Vinyl Siding Trim – Use Different Colors

flat white trim vinyl siding

Vinyl Siding Trim | The flat white trim next to the window has a pre-cut groove in it that laps over the vinyl siding. Did you know you can paint vinyl siding? (C) Copyright 2021 Tim Carter

Vinyl Siding Trim - The Devil is in the Detail

  • Wide variety of trim types and styles
  • Door surrounds are remarkable
  • Lots of attic ventilation louvers
  • Spend hours looking at online house photos

QUESTION #1: The house I grew up in had vinyl siding and the trim around the windows was some thin distasteful vinyl that had an end profile like the letter J. I thought it looked abominable. How can you make the vinyl siding look more like a traditional home that has wider trim pieces? What else can be done to make the vinyl siding look more attractive? Beverly T., Ft. Wayne, IN

Can I Mix Colors of Siding and Trim?

Yes, you can and should use different colors of vinyl siding and trim. The look can be stunning, even if it's just white trim with a different color siding.

Holy tomato! It’s impossible to list all the vinyl siding accessories and options you have available to you. For starters, don’t think that you have to use just one color and one siding style on your home. Quite a few homes I see are incorporating white trim with two complementary colors and siding profiles.

How Can I Get Inspired and Select the Right Colors?

If you want real inspiration, go online and look at photos of the paint schemes of some of the grand Victorian Ladies. Some houses incorporate three, or more, colors. I had horizontal lap siding at the last Queen Anne Victorian home I built for my family, but up in the gables I used traditional cedar shakes as was found on many homes built in the late 1800s.

CLICK or TAP HERE to get FREE BIDS from local contractors who can install vinyl siding.

Can You Mix Different Textures of Siding?

You can achieve this same look with vinyl siding and the vinyl shakes can be a different color! But it gets even better. J-channel is still available, but the better choice would be a flat trim board that surrounds windows and doors. These flat boards come with a rabbited edge that creates a hidden recess for the siding to slide behind. It works the same way the older J-channel works but it’s so much better looking.

Is Flat Window and Door Trim Available in Different Widths?

The flat trim boards come in various widths. The wider boards work better at the outside corners of the house as it’s important to maintain scale when trimming out a house. The narrow trim boards used around windows and doors would look like pinstripes at the corners.

Are Vinyl or Urethane Door Surrounds a Good Idea?

Don’t forget to look at the striking door surrounds that will really make your doors the focal point of the front and rear of your home. Some are simply breath-taking. You can now get gorgeous mounting blocks for exterior lights and electrical outlets that also have built-in channels on the edges. These really dress up the look of a vinyl-sided home.

Do Attic Vents Come in Different Colors?

Attic ventilation comes into play here too. Older homes always had square, rectangular, or triangular louver attic vents in the gable end. Those same vents are all available for vinyl siding and once again, don’t be afraid to make them a complementary color. Color experts might agree that these should match the trim color around windows and doors. Study the vinyl siding brochures and you’ll see what I mean about using a different color.

round green attic vent

Here's a forest green attic vent. You can get all sorts of shapes and colors. CLICK or TAP HERE to see for yourself.

Where Can I get Vinyl Siding Color Ideas?

I would spend lots of time looking at the photo galleries at all the vinyl siding manufacturers’ websites. When you see a particular photo that puts your head on a swivel, study it and take notes as to exactly what you like about the photo. There’s no need to hope your new siding will look great. You can guarantee it by just finding a look you know looks superb.

Column 1316 A

August 26, 2019 AsktheBuilder Newsletter

I know, I just landed in your Inbox yesterday.

But REMEMBER what I said?

The NEVER-BEFORE 20% OFF the Stain Solver sample size ENDS in about 8 hours.

I can just about GUARANTEE you'll NEVER see the price this low again.

STain Solver Sample Size

What you see above are little guys, that's what we call them here in the office, already in the white boxes and the others are ready to pack for you.

Are you one that says, "BAH, Tim! Your Stain Solver doesn't interest me!"

Well, you're really missing out. Stain Solver is made in the USA with USA ingredients, it's certified organic and it WORKS!

Kathy and I started the company in 1996.

Over the past 24 hours if I told you how many 50-pound BUCKETS of Stain Solver we've sold to RETURNING customers, you'd be BLOWN AWAY!

Think about that.

Why would someone buy 50 pounds?

Simple. They might have bought a sample size, discovered how WELL IT WORKS, and then wanted the best price per pound.

Period.

CLICK or TAP HERE to place your order NOW!

Regular Newsletter on Wednesday

Look for another email from me on Wednesday. I'm going to share a consult call I had this morning with Donna. You may have the same problem she does!

Tim Carter
Founder - www.AsktheBuilder.com
Maker of Little Guys! - www.StainSolver.com
Crear of Brass Dust - www.W3ATB.com

Do It Right, Not Over!

August 25, 2019 AsktheBuilder Newsletter

You could be a new subscriber. Listen, this issue is NOT A NORMAL newsletter. Every now and then I have a sale on an incredible product my wife and I make. Today is one of those days. You'll see a normal newsletter next time.

Subscribers of Record: If you're not yet a fan of the magic Stain Solver, this may be the day you become a customer for life. Look at my Stain Solver Challenge below.

Stain Solver Oxygen Bleach

Stain Solver

Certified Organic Multi-Purpose Cleaner

You've heard me talk about Stain Solver for years possibly. But you've might have ignored what I have to say.

Not too awful long ago I got a message from a subscriber that said, "You say such incredible things about the product that I feel it's TOO GOOD TO BE TRUE. No cleaner could do all you say."

Well, Stain Solver is that great. I know there are folks out there that have been burned by outlandish claims. I don't make those about Stain Solver.

CLICK or TAP HERE to watch a bunch of short videos showing me using Stain Solver to clean stuff.

Stain Solver is owned by Kathy and me. It cleans HUNDREDS of things both inside and outside your home.

It's a non-toxic oxygen bleach.

Here's what others have to say about this amazing made-in-the-USA product:

“Love Love Love your Stain Solver!!!!!!!!!!!!!!" Connie S.

“Ordering was quick and easy - looking forward to using Stain Solver." James B.

“Love your product. Used on white exterior that had mold. Perfect product for the job.” James V.

“Great product and great customer service. Thank you!” Steve M.

“I've been a fan of Stain Solver for years now, this is my third order. I have a solution of it working on my outdoor water fountain right now, it always does a fantastic job. Thanks for this great cleaner Tim," Karen M.

“I’ve been using Stain Solver on a white tile floor which 'usta' have white grout. It's white again. Stain Solver always works!" Patricia W.

“Love love love your support!" Alma S.

“I love how Tim’s eyes match that shirt!" Mary P.

“Always fabulous customer service and a marvelous product!" Robbin D.

RARE Labor Day Stain Solver SALE

Stain Solver is on sale right now. CLICK or TAP HERE to place your order. You do NOT NEED a promo code. We've already LOWERED the price in the cart. You'll see the normal price by the SALE price.

The larger size you order - the GREATER the discount.

Here's what the discounts are for this sale:

Small Sample Size - 20% OFF - The price may NEVER be this low ever again. Here are the other sizes:

  • 2.2-pound size - 8% off
  • 4.5-pound size - 9% off
  • 9.2-pound size - 10% off
  • 50-pound bucket - 11% off

The SALE price for the SAMPLE SIZE is only good for the next 48 hours. You can get an even LOWER price per bottle if you order a CASE of them.

The sale price for the other sizes will last one week. All the prices go BACK UP on Monday morning September 2nd, 2019.

Stain Solver New Customer Challenge

If you've NEVER purchased Stain Solver before I'm going to make you an offer you can't refuse.

Purchase some, even if it's just one of the small sample sizes.

When you get it if you have ANY QUESTIONS about how to use it, I'll call you on the phone. Yes, me the CEO of Stain Solver will call you.

I want to TRANSFORM you into a customer for life, so I'm happy to invest the time. I KNOW Stain Solver works. Tens of THOUSANDS of others like you know it works because they keep buying it.

When was the last time the CEO of a company called you? Yeah, I thought so.

CLICK or TAP HERE now to order.

That's quite enough for a Sunday.

Tim Carter

Founder - www.AsktheBuilder.com
Co-Founder - www.StainSolver.com
Brass Pounder - www.W3ATB.com

P.S. I promised I'd share the video of the wacky radio antenna. CLICK or TAP HERE to see it.

August 23, 2019 AsktheBuilder Newsletter

Are you a new subscriber? Let me tell you now, an alert like this one is rarer than one of those upside down biplane postage stamps.

All the seasoned subscribers will swear to it.

Stupendous Sunday Stain Solver Sale

All I'm going to tell you now is we've NEVER EVER before - in 20+ years - had a sale like we're going to have on Sunday.

Stain Solver Oxygen Bleach

Stain Solver is MADE in the USA with USA ingredients that are food-grade quality. 

CLICK or TAP HERE to get a feel of what Stain Solver is and what it can do. My wife Kathy and I own the Stain Solver business.

If you've been sitting on the fence and have RESISTED purchasing Stain Solver for a host of reasons, I'm going to do my best to transform you into a customer for LIFE this Sunday.

One of the sizes, it's going to be a surprise, is going to be discounted so deeply that I hope we don't run out of it. I just ordered more raw materials to make even more of this size as I'm TERRIFIED we'll not be able to fill all the orders.

BE SURE TO OPEN your email on Sunday morning. It will be sent to you at 6:00 AM Eastern Time.

I'm taping a cool video this morning about a very unusual ham radio antenna. As crazy as this sounds, you might be very interested in it because you'll probably feel there's no way it would ever work.

Have a great Friday - or Saturday if you're Down Under like my buddy Phil!

Tim Carter
Founder - www.AsktheBuilder.com
Co-Founder - www.StainSolver.com

Stain Solver

How Hard Can Drywall Be?

drywall being finished new home

How Hard Can Drywall Be? | This is drywall being finished in a new home. The sheets are heavy and you need hand-eye coordination to finish it. (C) Copyright 2019 Tim Carter

How Hard Can Drywall Be? Is it that hard?

QUESTION #1: I’m building a new home and because of the booming economy and shortage of great help, I might be forced to hang and finish the drywall myself. I’ve done a few repairs here and there and wonder if it’s really possible to pull off DIY drywall work on a larger scale. Don’t sugarcoat it. I need to know what I’m getting myself into. Steve B., Spotsylvania, VA

Steve’s in the same boat as one of my new neighbors on my street. A young NH state trooper bought a lot here a year ago and broke ground this spring hoping to move his two kids and wife into their new home by Thanksgiving. He discovered six weeks ago that the rough carpenters he was counting on to frame the house and get it under roof abandoned him. He couldn’t even get others to answer his calls for quotes.

Guess what? This homeowner is framing the house himself with some occasional help from friends. He’ll be lucky, at the rate he’s going, to have it under roof by Thanksgiving.

How Do You Hang Drywall Sheets?

Drywall work is hard. The hanging of the large heavy sheets is mind-numbing. You can rent or purchase mechanical lifts that hold the sheets up to save your back should you proceed. I’d absolutely do this because any helpers you conscript will not have the required experience to hold a giant sheet overhead while securing it to the ceiling joists.

drywall installation

Large sheets of drywall are very heavy. You can rent machines that hold the sheets up against the ceiling. (C) Copyright 2019 Tim Carter

An experienced drywall hanging crew might install all the board in just two days. It could take you two or three weeks as you start to develop speed and accuracy. It’s important to realize you must use the correct screws, they must be the right length, the spacing between fasteners is critical, and by all means, you must not overdrive them tearing the tender drywall facing paper. All the information about this can be found in the Gypsum Construction Handbook published by the USG Corporation.

How Do I Finish Drywall?

Once the drywall is hung, then you need to finish it. I’m convinced, after watching many try to do this on countless job sites, that not everyone possesses the required hand-eye coordination to finish drywall as a pro might do. You have no idea the muscle memory you need to master to not only tape the seams the first time but then also apply the all-important second coat just right.

The consistency of the vinyl taping and finishing compound is critical. You can’t have it too stiff and if you add too much water, you dilute the water-based glue that’s part of the product. Many finishers strive for a consistency that’s close to warm cake icing.

Taping drywall looks easy. It’s not. The most common mistake is to remove too much of the joint compound from under the tape. If you do this, the tape will blister when you go to apply the second coat. Your goal is to leave just under 1/16th inch of drywall taping compound under the tape. Once again, refer to the Gypsum Construction Handbook for guidance.

Let’s assume you successfully tape all your new drywall. Now comes the most challenging part. You need to cover over the tape with a second layer of finishing compound. I can’t begin to explain how difficult this is to get right. To add further misery, there’s a very specific methodology to what flat and tapered seams and which side of inside and outside corners get coated the first day. You don’t want to run into a situation where you’re trying to apply a second coat at the same time where a flat seam intersects an inside or outside corner.

The edges of the second coat must be feathered to nothing. This requires you to bend the blade of the finishing knife you’re using. Press too hard and you’ll scratch the paper facing. Apply too little pressure and you’ll probably leave a little too much compound on the wall. Don’t forget, all new finishing knives have to have the sharp corner filed down ever so slightly!

You don’t want to leave too much compound humped up in the middle of seams. This will show up at night when light travels at a low angle across the walls and ceiling. Butt seams where the ends of two sheets of drywall touch one another are an extreme challenge. You’re forced to hump up the finishing compound higher than the unfinished drywall and it needs to be feathered out about one foot either side of the center of the seam to make this buildup invisible.

Some professional drywall finishers skim coat all of the drywall after everything is sanded. This extra step fills in the tiny void spaces in the paper facing of the drywall. The entire wall and ceiling surface then has the same sheen and texture when you paint. You can purchase special paints that eliminate the need for skim coating new drywall.

If you’re in the same situation as Steve and my neighbor, I wish you the best of luck and know one thing: Elephants are best eaten one bite at a time.

Column 1315

August 18, 2019 AsktheBuilder Newsletter

Are you a new subscriber? I'm about to summon my fellow New Hampshire wizards to cast a protective spell on you and all your underwater allies - assuming you fish - so that you're blessed with good fortune in all your home improvement endeavors. Catching fish is on you.

If you happen to be a seasoned subscriber, you can send a message to the NH Guild of Wizards and Enchantment and we will offer you our protection. I'm one of the founding members of the Guild.

The New House Update

You may be one that's asked about the status of my daughter and son-in-law's new home in Bar Harbor, Maine. This cozy town is on Mt. Desert Island (MDI).

The project started ten months ago next week and I'm sorry to say it's not finished.

It's very important for you to realize I'm not the builder. I'm just the plumber, electrician and radiant heat man.

The builder discovered early in the job that he underestimated the cost and to make ends meet he goes to work on jobs where he can cover his expenses and generate a profit. This means days and days go by where nothing is happening.

The drywall is not yet complete, the exterior siding is not complete and there's lots to do to get it ready for a move-in date.

I intend to do a full autopsy on how this might have been prevented, but understand that they're building in a very unique environment on MDI. There's a shortage of builders, the economy is BOOMING, and my daughter and son-in-law are competing against the ultra-rich who cause the prices of things to be unnaturally HIGH on the island.

I'm sure you have your own take on the situation. Please be aware that if you email me any questions or comments about this I may not respond because of the incoming volume. You might want to wait for the full-blown autopsy in several months.

Do You Own A Pet?

Kathy and I are trying to take our Stain Solver business to the next level. One area of great interest is pets.

Stain Solver is an excellent pet product to have around your home because:

  • it's certified organic and made in the USA with US ingredients
  • it cleans up all pet messes - vomit, #1, #2 and male cat spraying
  • it DEODORIZES - most dogs create a *dog* odor on things they lay on
  • it deep cleans all pet food dishes keeping your fur babies healthy
  • it cleans YOUR chairs, couches, carpets, etc. when the dirty animals tear through the door

I could go on and on.

Here's where you can help.

Do you belong to a pet group on Facebook or on some other social media platform?

If so, can you spread the word about how great Stain Solver is to clean up after pets?

Look at the photo below to see how HAPPY these two kids are because Stain Solver cleans all pet messes up around their home!

stain solver happy boys

Epoxy a Masonry Anchor MAGIC TRICK

Do you think you know the best way to drill a hole for a masonry anchor? Let's see if you do.

drill anchor trick
CLICK or TAP HERE to check the depth of your intelligence. You're going to see a great video - trust me.

The Shower Arm DooDad Gizmo Drop Ear

"WTH are you talking about, Tim?"

"Oh, you mean that special brass fitting that STOPS all behind-the-wall water leaks? Yeah, you BETTER watch this NEW VIDEO of mine to make sure your plumber uses the RIGHT ONE!"

water armor drop ear
CLICK or TAP HERE to watch a short VERY IMPORTANT video that can save you thousands of dollars of DAMAGE in your home.

Gambling Thousands of Dollars

Each week I get quite a few emails into my Ask Tim page. You may be one. In many cases the situations are such that if you make the wrong decision the resulting mess and repairs might cost you thousands of dollars.

Jason was in this situation a few days ago. But he chose poorly. He decided to gamble.

I want you to read what he sent me, but before you do, here's a little background.

I can only devote about 15 minutes each day to the Ask Tim questions. I'm sure you understand why. If I just pounded away all day answering those incoming questions, I'd never get any work done that funds the paychecks of the AsktheBuilder team members, pays the rent, blah blah blah.

Often the questions require detailed and long answers. In 99.99999% of the cases the visitor ALWAYS comes back with several follow-up questions. I understand why because I'm discussing things that are foreign to her/him.

That's why I came up with my 15-Minute Phone Call and my increasingly popular (better value) 30-Minute RECORDED phone call.

Yes, I record the call so you don't have to take notes. You can RELAX during the call and go back and listen to the recording as many times as you want.

Anyway, here's the text and photos Jason sent me. Think about how you'd answer his questions:

I am having a house built. It is to be a two story home with a basement. It is currently 90% done through the framing process and I took a peek in the basement recently. There are two steel I-Beams spanning the entire width of the house that look like they should be connected together. There are others, but this set is my concern.

Pictures:

1. Longest section of beam sits inside of the concrete foundation recess on top of steel shims. (Seems okay)
2. Same beam as (1), the other end meets with a shorter I-Beam on top of a support post. The seam of these two beams does not appear to be centered over the post, rather one is resting on the tab on the side where you would use bolts to connect the post to the beam. There is also a significant gap between the two beams and they are not secured together. (Concerned mostly about the placement of the beam on top of the tabs instead of the post itself.
3. Shorter I-Beam that shares the support post reaches to the other side of the house and does not reach the concrete recess in the foundation. There are some shims in there, but they just move around and are not really doing anything but sitting there. (Concerned that the beam doesn't even reach into the foundation recess)

Please lay my concerns to rest or provide some advice on bringing this up to the builder so it's not just ignored or brushed off as "oh it should be fine just like that" if it's really not.

Thanks,

Jason

Jason I-beam foundation recess

Jason I-beam support post

Jason I-Beam Not reaching support

Here are TWO columns on the AsktheBuilder.com website that Jason could have looked at before reaching out to me.

Residential Structural Steel Beams

and

Column and Beam Construction Tips

What do you think? Do you think those two columns could have helped Jason? If you think so, SHARE your feelings in the COMMENT SECTION under each column.

By the way, those giant i-beams you see at the top of each column are in the last home I built for my family. Realize you can get TALLER beams that require FEWER steel columns in your basement. You don't need columns every 8 feet!!!

That's enough for a Sunday.

Today is burgundy shirt day with a deep-blue paisley bow tie for church. It's pretty smart looking if I don't say so myself.

Tim Carter
Founder - www.AsktheBuilder.com
GET YOUR STUFF CLEAN NOW! - www.StainSolver.com
NJ Skeeter QRP Contest Today!!! - www.W3ATB.com

P.S. Want to feel like you're floating on a cloud? Go through your closet and drawers and DONATE all the clothes you no longer wear or need. WOW, I did this a few days ago and I feel FANTASTIC!

Restoring Rusty Paraphernalia and Water on AC Units

Restoring Rusty Paraphernalia | This 50-year-old two-wheeled hand truck was neglected and left outdoors for quite a few years. With less than two hours work, it looked brand new. (C) Copyright 2019 Tim Carter

Restoring Rusty Paraphernalia

QUESTION #1: What can you tell me about painting rusty metal? I want a fast and easy method to repaint an assortment of things in my garage and shed. Do you have to remove all the rust before you paint? Are there secret non-toxic chemicals that will remove rust? What paint would you use? Thanks. Debbie M., Ely, NV

Nevada is dry. Debbie lives in the Great Basin, the place were rivers go to die. Even still, there’s enough humidity to rust bare metal.

I’ve had tremendous success over the years painting rusty metal. The good news is you don’t have to remove all the rust. Not by a long shot.

The only non-toxic rust-removing chemical I’m aware of is white vinegar. It’s an amazing rust remover for very light rust on metal. I saturate a paper towel with the vinegar and press it onto the rusty metal. Within a few hours the rust is almost always gone and I don’t even have to rub the metal!

Just this past weekend, I restored a wonderful two-wheeled hand truck that you see delivery people use. It was almost fifty-years-old and very well made. Cheap ones you see online or at home centers don’t come close to matching its strength or design. This is one reason I try to restore old things as I find that many of my older implements and tools are constructed much better than what I can buy today.

hand truck finished

Years ago, the best metal primer I used had both zinc and chomate dust in the paint. Oh my gosh was it a great rusty metal primer! I believe this paint was discontinued over litigation worries about heavy metals in consumer products.

I now use a name-brand rusty metal primer on rust-coated steel. So far it’s performed very well. I tested it just last year painting some rusty steel and on purpose I didn’t coat the primer with finish paint. I subjected the primed steel to the harsh New England winter including all sorts of salt spray from highway driving. Months later, the primer looked like the day I applied it.

Step one is to read the label instructions on the can of the rusty metal primer you decide to use. Follow the instructions to the letter. Often the instructions say to remove rust scale and as much loose rust as you can brush away with a wire brush or coarse 60-grit sandpaper. You can use a wire wheel on a spinning electric grinder to make this work go very fast. Wear leather gloves and full eye protection. A breathing mask is also a good idea as some of the old paint you might be turning to dust could contain lead.

Once you’ve got the rust under control, take an old paint brush and use it to brush away any rust dust. Apply the primer and allow it to dry. As soon as the label on the primer says you can apply the finish paint, do it. Often this is just in a few hours. Doing it this way allows the finish paint to get a much better bond to the primer than if you prime something and then paint it weeks later.

Purchase the most expensive gloss finish paint you can afford. Higher prices often, but not always, equate to better ingredients. Once again, follow the instructions on the label of the finish paint for professional results.

Water on AC Units

QUESTION #2: Tim, can you share advice about whether or not it’s a good idea to spray water on a hot outdoor AC compressor so it runs more efficiently? I saw an ad for a special sprinkler made for this purpose. It seems like it would work as water refreshes me when I’m hot. Jim McM., Boca Raton, FL

I absolutely love questions like Jim’s. I get them week in and week out on my AsktheBuilder.com website. Jim did the right thing, in my opinion, by reaching out to me to ask about something before spending money or doing something that might cost thousands of dollars to repair.

I prefer to apply critical thinking skills to questions like this. The first thing that pops into my mind would be the owners manual for the AC unit. I would want to read it to see if the manufacturer recommends for or against spraying the unit with water. I know, it rains on outdoor AC compressors, so how bad can it be to spray it with hose water?

For one, the water from the hose might be hard and lime scale could start to build up on the cooling fins of the machine. Second, water from a sprinkler might not hit the compressor the same way rain does.

I’d then think about whether I’m really saving money. In my case, I get my water from a well so the water is free. I do have to pay a very small amount of money for electric to get the water from the well, but maybe that’s a few pennies per day.

You may have to pay lots for water at your home. You’d also have to time the water so it only runs each time your compressor turns on. How much is this complex timer setup going to cost?

For all of this to make sense, you’d have to save more on the electric to run the AC compressor than you pay for the water PLUS the cost of the special sprinkler and timer setup. I’m willing to bet money that it would take decades, or longer, to just break even.

Column 1314

August 11, 2019 AsktheBuilder Newsletter

Did you just subscribe in the past week? TNX as we say in Morse. I'll do my best to save you lots of time and sweet moola in this and future newsletters.

You might be an older, not age mind you, subscriber. Thanks for sticking around and this issue might astound you. As Kenny Chesney says in his hit song, "only time will tell, but it ain't talkin' ".

Do You Think Critically?

What is critical thinking? I define it as stepping back when confronted with a problem and considering the possibilities and secondary reactions to a solution.

What the HECK does that mean, Tim?????

Here's an example. You have a roof leak around a chimney and a young roofer shows up to fix it.

He comes down the ladder after surveying the situation and goes to his truck to get a tube of caulk. You ask him, "Is caulk the best material to stop the leak?"

He answers, "Oh yes, I've been caulking leaks like this for nine months now with no issues."

Then it hits you. A voice in your head whispers, "I don't want to ruin your day, but back 200 years ago when they built those cathedrals in Europe with the steep roofs they didn't have caulk. What do you think those roofers did to keep the roof timbers dry?"

That's some critical thinking.

Several days ago I got an email from Jim down in Boca Raton, FL. Here's what he said:

"I've seen advertisements for systems to spray water on A/C condenser units which in theory use evaporative cooling to assist the cooling of the refrigerant in the condenser coils. I can see why it might help but is it a good idea?"

Jim started the critical-thinking process and then decided to get a second opinion. Good for him! My guess is his gut didn't feel the company was telling the whole truth in their ad.

I've done expert testimony work for nearly twenty years and you know that a half-truth is a whole lie, right? That's why when I'm sworn in during a deposition or courtroom appearance I have to say, "I swear to tell the truth, the WHOLE truth, and nothing but the truth."

Let's take the next step in Jim's situation. I'd step back and ask these questions out loud. When I do this sometimes, my wife Kathy is convinced she's married to a fool.

#1. I wonder what the owners manual has to say about spraying my AC condenser unit with water? After all, it does get rain on it, so it might not hurt it!

#2. Hmmm, I wonder if the water coming out of my hose is the same as rain water? After all, I get hard water stains on my faucets inside but I don't recall seeing them on my car after a rain shower? That's interesting......

#3. I get my water for free (well not totally since I have to pay a tiny amount for electric to power the well pump) since I'm on a well but others have city water that might be expensive. I wonder if I'll really be SAVING MONEY on my AC electric bill by SPENDING MONEY in extra water usage?

If you don't know all the questions to ask when it's time to do critical thinking, I can help you out. Don't forget about my simple private phone consulting service.

Small Speaker - BIG Sound

Klein Wireless Speaker

A few weeks ago, I got this speaker so I could amplify the sound coming out of my low-powered amateur radio. That's a pretty specialized use, but hang in here with me.

Let's say you want to listen to some tunes out in your garage, on your deck, next to your pool, etc.

Your smartphone has Bluetooth and you've either got stored music on your phone or you subscribe to a streaming music service.

This dandy Klein wireless speaker will make you feel like you're at a Def Leppard concert, or maybe some other band.

CLICK or TAP HERE to see lots of other photos and to see why I LOVE LOVE LOVE this little speaker.

Tim, What Books Do You Read?

I used to share with you the books I read at night before I go to Sleep Land.

I decided to create a page on AsktheBuilder.com and put all my favorite reads there. I just built it this morning and have to add MANY more, but I've got a good start for you.

CLICK or TAP HERE to see what holds my attention and interest. I'll add quite a few more by next week. You may want to bookmark this page BTW and check in every few weeks.

Cleaning Tips Series

Kathy and I are devoting LOTS more time to the Stain Solver business.

We launched Stain Solver back in 1996 I think. I can look up when we applied for the trademark.

Stain Solver is a certified organic multi-purpose cleaner. The two pure ingredients are made in the USA. We blend them together and fill the bottles in a Chicago facility.

Stain Solver Oxygen Bleach

You may have used Stain Solver for years, but for cleaning only ONE THING.

I've made a HUGE MISTAKE by not sharing with you ALL the HUNDREDS of things you can renew using Stain Solver.

Well, I began to correct that mistake last week. I started to build a very cool cleaning tips series where you get a FREE NEW short cleaning tip every three days in your email inbox. I decided on every three days as I didn't want to overload you.

You can save HUNDREDS of dollars by salvaging something you thought was ruined. You can save HUNDREDS of dollars cleaning something yourself with Stain Solver that you might hire a pro to do. Hundreds of Stain Solver customers have done this.

I URGE you to sign up for this cleaning tip series because I GUARANTEE you'll get a tip one day and say, "You've GOT TO BE KIDDING ME!!! I had NO IDEA I could clean that so easily!"

CLICK or TAP HERE to sign up for the FREE series.

Here's an example of one of the tips. Imagine getting this photo in your Inbox:
Stained T-shirt

CLICK or TAP HERE to see what Kelly's gross t-shirt looked like AFTER SOAKING it in Stain Solver.

That's enough for a Sunday morning.

I'll be wearing a new real bowtie - one you have to tie - to church this morning. It was given to me by a stranger last week. It's a gorgeous tie with lilacs on it. I'm the head usher at church and people compliment me all the time on my ties, especially when I wear my flag one.

Tim Carter
Founder - www.AsktheBuilder.com
Certified Organic Clean Person of Interest - www.StainSolver.com
Invisible Adventure Man - www.W3ATB.com

P.S. Boy did I have a great adventure back a few days ago. Cannon Mountain!

Tim Carter Reads

The following is a list of books I've read. You'll discover quickly I'm enamored with history with a sprinkling of mystery thrillers.

In a display of shame-filled vanity, I listed my own book, Roofing Ripoff, at the top of the list. In all seriousness, it's the one you should read first as it only takes one hour and it will save you THOUSANDS of dollars.


roofing ripoff Asphalt shingles, like many things, are not made like they used to be.

My 30-year-warranty shingles started to show serious wear in less than ten years.

I was so upset I decided to find out what was going on within the industry. I sent an email to the Asphalt Roofing Manufacturers PR people and they blew me off. I knew then I was onto something.

Using the wisdom of the crowds, I decided to devote one of my national Ask the Builder columns to the topic. Readers from all across the USA responded to a survey form I mentioned in the column.

A deep-throat source who works in the asphalt shingle industry also stepped forward and assured I'd not reveal his identity, he agreed to a 90-minute recorded phone interview. What he told me will shake you to the core of your being.

Roofing Ripoff is available as a paperback, a Kindle download, or an Audiobook!

CLICK or TAP HERE now to get your copy. Wait until you see the full-color graphics on each page. I doubt you've ever seen a book like this one.


Say what you will about Steve Jobs, his life story is beyond interesting. I think part of the allure of this book to me is captured in the lyrics of Don Henley's hit song, Dirty Laundry.

I've been told by many of my friends that my attention to detail on craftsmanship borders on obsessive-compulsive. When you look at how I make sure the slots in the screws in switch and outlet cover plates are always straight up and down, you might be right.

Steve was OC too - to a fault. He also understood how to sell sizzle. One other character flaw was not trusting doctors. He had all the money he needed to get early treatment of his cancer. Who knows, he still might be with us and his family had he attacked the demon earlier.  CLICK or TAP HERE to see how close Apple was to going out of business back decades ago, yet Steve died a billionaire.


Although widely rumored, I'm not the grown-up Ralphie. All too often people say I look like him and wonder if I was the child actor.

When you read the actual book that inspired the classic film, you'll howl with laughter. The actual screenplay and audio from the movie are in the same voice.

It's important to realize that I did own two BB guns. I didn't have a Red Ryder, but the one I did have was very accurate.

I also owned a CO2 BB semi-automatic pistol.

In the spirit of doing stupid things as Ralphie did in the book, one day Johnny Boncutter and I decided to play real cowboys and Indians in the woods behind my house shooting at each other.

Johnny had my rifle and I had the pistol. When you first put in a fresh CO2 cartridge the BBs come out with tremendous force. One of them hit Johnny in the thigh and I shot him out of a low tree.

We were NUTS to do this with no eye protection. This is why women live so much longer than men. CLICK or TAP HERE to read some of the other crazy stuff Ralphie did that wasn't in the movie.


I can't remember how I stumbled across the Bill Travis mystery series by George Wier, but I'm glad I did. Desperate Crimes is the first in the series and I think George is up to #15 now.

Bill Travis is the main character and his diligence and determination are inspirational.

George is a good writer and he keeps the story moving.

If you think you're good at guessing the endings of mystery books, then George will put you to the test.

I'm convinced you'll feel you got your money's worth and the books get better as the series expands.

CLICK or TAP HERE to start reading or listening to Desperate Crimes.

 


Have you ever been to the Hoover Dam? I was lucky enough years ago to be able to drive across it. After the terrorist attacks by the radical Islamists on 9/11, the Federal Government knew they had to make it nearly impossible for a terrorist to blow it up, so they built the new bridge that now crosses the Colorado River next to the dam.

But I digress.

This is an insanely interesting book. Built during the Depression years, men and their families streamed to the bleak and blistering-hot desert to build this incredible dam.

The US Government solicited bids for the dam. They only wanted contractors to bid for the labor as the government was going to buy the materials directly.

What do you think the winning bid was for the labor?

Can you imagine what it took to create the two diversion tunnels that had to built to channel the mighty Colorado River as the dam was being built?

Can you imagine pouring concrete NON-STOP for years no matter what the weather was? Think of those logistics.

CLICK or TAP HERE and be ready to be blown away.


My college degree is in geology. I'll never forget going out West for the first time.

I went with Pete and Charlie in Pete's new 1970 Volvo. I had never seen such scenery and I feel that trip sold me on studying geology.

Rough Hewn Land is a book written by a geologist, but it's for people like you that don't know the difference between a piece of schist and a strike-slip fault.

Wait until you see the sense of humor Keith shares in the captions in his photos. BWHAHAHAHAHAHAAHAHAHAHAAHA!

Did you know that The entire state of California is built from rocks scraped off the deep ocean floor like you'd shave a wafer of wood using a plane?

Did you know that the astounding Sierra Nevada mountains were made by melting an enormous slab of ocean floor as they are sucked beneath the North American continental plate?

Do you like to invest in ocean-front land before the prices go to the moon? Keith shares why you might want to visit Las Vegas and start looking around for vacant land out in the desert.

I could go on and on and on about all the things you'll discover about what you see out West, but Keith does a better job.

CLICK or TAP HERE and be prepared to be amazed. The next trip you take out West, you'll have such a great appreciation for what you see.


Do you live in the Pacific Northwest? Do you have family and friends that live there?

You'll want to read Cascadia's Fault. It reads much like a thriller as Jerry Thompson peels back the onion of clues that reveal the Northwest is going to have an earthquake that will end up in the geologic history books.

Do you remember the earthquake that shattered Mexico City back in 1985? No one ever thought that was possible.

The plate tectonics theory that's now widely accepted was just beginning to be understood. The locked-up plate that finally snapped hadn't moved in recorded history.

Guess what other plate hasn't snapped in hundreds of years? Who would think that the appointed local scribe in a Japanese shoreline village would provide one of the key clues to what's going to happen when he wrote about the devastating tsunami that destroyed his village hundreds of years ago.

Cascadia's Fault will mesmerize you and you'll be ordering an earthquake rider on your insurance policy if you live in the Northwest starting in Mendocino, CA. CLICK or TAP HERE now to start reading this book. WOW is all I can say.