Q&A / 

Pex Plumbing Tips

pex plumbing

This is PEX tubing. I'm using a trouble-free UPONOR compression ring to make a connection. WATCH the video below to see it happen in seconds. Copyright 2018 Tim Carter

Connect PEX in Seconds - No Experience Needed!

DEAR TIM: Money is very tight in this current economy and I just can’t afford to hire a plumber to install new water supply lines in my home. I’ve seen the pex piping and feel it's the way to go as there are no soldered joints hidden in the walls.

Is it hard to install pex plumbing tubing? Can you share some secrets and tips? Am I crazy to think that I can be successful doing this? Dan G., Belle Mead, NJ

Related Links

Cut PEX Tubing in One Second or Less!

Prevent Frozen Pipes Using PEX - The Only Way to Go!

DEAR DAN: Not only is money in short supply right now for many, but I feel it's also going to get worse. This is going to cause many to jump in and do home repairs and remodeling not because they want to, but because they have to.

Free & Fast Bids

CLICK HERE to get FREE & FAST BIDS from local plumbers who can do PEX in case you're afraid.

There's lots of opportunity here - to make mistakes and to build confidence. Let's put you in the second group.

pex plumbing

It's important to realize that some cities and towns don't allow unlicensed people to work on the potable water supply systems in their homes. Keep in mind if your home is connected to a municipal water system, water, in certain situations, can flow out of your home and into the water mains outside your home.

If you've made connections to the system that allow polluted water to flow into the water pipes outdoors, you can make many sick. It's serious business.

One Practice PEX Joint and You're a Pro!

Let's assume you're allowed to do the pex plumbing installation work. I feel, with a little practice, you can be successful doing this major job. There are just a few areas where you'll need some sweet skills to ensure you don't have a leak.

Let's talk first about the many advantages of pex tubing and pex plumbing fittings. As you've already noted, since the pex piping is similar to electrical wiring, there are no joints in the pipe if you decide to install a separate pipe to each fixture from your main mechanical room where the water supply enters your house. That one characteristic of pex is an enormous time saver.

PEX Plastic Has a Memory

The pex tubing I've worked with, and had the best success with, is a special plastic that has a memory. Don't ask me how they figured it out, but when you stretch the material it fights to go back to it's original shape and size.

This property allows the piping and little compression collars to grab tightly onto the knurled surface of the male adapter fittings. This is what creates the leak-free connections between the pex tubing and a manifold or a valve at the end of a run.

PEX Expanding Tool - Just Get Hand-Powered One

To stretch the piping, you need a special tool that has an expanding cone tip. As you crank the tool, this cone expands the plastic.

pex hand expander

Here's a PEX hand expansion tool. It's hundreds of dollars cheaper than a power tool. CLICK THE PHOTO now to have this delivered to your home.

The warmer the pipe is, the easier it is to accomplish this. Cold temperatures cause the plastic to react sluggishly. This means it expands slower and goes back to its original size slower.

These special tools come in both hand powered and a sleek cordless electric tool that's very handy. You'll have to get one of these tools to do the job, so give a serious look at the cordless tool. Once you've completed the job, you can sell the tool online if you desire and get back probably 65 percent of the price you paid for it.

Connect PEX Using the UPONOR System

I have PEX in my home and it's the UPONOR system. It has these caveman simple compression collars that keep all joints leak-free. Watch how SIMPLE and FAST it is to make a connection:

Main Manifold May Stretch Your Comfort Level

The only place I can see you having problems is installing the two manifolds in your mechanical room. These are usually made from copper and have a shutoff valve at each port where you connect a water line. You'll have to securely attach the manifold to the wall and do some great soldering to connect the manifold to your water supply.

Some plumbers are moving away from the manifolds and installing pex piping like traditional water supply lines. In these cases you do end up with joints hidden behind walls.

CLICK HERE to get FREE & FAST BIDS from local plumbers who can do PEX in case you're afraid.

If you decide to install your system like this, you need to be very conscious of water pressure and friction losses. You'll have to install a 1-inch main trunk line that eventually downsizes to 3/4 inch and then 1/2-inch pipes that supply each fixture.

Employ Best PEX Practices

Be sure you follow all best practices when working with the pex piping. I would absolutely read any and all information that the pipe manufacturer has available. Be sure you don't pinch the pipe. Drill holes that are large enough for the pipe to pass through easily.

You also need to be aware of all the limitations concerning drilling and notching structural framing members. You just can't go start drilling large holes in floor joists. You can't notch floor joists.

The building code often contains good illustrations that show you exactly what you're allowed to do without compromising the structural integrity of your home. Check what's on the other side of a wood member before drilling. You could penetrate a wire or a gas line!

Practice First With PEX - So Simple

Finally, I would highly recommend testing your skills before you advance to putting the pipe and fittings in your home. Create small test joints where you connect a pex pipe or two to actual shutoff valves.

Then connect these short test pipes to your existing plumbing system. See if you have any leaks. Be sure you understand how to completely expand the pipe, rotating the tool as you expand the plastic and then quickly install the pipe and compression collar over the male end of the adapters before the pipe returns to it's original size.

Don't hope that you have leak-free joints. Remember, hope is the emotion of last resort. You hope for something when you can't control the outcome. In your case, with practice, you can control everything!

CLICK HERE to get FREE & FAST BIDS from local plumbers who can do PEX in case you're afraid.

Column 880

SPONSORS / 

3 Responses to Pex Plumbing Tips

  1. Good write-up on PEX. Please tell me, can you connect PEX directly to a water heater or does it need copper piping between the PEX and heater?

    • I've been a master plumber since age 29.

      I'd install a copper riser about one foot and then transition to PEX.

      Be sure to use the UPONOR system. Watch the video I just inserted above. I should have had it in there before you commented.

  2. What about crimp on copper rings and brass fittings? I've always used those and had good success. One advantage of the rings is that they can be cut and the pipe removed.

Leave a Reply

You have to agree to the comment policy.