engine. The search box is at the top of every page of my web site. You could have your answer in seconds if you do this! Please pay attention to all links you see at my web site. The exact products and services you often need are right in front of you, and you might be ignoring them.

On Sunday Kathy and I drove to Burlington, VT to visit our son up in college. He's playing rugby for the Champlain College Rugby Club. All I can say about rugby is that it's the best mashup of soccer, hockey and football one could ever imagine. It reminded my of some very physical games of touch football I played back in high school with no pads and on hard ground with bodies flying into one another.

We're in the final stages of selecting new kitchen cabinets for our home here. This winter there's going to be a boatload of new videos going up documenting that project. Speaking of new videos.....

Pink Tool Belt

Three months ago, I got a great email one morning from John Davis who subscribes to this newsletter. He was passing through Meredith, NH on the way to pick up his 11-year-old daughter Christine from an island camp nestled out on Lake Winnipesaukee.

For years, I've extended an open invitation for you to visit if you're in the neighborhood. John pulled that trigger. He and his daughter came over and we sat on the deck chatting drinking some iced tea, I believe.

Somehow the discussion moved indoors and involved my website and tools. Christine was amazed that I used the Dvorak method of typing. I showed her one website I'm familiar with that sells tools for women - Tomboy Tools. She pointed out that she'd love to have a pink tool belt. My response was, "Christine, that's easy. Let's email my friend Cindi Dugger."

Cindi is a rep for Tomboy Tools and is another subscriber to this newsletter. She's reached out to me for years to look at tools and we've become virtual friends as I may be with you. I've been blessed to have quite a few friendships that have spawned from this newsletter.

While Christine was still at the house, Cindi replied saying the tool belt would be shipped the next week. When I announced that Cindi had replied, the look on Christine's face was one I'll never forget. She was stunned it happened so fast and that she would get the pink tool belt.

But before sending the tool belt to Christine, I told Cindi I would do a video about it extolling its virtues! I'd appreciate it if you would pass this video around to all the friends on your email list. It would be interesting to see if this video has what it takes to go viral.

Finally, if you're looking to acquire some great pink tools as Christmas gifts, now's the time to act. Who do you know that might want the tool belt or any of the pink tools you see me show in the video? To get them or any TomBoy Tool, just visit Cindi's TomBoy Tools page. You can navigate quickly to see all the tools in the line.

Bathroom Mold

As you might imagine, I get many questions about mold issues in bathrooms. You may be waging a losing battle with it in your own home. Mold needs three things to grow: the mold spores, a food source and water. That's all.

Guess what? Two of the three things are around your home all the time: the spores and the food. You can control the third component if you work at it. Starve the spores of water, and the mold has a very hard time growing.

In your shower and tub area here's how to really cut down on mold growth. After showering, you must get rid of all surface water. This means using a squeegee to make the walls and shower floor free of water. Shake all water off the shower curtain and wipe down any glass doors. Leave the shower curtain open and the same with a shower door. You want that area to dry rapidly.

Towel dry the surfaces if possible. Use rags if you don't want to use your towel. Leave the bathroom door open to get air with lower humidity into the room. Use a bathroom exhaust fan that exhausts the humid air to the exterior of your home, not the attic space.

Bottom Line: Get the bathroom as dry as you can as fast as possible.

Desperately Need Your Help

While on the topic of mold, if you're new to the newsletter, I've sold my Stain Solver oxygen bleach for years. It does a fantastic job of cleaning mold from grout and surfaces. It also removes stain of just about any type from any water-washable thing.

About two weeks ago, we started selling Stain Solver on Amazon.com. It turns out we've tilted one of their algorithms. We got an email today telling us that we've sold TOO much in too short a time without having enough user feedback.

As with many websites now, they look for customer reviews. If you're a Stain Solver fan, can you please go to Amazon's home page and type stain solver in their search engine.

When you see the product in the search results, select the size you purchased in the past and go to it's page. About halfway down, you'll see a button to leave a Customer Review. Rate the product for me and leave a review, hopefully with a story about what you cleaned.

Speaking of Stain Solver, there's huge news about it very soon. I can't leak any details now, but when I do, you'll be blown away.

Business Survey - Stay With Me on This

Last week, I did a neat survey about moving a business to New Hampshire. The response was through the roof! Wow! Thanks if you were one who took the time to respond. The big winner in the survey was a 15-year tax holiday on the property taxes for the business. That didn't surprise me one bit. That's a fixed expense that anyone would love to scrub from the accounts payable side of the ledger for over a decade!

That survey showed me that you either work for a small or medium business and/or are the owner. I've also discovered that you may get sidetracked or flummoxed from time to time with computer or technical issues because you don't have what you need. Large companies have access to computerized tools that allow them to analyze data, grow faster and be more productive.

A really good friend of mine is developing web-based tools to give small and medium businesses the ability to quickly do the same kind of business concept and competitor analysis that large businesses have teams of people to do. These tools could really help grow your business in these tough times.

My buddy and I have talked about some of the rough concepts and I can't wait to use them myself. Please take this NEW quick one-question survey if you want to impress your boss or grow your business. It'll take you about 30 seconds to complete.

Latest Columns

Are you thinking of moving? Don't underestimate what it takes to pack.
What are your cable tv options when you want your TV away from the outlet?

Tim Carter's Fire Pit

If you're new to my newsletter, you may want to know about one of my hobbies. Let's just say my Fire Pit website has a little to do with tea and everything to do with preserving our great nation.

AsktheBuilder.com
100 Swain Rd.
Meredith, NH 03253, USA

Pink Tool Belt Video

Hi, thanks for stopping by. I am Tim Carter from AsktheBuilder.com. I am doing a little bit of work on my deck today. When I work on projects like this, I prefer to have all my tools with me. So I want to talk a little about tool belts and how they can save you a lot of time.

This particular tool belt reminds me of the one I have 35 years ago when I first got in the business. This one is made out of leather and has four primary pockets, two on each hip. It also has the center pouch typically used for a tape measure. This pocket makes the tape nice and handy.

The hip pockets normally have the front pocket slightly smaller then the back pocket. The front pocket is ideal for nails and screws or smaller tools. The bigger pockets work great for your standard tools, like a level and pliers.

On this belt, there is a leather loop on the side for holding a hammer. And two slots for nail sets and a pocket for a carpenter’s pencil. On the other side, there is a special pocket for a cell phone. Okay, that wasn’t on my tool belt from 35 years ago. Cell phones weren’t around.

Tool belts will save you a lot of time and money by having a lot of your tools handy.

Wait a minute! Are you laughing at my tool belt? It's the color. Don't be a color hater. It is just lightish-red.

Read the story behind this tool belt.

September 28, 2010 AsktheBuilder Tips And News

What’s in This Issue?

Fall
Crazy Survey
Sleek 2-Foot Level
Toilet Repair
Ghost Closing Door
AsktheBuilder Live Event
Screwpop Tool
Latest Columns

I do product reviews frequently. Please read my Disclosure Policy to understand the relationship between me and the companies that make the products or offer the services I review.

FOLLOW ME ON TWITTER

Friendly Question Reminder!

If you have a question for me, don't hit the Reply button just yet. Go immediately to my web site and type in the keywords about your problem into my Search engine. The search box is at the top of every page of my web site. You could have your answer in seconds if you do this! Please pay attention to all links you see at my web site. The exact products and services you often need are right in front of you, and you might be ignoring them.

 

Fall is here, unless of course you're below the equator and you're celebrating spring! Here in New Hampshire, the trees are putting on a show. The next two weeks should be glorious. Right now we're getting much-needed rain here so that means Mt. Washington should have a crown of snow by weekend.

Last week I captured the most glorious sunrise of my life. I wanted to share the photos with you hoping that you're blessed one day to see something like I did.

There's lots to cover in this issue, so let's get to work.

Crazy Survey

I moved myself, my family and my business to New Hampshire over the past two years. Kathy finally made it up here a little over a month ago. Part of our decision was based on finances. New Hampshire has no personal income tax and no sales tax. Imagine if you're a small business person and had that extra income at your disposal each week/month.

If you're a small or medium business owner, would you consider taking this quick ONE-question survey that will help me? Thanks, it will only take you about 30 seconds, then you can get back to the rest of the newsletter. (Survey is closed.)

Sleek 2-Foot Level

I recently tested a consumer-grade level made by the Empire Level Company. It's a box level, and on their own website they clearly state that it's at the bottom of their food chain. I found it to be a really decent level on par with some of the pro models I've worked with in the past. I can't talk to it's durability over time, as it hasn't bounced around in the back of my truck or fallen off a ladder several times. But if you get this level and take care of it, it should work well for you.

Toilet Repair

Last week Kathy asked me to repair the pesky flapper valve in the master bathroom toilet. It recently started to stay in the up position causing the toilet to run. While I was at it, I decided to replace the filler valve as it was original and looking worse for wear. I've had great success with Fluidmaster products for years and selected them for this job.

The tip I wanted to share was that I also replaced the supply tube or hose that runs from the wall valve to the underside of the toilet. All too often I see people try to reuse the existing supply tube. This can sometimes lead to chronic leaks as the seal at the toilet end of the tube doesn't seat well with the new filler valve. I prefer the newer stainless-steel braided hoses for the supply piping. They're virtually foolproof.

Also, if your shutoff valve works, great. But when you turn the valve back on to fill the toilet, you may have a leak around the valve stem. Tighten the nut on the valve stem about 1/8th turn and that should solve the problem. Always place a dry paper towel under the valve and the filler valve to use as your leak detector. Check on the toilet every 15 minutes to see if you have a drip.

Ghost Closing Door

While I was fixing the bathroom toilet, Kathy also asked me to fix the door to the master bathroom. It had this annoying habit of slowly closing itself. It's a good idea to leave it open so that you get air flow into the bath thus keeping the humidity as low as possible. This helps stop mold growth.

To solve the problem, I just removed the center hinge pin, took it out to the garage and laid it down on the concrete floor. I then took a hammer and whacked the center of the pin putting a decent bend in the shaft. This bent pin created enough friction to stop the door from closing. You may need to do this to all the pins in your door if it's a heavy one.

AsktheBuilder LIVE Event Soon!

I'll be in Lebanon, NH on Saturday October 16th, from 10-Noon at Cabinetry Concepts.

I plan to answer all of your home-improvement questions that morning. We'll talk about the top three questions I get day in day out to start things off. If you live within a couple hundred miles of Lebanon, NH, you really should attend. Why? Get a load of some of the FREE prizes we'll be giving away:

  • Tools from TomBoy Tools courtesy of Cindi Dugger
  • Two Campbell Hausfeld air compressor kits
  • Extreme Defy Deck and Masonry Sealer by SaverSystems.com
  • Workshop Metal Pegboard Kit by WallControl.com
  • Gorilla Glue and Gorilla Glue Gear!
  • Worx 16-inch Electric Chain Saw
  • Bosch Power Tools
  • Dremel Tool kits
  • Free Ceramic Tile Books courtesy of Matt Seillig
  • and possibly more!

It gets better. Plato Woodworks, a very fine cabinet line in the Cabinetry Concepts showroom, is offering a coupon to those who attend the event. This coupon alone, depending on the size of your new kitchen, could be worth thousands of dollars. If that isn't worth a trip to the gorgeous upper valley of New Hampshire and Vermont, I don't know what is.

I'm sure I'll add in a special secret promotion as well for all my products, including Stain Solver. But you'll have to be there to get it.

I'll have links to all the great prizes next issue. Just be aware that I'm giving away some amazing things. You really should come to this event. Wait till you see the Cabinetry Concepts showroom with all the cabinets, tops, flooring materials and the lighting showroom next door. You'll really love what you'll see. If you don't live nearby, but have friends or relatives who do, you should tell them to stop by. They might go home with some great loot.

Screwpop Tool

Tool manufacturers send me tools all the time to review. Some are fantastic and others are ho hum. Two weeks ago, I was sent this tiny screwdriver tool. It has one removable bit in it that works for slotted or Phillips screws. The round handle of the tool has a tab that allows you to open capped bottles that are not equipped with screw threads.

Anyway, I wasn't impressed by the tool as it only will allow you to remove short screws that don't require lots of force to turn. A company representative contacted me about my thoughts and I told him he probably wouldn't like the review. He said to publish the review and was quick to point out that you can use the slotted screw tip to open paint cans. Well, maybe a new paint can, but not one with paint in the rim. You'll ruin the lid using such a tiny tip.

Just the other day, I saw a jar filled with them at my local hardware store in Meredith, NH. I asked Rich, the manager, if they are selling well. Rich replied, "Oh, maybe we've sold one or two." Ho Hum......

Latest Columns

Garage Door Opener

AsktheBuilder.com
100 Swain Rd.
Meredith, NH 03253, USA