Gas Furnace Costs 2021 (Installation, Replacement, Pricing)

Are you looking for accurate cost information for a gas furnace?

If so, you're in the right spot. In this guide, you'll learn:

• How a gas furnace works: Master the ins and outs of how your gas furnace actually operates.
• The average cost of a gas furnace: Learn how much a gas furnace costs as well as how to tell when it needs to be repaired or replaced.
• Size and annual fuel utilization efficiency (AFUE) rating information: Learn what specifications your gas furnace must meet in order to work at optimum efficiency.
• How to maintain and save money on your gas furnace: Acquire the skills you need to get the most out of your gas furnace.

Whether you're a first-time owner or a homeowner trying to cut down on the heating costs associated with your gas furnace, this guide is for you. Keep reading to learn more about your gas furnace, how much it costs to operate, and how you can reduce those costs while still keeping your home warm and cozy.

How Does A Gas Furnace Work?

If you're a homeowner with a gas furnace, chances are you usually just turn it on and forget about it. But, do you know how it actually works? 

A furnace heats the air around it and then distributes that air throughout your home. 

The furnace kicks on when the thermostat in your home recognizes that heat is needed. At that point, the gas inside the furnace (which is typically propane or natural gas) ignites in the area known as the burner.

The flame that’s produced then heats up the heat exchanger, which is made of metal. Next, the heat exchanger moves the hot air throughout your cold home. 

As the exhaust is shunted out of the flue, the hot air (by a mechanism called the blower) fills the ducts inside your house, keeping you nice and warm, while pushing any remaining cold air back into — you guessed it, the furnace. That cold air gets heated up inside the furnace, and the process begins again.

Because your gas furnace consumes air, it's a smart — and safe — idea to add a fresh air supply vent to your home. Buy this product today and install your very own fresh air supply vent to keep your old or new furnace operating at its best.

Check out this video below for more information: 

What Is The Average Cost Of A Gas Furnace?

The upfront costs of gas furnaces vary widely, especially now that energy-efficient gas furnaces are becoming the norm. In general, depending on the model you want to install, you can expect to pay anywhere between $2,000 and $7,000 for a gas furnace. On average, many homeowners pay around $3,000 for a natural gas furnace.

However, there are additional costs to watch out for. If your ductwork needs to be repaired, there’s a problem with your gas line, or other installations are needed, you may be looking at anywhere from $1,000 to $6,000 in labor costs (i.e. for hiring a HVAC contractor).

Although the expense seems high, don't despair. Gas furnaces are much less expensive than oil furnaces. They also typically come with a good warranty, and their high energy efficiency ratings make them ideal for use over a long period.

Gas Furnace Replacement vs. Repair?

It can be difficult to determine when to repair or replace your gas furnace. However, there are some helpful measures to guide you in making an informed decision. 

First, if your gas furnace is more than 15 years old, it's probably worth replacing. Additionally, if you're noticing excessive dust in your home, humidity issues, rattling noises caused by faulty ductwork, or cold rooms, it's likely that your gas furnace needs to be replaced.

Still not sure if it's better to repair or replace? Try this trick: use the Energy Star Home Energy Yardstick to determine your home’s energy efficiency rating. Is your score less than five? You may be able to cut down on your furnace costs and improve your HVAC system by installing a new gas furnace.

What Size Gas Furnace Do You Need?

Ideally, the size of your gas furnace should be determined by its ability to heat your entire home. The heating capacity of a gas furnace is expressed as British thermal units per hour (Btu/h); residences are required to have furnaces with heating capacities of less than 225,000 Btu/h.

In general, a good HVAC professional should be able to help you find the right-size furnace for your home. 

A furnace that’s too big will heat up spaces too quickly, thus kicking on and off too frequently and increasing your energy costs. Meanwhile, a furnace that’s too small will run continuously, driving up your energy bills and damaging your heating system.

Finally, another consideration is determining what type of furnace to get. A single-stage furnace (which can only be turned on or off) may be perfect for heating a small house. However, larger homes may need a two-stage furnace (which can run in high- and low-power modes). All of these factors can influence the size of the gas furnace that’s optimal for your home.

What AFUE Rating Do You Need For A Gas Furnace?

The annual fuel utilization efficiency (AFUE) rating measures the efficiency of a central furnace. More specifically, an AFUE rating reflects the percentage of fuel that’s converted to heat by a furnace.

For example, a furnace with an AFUE rating of 90% reflects the fact that 90% of the energy inside a gas furnace will be converted to heat, while the remaining 10% will be lost elsewhere in the ductwork.

While oil furnaces must have an AFUE rating of 85% or more, gas furnaces must have higher AFUE ratings of 90% or 95%, depending on the state in which you live. 

Some furnaces available now have AFUE ratings of up to 98%. Although these gas furnaces may be more expensive, they can save you thousands of dollars in average heating costs over their lifetimes.

What Is The Average Cost Of A Gas Furnace By Brand?

Furnace prices vary widely due to factors such as the size of your house, the current condition of your ductwork, and installation costs. However, it's possible to get a sense of how much different brands of furnaces can cost. Read on to learn more about the average costs of different gas furnaces by brand.

American Standard Furnaces

American Standard Furnaces tend to range in price from $1,600 to $6,000, and they are known for their durability. Some of the high-efficiency models qualify for local rebates, which can lead to a lower total cost for consumers, and many of the furnaces boast a higher efficiency rating than required, with AFUE ratings of 97% or more.

Bryant Furnaces

Bryant Furnaces offer variable-speed gas furnaces (which use variable-speed blowers to more precisely control airflow). You can choose between single-stage and two-stage furnaces to help control your home's energy costs. In general, the average cost of a Bryant furnace is roughly $2,300, although rebates are available on many models.

Carrier Furnaces

If you're looking for a high-efficiency furnace, Carrier Furnaces offers deluxe models with up to 98.5% AFUE that range in price from $2,000 to $5,000. Although the upfront costs aren't cheap, the high efficiency rating can help reduce heating costs over time, thus making the brand a potentially cost-effective option.

Lennox Furnaces

If you're swapping out an old furnace for a new one, the pricing for a Lennox furnace typically ranges from $1,000 to $2,500. Add the cost of installers and your final price will be closer to $2,500 to $4,000. Since Lennox is closer in price to less expensive brands such as Amana and Goodman, it’s an ideal choice for keeping your replacement costs low.

Rheem Furnaces

Rheem Furnaces offer home-heating capabilities with a low square-foot commitment, making them ideal for homes of all sizes. Similar to its competitor Ruud, Rheem Furnaces generally range in price between $1,200 and $2,000, not including labor costs.

Trane Furnaces

Trane Furnaces offer standard gas and electric furnaces as well as varieties of the classic heat pump, which acts like an air conditioner in the summer and a heater in the winter. These gas furnaces range in cost from between $2,000 to $8,000.

How Can You Maintain Your Gas Furnace?

Maintaining your gas furnace is a great way to prolong its life and keep your home heated to your liking. 

Simple maintenance tests, such as checking the heat exchanger, cleaning the blower, removing soot that has built up in the furnace, and testing for carbon monoxide (which can potentially be lethal) are crucial for keeping your furnace working smoothly for years to come.

As much as you may want to, you can't do it all on your own. Occasionally, you should bring in a professional technician to assess the combustion efficiency of your furnace and ensure that the ductwork in your home is in good condition. 

Keep an eye on your furnace all year round and note anything that may be cause for concern. If your gas furnace is showing changes in its condition or becoming louder over time, it may be a problem that you need to identify with the help of a technician.

Finally, if your house is still cold with the heat on and you've been keeping up with maintenance requirements, you may have a furnace that's not properly sized for your home. 

Consider replacing your furnace or bringing in a HVAC contractor to help optimize your HVAC system. It's crucial to know when to repair or replace your furnace before it starts to drive up your heating bills.

How To Save Money On Your Gas Furnace

It's easy to save money on your gas furnace with some effort. First, to cut down on upfront costs, check for rebates. You can likely save up to hundreds of dollars on your gas furnace that you can use to help cover labor costs during the installation.

Second, try to save money during the coldest seasons: fall and winter. Turn your thermostat down while you sleep or are out of the house — this can save you up to 10% a year on your heating bills. 

Open your drapes to let in sunlight to warm your home, but seal your windows to prevent warm air from escaping and cold air from entering. Finally, keep your gas furnace in good condition. A well-maintained furnace can help you save money over time and keep your home warm without driving up your energy bills.

How Much Is A New Furnace (Costs, Installation, Replacement)

No matter who you are, where you live, or what type of house you own, at some point, you will have to address your heating and cooling needs. Unfortunately, many people do not realize that a furnace is a significant and costly investment. 

That is why if you are looking for accurate price information or additional details, you have come to the right place. In this guide, you will learn:

• All about new furnaces, including their average installation costs and the different types of furnaces you can choose from
• The additional expenses that you need to watch out for that can drive up the total cost of your furnace
• How large of a furnace do you need to purchase for your home, and what factors can affect this size
• How much does a furnace cost to replace, and how does the price change based on the type of furnace you want
• How to save money during this furnace shopping process and find the ideal furnace for your home

What Is The Average Cost To Install A New Furnace?

Typically, the average cost to install a new furnace will depend on the location of the furnace, the type of furnace you need, and the size of your home. That is why the average cost usually ranges from $2,000 to $8,000, with the national average for a full furnace installation being $6,000.

This full furnace installation includes the furnace cost, the labor fees, ductwork, and other installation costs and upgrades.

What Is The Average Cost Of A New Furnace Based On Type?

Even though gas-powered furnaces are the most popular type of furnace, other available options include electric furnaces and oil furnaces. 

Gas Furnace

Gas furnaces are often the most commonly found furnace unit in homes. With these furnaces, gas is piped into the municipal line, which causes the gas burner and the hot combustion gas to ignite, and as a result, the temperature of the air rises.

Natural gas furnaces often have the lowest yearly costs and are also the least harmful to the environment. However, the home needs a gas line in place to be able to purchase a gas furnace. For these reasons, they may not be an option in more rural areas.

Average Cost: New gas furnaces usually range in price from $650 to $3,000, with installation costs averaging about $6,000.

Oil Furnace

These oil furnaces are also known as pressure burners, with oil being sprayed into a combustion chamber at a high pressure, which is then ignited by an electric spark. As the oil mist is sprayed, the oil continues to burn, producing heat. 

Average Cost: Oil furnaces usually cost between $500 and $2,500, with installation costs averaging about $6,000.

Electric Furnace

Electric furnaces are the most efficient method of heating because they only use electricity. Even though they are easier to install than a gas furnace, they often result in higher energy bills. Also, with electric furnaces, it is incredibly vital to pick a furnace that best fits the size of your house. Otherwise, the unit will be either running too frequently, or it will always be turning on or off. 

Average Cost: Electric furnaces often range in price from $700 to $1,100, with most homeowners paying around $2,400 for installation. 

What Are The Additional Costs To Install A New Furnace?

Even though the type of furnace and size will often dictate your new furnace installation costs, there are additional factors that can affect the overall price. 

Labor Costs

Labor costs will usually range anywhere from $75 to $100 per hour depending on the area you are located in, the company doing the work, and the complexity of the installation job. However, these labor costs can also increase if assistant installers are present or an inspection of the furnace is required.

Ductwork

Duct system installation will often affect furnace installation costs. This is because if you do not have ducts installed, a new duct system will need to be designed for your home. 

Additionally, if your existing duct system is outdated, it may require air sealing to eliminate air loss and help your new heating system operate more efficiently.

Permits and Inspections

Generally, a permit is required for all types of furnaces, including electric furnaces, oil furnaces, and gas furnaces. There are two different ways inspections and permits can affect the overall furnace price:

• The cost of the actual permit, which averages between $75 and $200.
• The cost of updating certain equipment such as mechanical or electrical parts that no longer meet building codes. Due to these complexities involved with updating equipment, the price of installation costs can be significantly high.

During this inspection, the inspector will review the unit's overall installation and verify that it meets manufacturer and locality requirements. They will also review the electrical connections and conditions and make sure they are up to current codes. Finally, they will check out the plenum and duct connections to your home's existing ductwork and make sure they are efficient.

What Size Furnace Should You Get?

Even though furnaces can all appear similar when you first start looking for a system, in truth, each unit is very different, especially when it comes to capacity. That is why finding the right furnace size for your house is significant for overall energy efficiency and reducing energy costs. 

If you are considering furnace sizes, it is important to get a system that will provide you 40 to 45 BTUs of heat per square footage. That means if your home is 3,000 square feet, you will want a furnace that can provide between 120,000 BTUs and 135,000 BTUs. However, this sizing can also depend on whether you live in a cooler or warmer area. 

What Is The Average Cost To Replace A Furnace?

The average cost of replacing an old furnace is usually around $5,000. However, these costs can range anywhere from $2,000 to $9,000 and include the cost of materials, labor, and equipment. However, furnace replacement pricing usually depends on several factors, including the type of furnace you are replacing, the complexity of the work, and whether you need someone to get rid of your old furnace for you.

What Is The Average Cost To Replace A Furnace Based On Type?

It is essential to understand that when you are replacing a furnace, the type of furnace you want may not be the best furnace for your house. That is why it is essential to do your research before you decide on a replacement furnace and find one that works both for your needs and your replacement cost budget.

Gas Furnace

The average cost to replace a gas furnace usually varies between $2,000 and $9,000. However, the total cost will vary depending on the brand you want, how complicated the installation process is, and the overall efficiency of the replacement unit. 

For instance, if you decide to replace your gas furnace with a high-efficiency model, you can be looking at a price that is 50% to 100% higher than a standard model. However, these high-efficiency furnaces are often best for areas that have to endure brutal winters.

Common gas furnace brands include Goodman, American Standard, and Payne. 

Oil Furnace

Oil furnace replacement costs range anywhere from $5,000 to $8,000. Even though these furnaces have been around longer than electric furnaces and gas furnaces, due to the price of oil, they are relatively non-existent. They are typically only used where specific resources such as gas or electricity are not available. 

The more common oil furnace brands include Lennox, Armstrong, Rheem, and Ducane. 

Electric Furnace

A replacement electric furnace can run you upwards of $2,000 or more. Even though these furnaces are less popular than gas models, they are typically seen in areas where the winters are milder, in the form of geothermal systems or heat pumps.

While the electric furnace is considered a higher efficiency furnace, they are not as cost-effective as gas models since they use a lot of electricity to heat a home. 

How To Save Money On A New Furnace Or A Replacement?

Your furnace plays an essential role in your home, especially in the winter. However, because of the steep pricing involved, buying a new furnace or a replacement is considered a substantial investment that requires careful thought and significant research. 

Fortunately, there are actions you can take that can help you save money and ensure you are getting the right piece of equipment that works best for you and your home.

Consider the following tips:

• The best time to search for a new HVAC system is during the off-season (usually spring or fall time). This is usually when prices are the lowest. 
• Look for rebates from energy companies, HVAC companies, or government agencies that can help you get the best deal. 
• Obtain quotes from different service providers to compare offerings and ensure you are getting the most bang for your buck.
• Select models that are not only energy-efficient but that have a long lifespan as well. Not only will these models help you save money in the long run, but they can often provide you with incentives and rebates when you have a particular energy score.
• Consider zoning systems that allow you to divide your home into areas with separate thermostats. This way, you can set the perfect temperature based on how often your family uses the rooms. Automatic dampers installed into your ductwork will allow heat or air conditioning to flow through as needed.
• Be proactive and make sure you schedule proper furnace maintenance appointments. This is the best way to avoid costly emergency issues and prolong the life of your furnace. 
• Make sure you clean out your furnace filters. This can help improve your furnace's efficiency and lifespan. Check out this video for how to tell when it is time to change your furnace or AC air filter:

• Learn about AFUE or Annual Fuel Utilization Efficiency, which is a measure of how efficiently your furnace can utilize its fuel. The more efficient the furnace, the more heat it will give you per unit of fuel. Understanding this terminology and the AFUE rating system will be critical when buying a new furnace. 
• Choose Energy Star products, which means these products meet stricter energy efficiency guidelines set up by the U.S. Environmental Protection Agency. By choosing these certified products, you can optimize airflow, enhance comfort, and save energy and money in the process.

Heat Pump Costs 2021 (Installation, Replacement, Pricing)

Looking for accurate cost information for heat pumps?

Perfect, you're in the right spot. In this guide, you'll learn:

• What a heat pump is and the various types available
• How to find the right heat pump for your property
• The benefits of having a heat pump
• The cost and how you can save on a heat pump

Heat pumps can be an energy-efficient way to heat your home. Thanks to their innovative design, they can also act as an air conditioner. The cost of a heat pump varies, ranging from a single-room pump for around $2,000 to whole-home systems that can exceed $25,000. The cost will depend on the size of your home and the type of heat pump you buy. There are ways to reduce the cost of installing a heat pump in your home, so you can enjoy the benefits of energy-efficient temperature control year-round.

What Is A Heat Pump?

Heat pumps work differently from a traditional furnace by moving heat from one place to another. Because the heat pump is only moving the warm air around, it requires significantly less energy than other heating systems and central air conditioner units.

The pump uses the natural movement of heat, called thermal equilibrium, to warm and cool your home. Warm air naturally wants to move towards colder areas, and the heat pump helps the heat move more efficiently. Heat pump systems have an indoor and outdoor unit, both of which use refrigerants to capture heat in the surrounding air. The warm air is then transferred inside during the cooler months or outside during warmer months. This helps regulate the temperature inside all year long. You may choose to pair the heat pump with an air handler for even better temperature regulation.

Heat pumps have been in use since the 1940s, but it's only been in the last few decades that Americans have begun to embrace this alternative to a central air system. Homeowners are now embracing these new systems thanks in large part to their SEER rating, which is a measure of efficiency.

What Are The Different Types Of Heat Pumps?

Air Source Heat Pump

Air source heat pumps are 300% energy efficient, meaning for every 1kW of energy they consume they produce 3kW of heat. That's a big improvement over your standard furnace system, which achieves only about 80% energy efficiency. That's a big difference in the energy efficiency ratio. These systems use fans and compressors housed in indoor and outdoor units to move warm air through ductwork, to either raise or lower the temperature. That high efficiency translates into big cost savings, as you'll use significantly less energy to warm and cool your home. That means big energy savings, with some people seeing reductions of 50% or more in their energy costs.

Ductless Mini Split Heat Pump

Ductless mini-split heat pumps are ideal for homes or spaces that don't have existing ductwork. This could be an older home or even a garage. Ductless mini-split systems operate a lot like the air source heat pumps, in that they have an indoor and outdoor unit with a condenser and evaporator that uses a refrigerant to warm and cool the air. Instead of using ductwork, though, the necessary components such as power cords, refrigerant lines, and drains go through a single tube that links the two units. Ductless mini-split heat pumps should last about 10 years with the right maintenance.

Geothermal Heat Pump

Geothermal heat pumps use ground-source heat to warm and cool the home. While the temperature above ground will vary, the temperature a few feet below the surface of the earth stays relatively constant. Heat pumps can bring this consistent temperature into the home, by using the ground for warmth in the winter and as a place to put warm air in the summer. They are the most efficient heat pump option available, reducing the cost of regulating the temperature in your home by up to 50% compared to air source heat pumps. That makes them very inexpensive to run, but their initial cost can be quite high. 

What Factors Should You Consider Before Buying A Heat Pump?

Should you install a heat pump in your home? The answer to that will depend on where you live, the infrastructure of your home, and what energy resources you have available. Here are three things to keep in mind when you consider whether a heat pump is a right choice for your home.

Climate

If you are using a mini-split or air-source heat pump, then the energy efficiency of the unit will depend on the outside temperature. The heat pump is less efficient at lower temperatures. That's because it will need to work harder to collect heat from the outside air. Some heat pumps won't work at all when the temperatures reach freezing. Newer systems, however, will work down to 0 degrees Fahrenheit. That makes them suitable for cold climates. You'll get the maximum efficiency from a heat pump in temperate climates, though, where the outdoor temperature doesn't vary quite as much. 

Ductwork

If you don't have a duct system in your home, mini-split ductless heat pumps can be an ideal solution. They allow you to regulate the temperature of your home using electricity as opposed to hot-water heat, propane heat, or wood-burning fireplaces. That electricity can even come from renewable resources, giving you an eco-friendly way to regulate the temperature. You can avoid the expense of remodeling to create ductwork, too. If you already have a ducted system, you can still use a heat pump in your home. In colder climates, though, a baseboard heating system can be the more efficient option. 

Natural Gas Lines

If you have natural gas lines and already benefit from a furnace, then a dual-fuel system may be the answer. This option uses both a heat pump as well as a gas furnace. The heat pump works when temperatures are relatively mild, while the gas furnace kicks on when the heat pump is no longer the most energy-efficient option. It all happens automatically, too, so you don't have to worry about remembering to switch between the two depending on the weather. 

What Are The Benefits Of Having A Heat Pump?

• Lower monthly energy bills. You'll end up paying a lot less to heat and cool your home, which can offset the installation costs. Homeowners who install a heat pump can register a big drop of up to 50% on their monthly energy bills. You can compare their efficiency rating to see for yourself.
• They are very low maintenance. Like your home's HVAC systems, heat pumps should receive regular maintenance to make sure they are working as well as possible. With minimal upkeep, though, they should last for a decade or more. 
• Eco-friendly heating for your home. Columbia University reports that about 42% of New York City's total greenhouse gas emissions come from residential heating. Changing to heat pumps can significantly reduce those emissions and their impact on the environment. 
• Can help stabilize the humidity in your home. Because of the way heat pumps work, they don't end up drying out the air in your home as much in the winter. They can add moisture to the indoor air in the summer, too. 
• They both heat and cool your home. Instead of paying out for a system to heat your home and another one to cool it, a heat pump can do both. If you are replacing both a heating and air conditioning system, then installing a heat pump instead could be the less expensive option. 

What Size Heat Pump Do You Need?

Choosing the right size is key to getting a heat pump you'll love. A unit that is too small will struggle to regulate the temperature of your space. One that's too big will be a waste of energy, resources, and your money.

The best way to determine what size heat pump you need is to speak to a heat pump installation expert such as a local HVAC company. They'll use specific industry guidelines to determine which unit is right for you. They'll also take into account things like how many live in the home, your personal temperature preferences, and the insulation used in your house.

However, if you want a rough estimate for what size heat pump to buy, you can start by measuring your space. Then, for every 500 square feet, you'll want one ton of air conditioning capacity or 12,000 BTU. You'll find the system's BTUs listed in the specs from manufacturers such as Trane or Goodman. For example, if you have a 1500 square foot space, you'll want a heat pump that has a three-ton air conditioning capacity, or 36,000 BTUs. 

What Is The Average Cost To Install A Heat Pump?

The cost to have an HVAC professional install a heat pump will vary depending on many factors, including the size of your space, who does the installation, and the existing ductwork. Because of these variables, you'll see a range of prices for heat pumps and installation costs. Get quotes from several different installers so you can make sure you are getting the best deal. In general, though, you can expect the following costs on heat pump installation for your home: 

• Air source heat pumps: Between $3,000 and $5,000
• Ductless mini-split heat pumps: Anywhere from $1,200 for a single-room unit to $12,000 or more for a whole-home system
• Geothermal systems: At least $10,000 for a geothermal system, and up to as much as $50,000

Of course, these costs may be offset by the money you save on heating your home, as the operating costs can be significantly lower than with other heating systems. You can learn more about heating costs here: 

How To Save Money On Heat Pumps?

If you want to have a heat pump installed in your home but the upfront expense of the system is a concern, there are ways you can save money on a new heat pump. Put these tips into practice to bring the cost of a heat pump down and make it a more affordable option for your home: 

• Do the installation work yourself. If you are relatively handy and love a DIY project, you may be able to do the installation work yourself. This can save you thousands on installation costs and you'll only need to pay for the parts. 
• Shop around. Installation costs will vary widely even within the same town, so make sure you shop around with different HVAC companies. Companies that do a lot of heat pump installations are likely to be less expensive than a company that hasn't done very many of them. Get quotes from several local companies on their pricing and labor costs and see who offers you the best deal. 
• Make sure you buy a unit that's the right size. Buying a unit that's too small will end up costing you more to operate over the long term. Buying one that's too big will be a lot of unnecessary expense upfront. Talk to a professional to make sure you are getting a heat pump that's the right size.
• Maintain your heat pump regularly. Make sure the filters are clean and get a professional to service the system once a year. Good maintenance like this can extend the life of your heat pump and prevent you from paying out for a new one too soon. 
• Pair it with a programmable thermostat. A programmable thermostat will make sure the heat pump isn't working too hard when it doesn't need to. You'll be able to automatically raise and lower the temperature throughout the day to maximize the efficiency of the unit. 
• Look for rebates. There are several state and federal government programs available to help lower the cost of installing a heat pump. Check with your local government to see if they are offering rebates on heat pump installation. You should also see if there are any tax credits available from the Federal Government.

Heat pumps can be a great energy-saving way to heat and cool your home. Finding the right system at a great installation price can deliver inexpensive heating and cooling that's easier on the environment and your wallet.

Ductless Heat Pump Costs 2021 (Installation, Replacement, Pricing)

If you have a home without existing ductwork or a part of your home that’s colder or warmer than you’d like, a ductless heat pump may be an excellent solution for you. 

Sometimes referred to as a ductless air conditioner or ductless mini-split air conditioner, these resilient systems are some of the most energy-efficient, cost-effective options on the market. Read on to learn more about:

• What a ductless heat pump is and how it works to heat and cool your home
• How ductless HVAC can save you money
• How to decide if a ductless air conditioning system is right for you
• Proper sizes for ductless heat pump systems
• Ductless heat pump installation, components, and costs 
• Costs for ductless heating & cooling from popular brands
• Ways to save on ductless system installations

What Is a Ductless Heat Pump?

A heat pump is, at its most basic level, a system that moves heat from cooler areas to warmer areas. This keeps cool areas cooler and warm areas warmer. 

A ductless system, also called a mini split heat pump, is designed to work in an environment that lacks ductwork. 

Ductless mini split systems can be designed to make a single space comfortable or to operate in multiple zones, and usually include remote controls for easy temperature selection.

How Does Ductless Heating and Cooling Work?

The basic job of a heat pump is to move warm air into a space with colder air. For air conditioning purposes, warm indoor air is absorbed inside your home and transferred outdoors, resulting in cooler, more comfortable rooms. 

In the winter, this reverses. So, heat is absorbed from outside (yes, even when it's cold out) and brought into your home. 

A major cost savings with heat pumps is that instead of generating hot or cold air, which can require a tremendous amount of electricity, a heat pump shifts the warm air to where it's wanted. 

Without heating elements, heat pump electrical costs can be up to 50% lower than with traditional heating equipment like furnaces. Additional savings come from eliminating the need for ductwork, since up to 40% of your heat can be lost as it leaks from ducts. 

Is Ductless Heating Right for You?

Now that you've learned how wonderful and efficient a heat pump system can be, you may be wondering whether a ductless system is right for you.

Ductless Heat Pumps Work Best When:

• There's no existing ductwork.
• You want to improve your energy efficiency.
• The current central air and/or central heating systems, including ducted systems, can't circulate heat or cool air properly, such as to an addition at one end of a house or an upper floor bedroom. 
• Temperatures are above 25°F.
• Flexible installation is desired — ductless systems can be installed on ceilings, walls, or as floor-mounted units.
• Security is a concern — unlike a window unit, a ductless system requires only a small hole in the wall as a conduit to the outdoor unit.

Ductless Heat Pumps Can Struggle When:

• Temperatures drop below freezing — supplementary systems can be designed to help when heat pumps can't keep up.
• They are poorly installed or inadequately sized.
• Proper maintenance is ignored — while heat pumps require little maintenance overall, unit filters should be cleaned monthly to maintain peak performance and to prevent early system failure.

What Size Ductless Heat Pump Do You Need?

Size does matter — especially with heating and cooling systems. Undersized units will cycle on and off too frequently as they struggle to maintain the desired temperature, risking system failures. 

Check out the video below for a breakdown on heating and cooling system sizes:

Too-small units can also cause uncomfortable temperature fluctuations in your rooms and uneven humidity levels. An oversized system will cost you more in upfront expenses and in daily operations. This means you'll save little by installing such an otherwise energy-efficient heating and cooling system. 

Of course, you'll want to work with a professional HVAC contractor to choose a split unit system that's best suited for your environment, space, and preferences. Professionals use load calculations to determine the best system for your needs, taking into account such details as:

• Your home's size and layout — Do you have an open floor plan? Do you need to control the temperature in separate zones?
• Your local climate — How many days of heating and cooling do you need through the year? How extreme are the temperatures?
• Air Infiltration — Is your home well-sealed or is it an older, possibly drafty home?
• Windows and doors — How many are there and where are they located? For example, west-facing windows will heat a room much more quickly.
• Insulation — How well insulated is your home? 
• Appliances, people, and more — People and appliances generate heat and this adds up to a need for more cooling power.
• You — What are your preferences? Do members of your family prefer different temperatures? Do you like it really warm in the winter or only on the coldest days? Do you want to cool the whole house or specific areas such as bedrooms or a home office? 

A rule of thumb is that every 500-600 square feet of living area (that you want to heat or cool) requires one ton of heating/air conditioning capacity and each ton requires about 12,000 BTU (British Thermal Units, used to measure the power of most heating and cooling systems). 

Based on the average new U.S. home, at about 2,500 square feet, you'll need a 5-ton system. 

What Is the Average Cost to Install a Ductless Heat Pump?

Depending on the system and site specifics, ductless heat pump installation (labor) costs can run anywhere from $300 for the simplest, single-zone setup, to rather extensive, multi-zone systems at around $3,000.

However, the average is about $600 for most home installations. Depending on your installation needs, additional professionals may be needed such as a carpenter or electrician. 

What Is the Average Cost of Heat Pump Split Systems?

Ductless heat pumps cost, on average, $1,500 to $2,000 per ton of capacity to cool, depending primarily on brand and efficiency. Given what we've just covered about the average, a newer home may need a 5-ton system.

This means average heat pump costs ranging from $7,500 to $10,000. As with many home improvements, a more efficient option that will save you money down the road will almost always cost a little more upfront. 

While these average costs apply to whole systems, pricing individual components can give you a better picture of what you’ll need to pay.

Outdoor Condenser

The outdoor condenser is the workhorse of your ductless AC system and is the main contributor to its cost. You’ll need to pay between $1,500 to $2,500 for one.

Evaporative Wall Mount

The most common type of ductless system, wall-mounted evaporative units generally cost $300 to $1,000 and are most suitable for rooms with at least seven-foot ceilings.

Evaporative Ceiling Mount

Ceiling mounted evaporator units which can be less intrusive range from a low average of $700 to a high of $1,800. 

Indoor Ceiling Cassette

Recessed ceiling cassettes allow only the vent surface to be displayed on the ceiling. They can send heated or cooled air in four directions at once and offer more power than wall-mounted units. These cassettes cost anywhere from $500 to $1,700. 

Installation Kit

Containing line sets, wiring, hoses, fittings, and connectors needed to install a ductless heat pump system, installation kits usually make up $300 to $500 of total costs.

Refrigerant Lines

These lines, which run between the outdoor condenser unit and the indoor air handlers, vary widely in cost, depending on the specifics of your installation. However, they average about $5 per foot.

What Are the Average Costs of Heating and Cooling Systems By Brand?

As you may expect, prices for ductless systems vary even among top brands. Each of these companies offer high-quality, ductless heat pump systems with a variety of capacities, efficiency levels, and options. 

Choosing the most efficient system you can afford is well worth the upfront costs, which you can recoup in utility savings. We also recommend selecting a brand with local technicians available for installation and maintenance. 

Mitsubishi

Among the more efficient systems, Mitsubishi kits cost from about $1,500 to $12,500. 

Daikin

Perhaps a less familiar name in North America, Daikin's kits can be had for around $1,000 to $8,600, with the reduced cost reflected in the lower efficiency ratings. 

LG

LG offers systems ranging from small, inexpensive units with average efficiency at $850 to setups with excellent efficiency for prices up to about $7,300. 

Fujitsu

With ductless systems from about $1,200 to $9,300, Fujitsu's kits offer mid-range efficiency.

Trane

Trane's decades of experience are shown in its full range of ductless systems with prices generally from $4,000 to $14,000. Though the brand tends to have higher prices than its competitors, Trane’s solid reliability and superior efficiency can make up for those costs.

Toshiba/Carrier

With an HVAC history as long as any in the business, Toshiba/Carrier offers high efficiency ductless systems from around $2,000 for the least expensive model to $10,500 for high-end, multi-zone systems. 

What Are the Additional Costs for Installing Ductless Heating Systems?

The cost of a ductless heat pump system will generally be based on its efficiency rating, its compatibility to the size and shape of your home, and your environment. Additional details that can affect installation costs include:

• Zones — A single zone system will require less equipment and labor than a multiple zone system
• Location — More complicated installations, both for the outdoor compressor unit and the indoor units, will tend to require additional labor and materials. The expense increases with additional setups like ceiling cassette units, longer refrigerant lines, conduits, and wiring to upper floors or more distant outdoor units.

How to Save on Ductless Heat Pumps?

Every homeowner wants to save a little money, especially when investing in a large home improvement project such as an HVAC system. 

Less efficient ductless units will be less expensive upfront, but you'll see reduced energy savings (perhaps only 15-20% lower than your current costs) in the long run.

Meanwhile, more expensive (and efficient) systems can provide ongoing, future savings up to 40%. Some national, state, and local programs offer rebates and tax incentives for installing more efficient units, such as those which have earned Energy Star ratings. 

If you're considering a DIY job, note that while you can self-install a few systems which come pre-charged with refrigerant, most require it to be added after the fact. This means that professional HVAC help will be needed to charge your unit. 

Self-installation will also almost always void your manufacturer's warranty, leaving you in the lurch if you encounter problems. Your best bet is to hire professional installers to ensure that your system is properly sized and safely installed.

 

Geothermal Heat Pump Costs 2021 (Installation, Replacement, Pricing)

Geothermal heat pumps began to grow in popularity in the mid 20th century. And while geothermal renewable energy can dramatically save you money on your home's heating and cooling costs, there has always been one major factor keeping homeowners from installing a geothermal heat pump: the initial sticker price.

A geothermal heat pump can easily cost double of what a conventional heating and cooling system costs. But there are many factors that can influence your final installation price, as well as cost-saving benefits after your new heat pump is up and running. 

If you're looking for the most accurate cost information for geothermal heating and heat pump installation, this heat pump estimation guide will help you to learn:

• The average cost of a geothermal heat pump system
• The average cost of a ground source heat pump
• The different configurations of a geothermal system (and how that affects pricing)
• The environmental and legal factors that contribute to the high cost of geothermal systems, such as your local regulations and your local soil composition and soil conditions
• The significant benefits of going with a geothermal system
• And most importantly, ways you can save money on geothermal heat pump systems

Let's dive in!

What Is A Geothermal Heat Pump? 

Before we begin, let's quickly break down the technical terminology. 

When people talk about geothermal energy and how it can help with heating and cooling your home, they're often referring to two distinct technologies:

• Geothermal heat pumps
• Ground source heat pumps

The two types of heat pumps are similar, but there are a few important things to know, plus key differences to keep in mind:

• Both types of heat pumps draw energy from the ground, in contrast with conventional heat pumps that focus on cooling or heating the air (known as air-source heat pumps).
• Geothermal heating utilizes heat from the core of the earth (similar to how natural hot springs are naturally heated deep below the earth's crust).
• Ground source heat pumps harness the energy stored in the shallow ground that's been heated from the sun's rays. 

What Is The Average Cost Of A Geothermal Heat Pump System?

We'll talk about the average cost of a ground source heat pump further down in this geothermal pricing guide. But first, let's dig into the average costs of geothermal heating.

According to the U.S. Department of Energy, the typical geothermal heat pump system will cost you approximately $2,500 per ton of capacity. 

All heat pumps use a BTU per hour (BTU/h) measurement to indicate their heating abilities (not to be confused with air conditioners, which use EER). A single ton equals 1,200 BTU/h, and you need one ton of capacity for every 500 square feet of your home. 

This means you're looking at:

• A 3-ton heat pump for a 1,500-square-foot home
• A 4-ton heat pump for a 2,000-square-foot home
• A 5-ton heat pump for a 2,500-square-foot home

Thus, you can expect the average geothermal heat pump system to cost approximately $10,000 for your typical 2,000-square-foot house. 

Keep in mind that the geothermal heat pump system is just one element of your total budget! 

You will also need to pay for ground excavation and installation (including labor, taxes, etc.), which can easily drive the total project cost to $30,000 or more for a 2,000-square-foot home.

What Is The Average Cost Of A Ground Source Heat Pump?

In general, you can expect to pay twice as much as a traditional heat pump, reports North Dakota State University, which notes that a ground source heat pump is essentially the same price as a geothermal heat pump.

Expect to pay around $7,000 to $10,000 for a ground source heat pump that can handle a home that's 1,500 to 2,000 square feet. 

It's the total cost of installation where you may see a bit of a savings. That's because ground source heat pumps don't require as much excavation and digging. Since the system is based on a more shallow installation, you may find it a little bit cheaper than the total cost of a traditional geothermal heat pump system.

Depending on factors like your soil composition, total ground source heat pump costs will be in the mid-$20,000s. 

What Are The Geothermal System Configuration Costs?

All geothermal and ground source heat pumps use a ground loop, which are buried pipes filled with fluid (often an antifreeze solution or refrigerant). The fluid heats up as it flows underground, and the system then carries that heat into your home.

The U.S. Department of Energy explains that there are four main configuration types for your future geothermal heat pump: 

• Open-loop systems 
• Horizontal closed-loop systems 
• Vertical closed-loop systems
• Pond/lake closed-loop systems

Installation of these loop systems can add a significant amount to your total geothermal system installation costs. 

Closed vs. Open Loop

Open loop systems are not very common, and may be illegal in many regions. With an open loop system, your geothermal or ground source heat pump pulls fresh water in from a well. The water circulates through the system, then it gets released into another well.  

Local regulations may ban or severely restrict your use of open loop systems because of the potential environmental risks to springs, lakes and rivers in your community. 

Closed-loop systems are the most common configuration. As its name suggests, the heat pump's fluids remain circulating endlessly within a closed piping system.

Horizontal Looping

The U.S. Department of Energy points out that using a horizontal loop is the "most cost-effective for residential installations." That's because your geothermal system's piping is buried horizontally in shallow ground (approximately four feet deep).

Average costs per square foot, according to a report led by the California Geothermal Energy Collaborative, fluctuate widely depending on where in the U.S. you're located:

• Midwest: $12.12 per foot of horizontal piping (an average of $18,533 per installation)
• Northeast: $2.33 per foot of horizontal piping (an average of $3,073 per installation)
• South: $9.24 per foot of horizontal piping (an average of $12,102 per installation)
• West: $11.38 per foot of horizontal piping (an average of $11,910 per installation)

Vertical Looping

Vertical piping is installed when you either don't have enough land to do a horizontal installation, or if you want to minimize how much surface area your geothermal installation requires. 

Because you're digging vertically into the ground, you avoid disturbing as much of the landscape. However, a vertical loop configuration is also more expensive to do.

Average costs per square foot are also dependent on where in the country you're in:

• Midwest: $12.99 per foot of horizontal piping (an average of $19,857 per installation)
• Northeast: $16.03 per foot of horizontal piping (an average of $21,162 per installation)
• South: $14.94 per foot of horizontal piping (an average of $19,575 per installation)
• West: $14.64 per foot of horizontal piping (an average of $15,333 per installation)

Pond Ground Looping

Pond/lake loop installations are the cheapest, notes the U.S. Department of Energy, with one caveat: You obviously need a pond or lake on your property. The geothermal system's piping runs underground to coils deep in the lake or pond.

Average costs per square foot ring in at around $2.30 for an average installation cost of the low to high $3,000s.

What Factors Contribute To The Cost Of Installing A Geothermal Heat Pump?

As you could see in the previous section of this guide, geothermal heating costs involve far more than the sticker price of the pump itself. During the excavation and installation process, other factors can impact the final cost of your overall installation. 

Climate

According to the University of California-Davis, climate plays a big role in how your geothermal system is installed, and thus the total cost of installation:

• Colder climates require changes to the fluids used in the underground piping, such as the addition of extra chemicals to prevent freezing. This can make installation more expensive.
• Very cold areas may require pipes to be buried deeper than normal, which drives up excavation and labor costs (as well as requiring more piping material)
• Areas with poor sun exposure may require extra piping when installing a ground source heat pump system.

Soil Composition

UC Davis points out that soil composition can contribute to geothermal heat pump installation costs in several ways:

• Very rocky or compacted soil requires more labor and work to excavate.
• Some types of rocks and soil conduct heat differently than others (also known as thermal diffusivity and conductivity). This may affect your underground pipe configuration or the amount of pipe you need to bury to generate the heat transfer you require. 

Local Regulations

State and municipal rules dictate the types of permits, licensing and testing you need to do in order to start your geothermal project. This can add a few hundred dollars to your total costs. 

Open Loop Regulations

If you choose to go with an open loop configuration, you're looking at added regulations, permits, and fees. Depending on your region, you may even need to do various assessments, such as environmental impact studies, to ensure your geothermal project doesn't negatively impact the land and water around you. 

Square Footage

It's quite simple: the larger the space that you need to heat (i.e. the bigger your home), the bigger your geothermal system needs to be. 

Heat Pump Maintenance 

A report by the University of Tennessee found that geothermal heat pump maintenance and repair tends to be cheaper than maintaining and repairing a traditional heating and air conditioning system. 

However, the maintenance costs are not exactly negligible. Regular maintenance inspections by an HVAC contractor can run you $150 to $300 a visit (depending on your system and your region), and repairing air compressors and similar parts can easily extend into the thousands. 

What Are The Benefits Of Geothermal Heating and Cooling Systems?

Despite the high cost of installing a geothermal heating system, the benefits are numerous. 

Check out this video below for a breakdown on heating costs: 

Here is a breakdown of the benefits: 

• It's far more energy-efficient and uses less energy: The U.S. Department of Energy estimates that a geothermal heat pump can be up to 600% more effective than conventional systems, representing significant savings on your utility bills.
• It requires low to no maintenance: Another report from the U.S Department of Energy notes that geothermal systems are naturally protected from damage (since they're buried deep underground) and have far fewer moving parts than traditional heating and cooling systems/HVAC systems. Not only does this save on maintenance costs, but that also results in extended longevity (many geothermal systems last 25 years or longer).
• It's better for your community and the greater world: Geothermal systems create numerous local jobs, especially because most systems are designed and built in the U.S. Using geothermal energy also reduces your impact on your local electricity grid and reduces your contributions to global carbon emissions and pollution.

How To Save Money On Geothermal Heat Pump Systems?

Despite its initially high installation costs, a geothermal heat pump system can pay for itself in just a couple of years thanks to its significant energy savings.

If you want to speed up how quickly you recoup your out-of-pocket upfront cost and expenses, there are additional ways to save money on your geothermal heat pump system.

1. Buy the Right Size

A pump that's too small for your home is inefficient, and a pump that's too big is a waste of money. Work with your HVAC contractor to ensure your system is configured for your home's size.

For even more savings on energy costs, look for heat pumps that carry an Energy Star certification.

2. Apply For Incentives 

State and federal government agencies offer numerous grants, rebates and tax credit. When applicable, these federal and state incentives can slash your initial cost by a significant amount.  

3. Think Beyond the Heat Pump

The less heat you need, the smaller the heat pump you need. While you can't shrink your current home, you can look at ways to improve your home's heating and energy efficiency (e.g., upgrading the installation, blocking drafts at your entryways, using the right ductwork, etc.) in order to avoid buying a bigger heating system.

4. Get Quotes

Geothermal heat pump installation is a complex task that's far beyond the range of even a skilled do-it-yourself homeowner. Always go with a licensed professional. 

When seeking professional installation services, solicit multiple quotes to get a better idea of the range of prices in your area. Many installers have relationships with different subcontractors for labor like excavation, and their own contracts and deals can lead to cost savings passed down to you.

How To Clean Your Gutters (Cost Estimates)

Gutter cleaning is an essential task as a homeowner. Having gutters cleaned on schedule can not only help improve the overall look of your home, but it can help prevent issues with your roof in general. 

However, many times homeowners have no idea what proper gutter cleaning entails or what costs are associated with this work.

That is why if you are looking for accurate cost information related to gutter cleaning, look no further. In this guide, we will help you:

• Understand the signs that indicate you need to get your gutters cleaned
• Figure out how often you need to clean your gutters
• Understand whether you need to hire a pro to get your gutters cleaned and the costs involved 
• Figure out what factors influence the total price of your gutter cleaning
• Understand the benefits of getting your gutters cleaned
• Figure out how to save money while ensuring your gutters are well maintained 

What Are The Signs You Should Have Your Gutters Cleaned?

When a homeowner neglects their rain gutters, they quickly find this leads to water buildup and a host of other issues. Typically, the most common signs that gutters need to be cleaned include:

• Water Overflowing: The whole point of your gutter system is for rainwater to drain from the roof and make sure it funnels away from the house. If you start noticing that the rainwater is overflowing from the gutters, it means that they are clogged and need a thorough cleaning. 
• Stains: When you notice that there are stains on the siding of your house, it means your gutters are clogged, and the buildup is overflowing when it rains. Consequently, this debris is spilling on your home's siding, causing it to stain. 
• Pools of Water: If you start seeing standing water outside of your house or near your home's foundation, it can mean that your gutter system is clogged or damaged. Worse yet, is if you do not take care of this issue fast, this pooling water can damage your home's foundation. 
• Sagging Gutters: Clogged gutters are one of the most common problems a homeowner will experience. However, it is important to understand that gutters are not built to hold the extra weight. As a result, when gutters are not cleaned, they will start being weighed down by debris, soggy leaves, and water buildup—leading to sagging gutters. 
• Animals Near The Gutters: Sure, it is common to see small critters such as bugs running along your gutters or residing in them. But if you start noticing larger animals such as rodents, mice, or squirrels making a home in these gutters, it can mean real problems. These packed leaves which clog your gutters create the perfect nesting ground for these animals, and if you start seeing these larger critters, it is a sure sign that your gutters need to be cleaned. 
• Plants Growing: When there is enough dirt in your gutter, it can become an ideal home for seeds, which means that soon you will have a garden growing in your gutters. This can lead to extensive problems and issues for your home. Before these plants start sprouting, you must remove this dirt accumulation and keep your gutters clean. 
• Birds Flocking: It is not just the squirrels you need to watch out for. If you see birds flocking to your gutter, it usually means that there is enough debris in there to provide these birds with the perfect nesting materials.

When you start noticing any of these signs, it is time to get to work and get your gutters cleaned promptly. Waiting too long to complete this job can leave you dealing with more than just a clogged gutter. You can be left with costly and extensive water damage and foundation problems. 

How Often Do You Need To Clean Your Gutters?

Typically, you will want to clean your gutters at least twice a year. Once in the late spring and once in the late summer or early fall. 

However, depending on the plants or trees you have near your home, you may want to clean these gutters more frequently, such as every three months. For instance, if you have pine trees by your house. You may want to inspect your gutters more often. This is because pine trees will shed their needles all year long and can quickly clog up your gutters.

What Are The Factors That Impact How Often To Clean Gutters?

It is not only pine needles that can impact the frequency of how often you have to clean your gutters. It is also essential to factor in your surroundings and the climate of your residence.

Surroundings

You need to examine the surroundings around your gutter to figure out how often you need to clean them. We have already discussed why pine needles can cause problems, but large trees can also result in gutter issues. If you see leaves dangling directly over your gutter, it is important to clean your gutters frequently. This is because large trees can trap moisture when the leaves begin to cluster, resulting in many clogs. 

Weather and Seasons

You will also want to have your gutters cleaned throughout the winter. This can help prevent any roofing problems or damage to your home's fascia. That is why directly after an ice storm or snowstorm, make sure you check your gutters and remove any debris.

What Are The Benefits Of Cleaning Your Gutters? 

Your gutters have an extremely important job when it comes to maintaining your property. They guide water away from your porous home and help shield your home from costly water damage. That is why there are so many benefits of cleaning your gutters. 

Consider the following:

• Clean gutters prevent the destruction of expensive landscaping.
• Clean gutters extend the lifespan of your roof.
• Clean gutters improve the safety, comfort, and health of your home.
• Clean gutters eliminate nesting areas for pests or rodents.
• Clean gutters increase your gutters' lifespan, helping you avoid the cost of expensive new gutter installation.
• Clean gutters help increase the value of your home.
• Clean gutters can help prevent structural damage to your home's sides.
• Clean gutters can help prevent water from overflowing and causing foundation problems. 
• Clean gutters can stop water from pooling around your walkways and driveways, which can pose a danger to individuals walking on these surfaces.

Should You Hire A Contractor To Clean Your Gutters?

One of the most common questions many homeowners have is if they need to hire a gutter cleaning company to take care of their gutter issues or can it be a DIY project. Typically, if you are looking for comprehensive gutter care and maintenance, gutter cleaners can provide you with precisely that. These contractors can help with any gutter repairs you need, ensure your gutters and downspouts are cleaned out thoroughly and make sure there are no significant problems with your gutter system. However, if they do find any issues, they can quickly get to work taking care of any replacements, caulking, and slope adjustments.

If you are still torn about whether or not you need to hire a contractor, consider the following benefits:

• Save Time: Quite often, homeowners do not have the time to complete a comprehensive gutter clean-up. However, with a contractor's help, you will not have to worry about dedicating a whole day to this project.
• Handle Repairs: What will happen if you clean out your gutter and realize that your gutter is broken. Very few homeowners know how to fix this problem or how to get it done fast. Fortunately, professionals can help take care of these repairs quickly before they become a more significant issue.
• Prevent Accidents: Gutter cleaning may sound simple enough, but when someone inexperienced attempts to do the job themselves. Serious accidents can result, such as falling off a ladder or the roof.

What Is The Average Cost To Clean Your Gutters?

The pricing for getting your gutters cleaned averages between $118 and $224. Many times, single-story homes cost anywhere from $70 to $200, and two-story homes range from $90 to $225, depending on what work needs to be done. If you have a three-story house, the cost of cleaning will usually cost you an additional $75 to $200 per service that needs to be completed. 

Traditionally, professional gutter cleaning will follow a per linear foot pricing model, which means that most homeowners will pay around $188 to clean a single-story 1,500-square-foot home with 150 linear feet of gutters.

To breakdown these costs further:

• The National Average Cost: $188
• The Average Rate of Gutter Cleaning: $150-$225
• The Minimum Cost: $70
• The Maximum Cost: $450 plus

Some other factors that can also impact gutter cleaning costs include the home's height, location, and the gutter's condition.

How To Save Money On Gutter Cleaning?

Even though gutter cleaning should be at the top of your home maintenance list, if you have not budgeted for cleaning, you may think there is no way you can get your gutters taken care of. However, with the below ideas, not only can you save money, but you can make sure the gutter cleaning job is done right. 

• DIY: The most common way to clean your gutters and save money is to do the job yourself. However, you need to keep in mind that this cleaning process can take a significant amount of extra time and be a rather dirty project. Consider doing some research before you start cleaning, or watch the following video to ensure you do the job properly:

• Look for Promotions or Deals: Many times, gutter cleaning companies offer their gutter cleaning services at a reduced price. If you cannot find any promotions online, you can always try calling these contractors and find out if they will be running any specials for you to take advantage of. 
• Chat With Your Neighbors: Sometimes, gutter companies can offer promotions if a neighbor had their gutters cleaned recently. They may also provide reduced gutter cleaning prices for neighborhoods that decide to clean their gutters simultaneously.

Check Other Service Providers: Another great place to check for gutter cleaning services at a reduced price is through other service providers. For instance, your roofing company may offer a discounted gutter cleaning service as part of your annual roof inspection or when completing any roof repair. Also, consider checking with landscaping companies or window cleaners who may combine services and help you reduce costs.