Tim Carter shows how to properly notch a 6 x 6 wood post to accept a double 2 x 12 beam. This is the BEST way to provide support to a beam as it provides a continuous load path to the concrete pier below.

For more DIY Shed building tips and information and the actual plans for the shed in this video, click the following links:

SHED PLANNING: https://www.askthebuilder.com/how-to-plan-a-shed

SHEDS for STORAGE: https://www.askthebuilder.com/storage-sheds

GARDEN SHEDS: https://www.askthebuilder.com/garden-sheds

SHED RAMPS: https://www.askthebuilder.com/shed-ramps/

ACTUAL SHED PLANS: http://go.askthebuilder.com/plans

Tim Carter demonstrates how easy it is to calculate how high each wood support post should be using an optical builders level and simple grade school math.

For more DIY Shed building tips and information and to purchase the actual plans for the shed in this video, click the following links:

SHED PLANNING: https://www.askthebuilder.com/how-to-plan-a-shed

SHEDS for STORAGE: https://www.askthebuilder.com/storage-sheds

GARDEN SHEDS: https://www.askthebuilder.com/garden-sheds

SHED RAMPS: https://www.askthebuilder.com/shed-ramps/

ACTUAL SHED PLANS: http://go.askthebuilder.com/plans

Tim Carter demonstrates how to use an optical builder's level. It's important to set up the tripod so it won't tip over on a slope.

It's very important to make sure the bubble in the level vial is perfectly centered when you rotate the optical level in a 360-degree circle.

For more DIY Shed building tips and information and the actual plans for the shed in this video, click the following links:

SHED PLANNING: https://www.askthebuilder.com/how-to-plan-a-shed

SHEDS for STORAGE: https://www.askthebuilder.com/storage-sheds

GARDEN SHEDS: https://www.askthebuilder.com/garden-sheds

SHED RAMPS: https://www.askthebuilder.com/shed-ramps/

ACTUAL SHED PLANS: http://go.askthebuilder.com/plans

Tim Carter talks about the correct tool to use - an optical builders level / transit - to get the wood 6 x 6 posts perfectly level.

It's very hard to get the concrete piers level when you're looking for a maximum margin of error of no more than 1/8 inch. It's easy to get the wood posts within that margin of error using the optical level.

For more DIY Shed building tips and information and the actual plans for the shed in this video, click the following links:

SHED PLANNING: https://www.askthebuilder.com/how-to-plan-a-shed

SHEDS for STORAGE: https://www.askthebuilder.com/storage-sheds

GARDEN SHEDS: https://www.askthebuilder.com/garden-sheds

SHED RAMPS: https://www.askthebuilder.com/shed-ramps/

ACTUAL SHED PLANS: http://go.askthebuilder.com/plans

Tim Carter shows how to install a concrete pier anchor bolt. It's important to get it in the right place because you often only have 1/4 inch margin of error.

For more DIY Shed building tips and information and the actual plans for the shed in this video, click the following links:

SHED PLANNING: https://www.askthebuilder.com/how-to-plan-a-shed

SHEDS for STORAGE: https://www.askthebuilder.com/storage-sheds

GARDEN SHEDS: https://www.askthebuilder.com/garden-sheds

SHED RAMPS: https://www.askthebuilder.com/shed-ramps/

ACTUAL SHED PLANS: http://go.askthebuilder.com/plans

Tim Carter shows how to use the handmade concrete chute to put concrete into the DIY shed pier form.

For more DIY Shed building tips and information and the actual plans for the shed in this video, click the following links:

SHED PLANNING: https://www.askthebuilder.com/how-to-plan-a-shed

SHEDS for STORAGE: https://www.askthebuilder.com/storage-sheds

GARDEN SHEDS: https://www.askthebuilder.com/garden-sheds

SHED RAMPS: https://www.askthebuilder.com/shed-ramps/

ACTUAL SHED PLANS: http://go.askthebuilder.com/plans