Storing Building Materials – Keep Them Dry

building materials stored outside

Storing Building Materials | Expensive building supplies and materials are exposed to rain and the sun on this New Hampshire job site. That's not a good practice. Photo Credit: Tim Carter (C) 2021

"Using all of the above things speeds up the construction process allowing you to get a roof on your new home faster."

DEAR TIM: I'm getting ready to build a new home and the weather will start to get colder and wetter. My wife and I are really concerned about materials left out in the weather. What are some best practices we can put in place with our builder so that our house does not suffer any more than it has to? What are some reasonable expectations that we can expect from our builder? What's not too important? Randy P., Racine, WI

DEAR RANDY: It's really smart for you to think about storing building materials before you start your new home. It's even better to include provisions in your contract about storing building materials and wet construction situations. Storing new building products safely preventing damage and them getting wet is important.e Many people freak out about their houses getting wet during the construction process, but they need to realize that water and construction go hand in hand unless you're building in the Atacama desert.

Is It Okay For Lumber to Get Wet?

Yes, it's okay for lumber to get wet. But getting lots of rain on framing lumber for extended periods of time is not a great idea. This is why it's a fantastic idea to build using:

Using all of the above things speeds up the construction process allowing you to get a roof on your new home faster.

CLICK or TAP HERE for FREE BIDS from local builders who will use wall panels and build FAST!

Should I Specify Materials Not Harmed by Water?

The first thing to do is specify materials that are not harmed by water. Traditional oriented strand board (OSB), a material that's supplanted plywood as the primary floor, wall and roof sheathing material, has a bad reputation for swelling when it gets wet. You can now purchase an OSB product for subfloors that's guaranteed not to swell, even if it's got standing water on it.

Are Products Available With Plastic Coatings?

Wall and roof sheathing products are available that have plastic coatings that repel water. These are good products so long as they allow water vapor to pass through them with ease.

Don't worry about traditional wood wall studs, floor joists and roof rafters getting wet. This solid lumber will not be harmed by repeated periods of rain. Many people think that the wood will rot in a short time. This will not happen.

Is it Important to Have a Great Builder?

It's imperative that you have a great builder who has fantastic subcontractors. You want the builder to get the house frame up as rapidly as possible and get the house under roof so that rain becomes a non factor. Have a serious talk with your builder and get firm commitments as to what's going to happen to ensure work is happening on any good weather day.

CLICK or TAP HERE for FREE BIDS from local builders who will use wall panels and build FAST!

To this end, when building late in the season with bad weather a possibility, I'd seriously consider looking at manufactured housing options. It's possible to have your house delivered to the building site nearly completed. A crane can lift the house sections together and in a matter of hours, or a few days, the entire house is weatherproof.

At the very least, consider prefabricated walls that could shave a week or two off the building schedule. Within a week or two, your house could be under roof as many walls can be tilted in place or set by a crane in hours.

Materials delivered to the job site need to be protected from the rain and sun if possible. Stacks of lumber should not rest directly on the soil. Try to get an air space of 4 inches under the wood. Cover lumber with waterproof tarps, but allow two ends to be open so air can pass through the covered lumber pile.

Will Wood Twist and Bow if Left in the Sun?

Wall studs and timbers can twist and bow if allowed to be stored in direct sunlight. It's best to store lumber in the shade if at all possible. This is not easy to do, and it will add to your construction costs if you move the lumber into the structure.

Will Hunting Season Slow Construction?

Understand that hunting season can have a detrimental effect on your house project. In some parts of the USA, hunting season is more important to people than just about anything. Construction workers can suddenly disappear into the forest. They'll sit for hours in the rain waiting for an animal, but they'll rarely work in the rain for money to pay bills. Hunting manifests strange human behavior!

What Should I Do If My House Gets Soaked by Rain?

If your house gets soaked with water as it's being framed and as the roof goes on, be sure to slow the construction process until the lumber dries well. You can make a huge mistake by allowing the builder to install insulation, vapor barriers and drywall over lumber that saturated with water.

If mold and mildew have formed on the lumber, clean it off with certified organic Stain Solver. It's a USA oxygen bleach you mix with water.

Stain Solver black background yellow scoop

Stain Solver is MADE in the USA with USA ingredients that are food-grade quality.

Is Standing Water in a Basement a Good Thing?

Standing water in a basement is not a good thing. Be sure that drain lines are in place or pumps are used to prevent your basement from turning into an indoor swimming pool.

Can I Erect a Tent Over My New House?

If you have a sizeable budget, you can actually erect a large tent over the construction site and create an artificial environment for the builder. You can do the same thing with pipe scaffolding and simple floor trusses that are used to create a temporary roof over the site.

It's all about money at the end of the day. In certain instances, it may make financial sense to go to these extremes to create a dry and pleasant work environment for those working on your home.

Column 952

Thermal Underwear

With colder weather fast approaching, here is a warm tip from Sandra Lee. She offers a tip on staying warm and still having freedom of movement.

"Thanks, I have been receiving Duluth Trading Catalog for many years. I was a mail carrier and I found that wearing "Damart Thermal Underwear" enabled me to wear far less heavier and far less bulky clothing over it.

This allowed more freedom of movement that I needed in carrying a mail bag up and down steps. Check it out, just Google "Damart "USA".

For women, I recommend getting the men's small, if you want them long enough to cover your wrists and ankles."

Sandra Lee

Use Butter To Clean Caulk From Your Hands

Marj Oleske of Martin, SD, provided this tip on how to clean up after using non-water-soluble caulk.

"I just read your newsletter about the caulking that is not water-soluble. I just discovered a great solution.

I'm in the middle of a BIG house addition project. The caulking is also non-water soluble, and of course gets all over my hands. When I am done, I smear butter on my hands, work it in well, as a massage, then add a generous amount of baking soda for a gentle scrub. Wipe with a paper towel, and then wash off the butter.

Works very well. Not bad for a girl...."

Marj Oleske

September 6, 2012 AsktheBuilder Newsletter Update

Yesterday I shared news about the cool Duluth Trading Company Last Pants Standing Contest. Click the link for that if you missed it and want to win some great Fire Hose work pants (they have them for men and women).

However, you may be one of many that brought to my attention there was a problem with a different link I shared. That link was supposed to allow you to get FREE SHIPPING if you just wanted to buy something from Duluth Trading and not enter the contest.

I got numerous emails about the link NOT WORKING.

After hearing about the problem, I reached out to my contact and was told that you just have to enter the following promo code during the checkout process to get FREE SHIPPING:

ELPSASK
Crazy promo code, but it is what it is. I just tested it and it worked for me. If you want to see all the great stuff Duluth Trading has, just click this link that will take you to the Fire Hose pants page. You can surf the entire site from there.

They do have a magnificent line of products for women.

If you do decide to purchase something from Duluth Trading Company, would you kindly email to me what you purchased? I'd be fascinated to see what caught your eye. Maybe you saw something I need.

NOTE: You may have to purchase a minimum amount to qualify for FREE SHIPPING. I can tell you this is so from all the Stain Solver oxygen bleach I sell. Shipping has gotten expensive. It routinely costs me nearly $10, often lots more, to ship a container of Stain Solver to you.

Understand that Duluth Trading can't sell a blouse for $10, that costs them perhaps $4 to make and then have to pay $6 for shipping. They'd go out of business.

If you ever want to have a discussion about shipping costs and running a business that involves shipping products, let me know. Kathy and I have been doing it since 1996. We know much about shipping and handling costs!

September 5, 2012 AsktheBuilder Newsletter & Tips

It might be summer just about all the time where you live. You could be in south Florida, Tucson, Phoenix, or just east of San Diego. Yes, I'm leaving out all the international places like Singapore where several subscribers live and stay warm year round.

But for many here in the USA, as soon as the football season starts, that's Mother Nature turning on the yellow light announcing that winter is just around the corner.

This means you need to start to batten down the hatches and get any outdoor work done soon. This is especially true if you only can work on projects on the weekends. You can't count on that many great days before the weather turns. Keep that in mind.

Oh, and I think this is the Contest and Save Money AsktheBuilder.com newsletter. Wait till you see below all the money and loot you can win in different contests!

 

Toughest Work Pants Contest

I have no idea how many pairs of work pants I've consumed over the years. How about you? I wish I had a photo of the pants of mine that caught on fire one day. That's a story!

Duluth Trading Company, I've used their products for years, is sponsoring a really unique contest to promote their tougher-than-nails Fire Hose pants. If you know a fireman, he'll tell you the fabric used to make fire hoses is TOUGH. Imagine what it has to endure!

This contest is open to men and women because Duluth Trading makes products for both genders!

Do you have a well-worn pair of work pants? Did they save you one day? Do you have the world record for longest lasting work pants? No matter who made the pants, and believe me Duluth Trading doesn't care, they want you to tell your story about how you have the most incredible work pants. You could win free Fire Hose pants and possibly some sweet cash.

In the past year I've started to test and wear the Fire Hose work pants made by Duluth Trading Company. The last two times I was wearing them on top of Mt. Washington. The tough fabric, comfortable fit and the multitude of pockets, slots, for my gear were perfect.

I'm a huge fan of these work pants and I know you will be too. I'm really looking forward to my new pair of fleece-lined ones for this upcoming winter here in New Hampshire.

Go now to Duluth Trading Company's Facebook page, read the current entries and enter the contest. HURRY as it ends quite soon! You really need to go here and read some of the incredible stories about work pants. Can you guess who I voted for?

If you don't want to enter the contest, but want to know more about the neat Fire Hose pants and other great products I'm now using I urge you to go to the Duluth Trading website. They have an enormous amount of great gear, clothes, etc.

I've been told that you can get FREE SHIPPING with your order by just entering the code word ELPSASK during the checkout process. This is a sweet deal and I urge you to take advantage of it.

NOTE: CLICK HERE to read an update on the above Duluth Special.

Product I'll *Not* Use Again! - DAP SIDE Winder Caulk

Last week I had to caulk a few places on my shed where my fiber cement siding touched up against trim boards. I was at the local lumber yard and walked over to the massive DAP caulk display. There in front of me were tubes of SIDE Winder caulk - it clearly said it was for caulking fiber cement siding and windows. Just what I needed. SCORE!

I read the label and it said it was paintable. Good. That means it's water washable, right? Hah! Wrongo.

I started using the caulk and noticed it was sticky like pure silicone caulk. Hmmmmm, that's odd.

Prior to caulking I got my bucket of water and my favorite tile-grout sponge out so I was ready to tool the caulk joints.

I ran the sponge over the caulk and it didn't work like it normally does. Well, that's really odd I thought.

It turns out this caulk is not water friendly. Puzzled by what was happening, I removed the tube from the gun and read the fine print on the label. (I can hear you women now, "Oh, you read the label AFTER you get in trouble, Tim. Typical man.") The instructions said it would clean up with soap and water, but I couldn't get my sponge clean using soap and water.

The next day when the caulk dried, it looked great and I'm sure it will perform well. But if you decide to use it, be aware you better be an expert at caulking. There's no margin for error when it comes to smearing.

 

9-Volt Battery Fire Hazard

Each week I get a newsletter from our local town government. This part of the newsletter I thought was very fitting to share with you:

In July, a fire broke out in a kitchen "junk" drawer which the resident stated she had just cleaned and organized. The fire produced smoke throughout the first floor of the home. In the drawer were spare keys, a cigarette lighter, paper clips, eyeglass cleaner, and some batteries in a baggie along with everything else that you find in a "junk" drawer.

The local fire department determined the cause of the fire to be from a 9-volt battery stored in the same baggie with other batteries. The 9-volt battery rubbed against another battery and ignited the fire. In the homeowner's words, "We were fortunate not to have been away for the weekend!"

A 9-volt battery is a fire hazard because the positive and negative posts are on top, right next to one another. If the ends come in contact with anything metal such as aluminum foil, steel wool, paperclip, other batteries, etc., this will cause the battery to heat up and ignite a fire.

To store, keep in original packaging or keep ends covered. For disposal, make sure the positive and negative posts are safely wrapped in electrical tape.

 

Online Handyman Class - Just Around the Corner!

The past few newsletters I've told you about the online class I'm conducting that covers starting and operating a Handyman business. The outline is almost complete. Watch for news on this class VERY soon.

Why should you consider attending this class? Read this article I just saw in USA Today. I'm not really surprised by this. Years ago, I nudged a good friend of mine into the Handyman business, and he makes this kind of money.

 

You Need Tires to Get Home Improvement Supplies, Right?

A close friend of mine, Chuck Eglinton, is an expert at many things, one of them being how to get great deals when shopping online.

I follow Chuck on Facebook. The other day he promoted a website called TireRack.com. Chuck says that you can buy from them and they will ship the tires to a local affiliated dealer who does the install. The bottom line is you can save money.

A follow-up comment from another person indicated that they just take in a printout of the best price from TireRack.com, and the local tire dealers will match or beat it. Either way, you can save precious moola that you can use to improve your home!

 

Write a Catchy Slogan and Win $1000, $500 or $250

If you've got a creative mind, you might be one of three people that can win three gift cards. If you come up with the best new slogan for ECOBUST, you win $1,000. The second-place winner gets $500, and the third-place winner gets $250. That's not bad for about five minutes of work.

All you have to do is go to EcoBust.com and follow the instructions. ECOBUST is a product that allows you to break up concrete and rocks without using TNT or heavy jackhammers.

 

Wall Control Sale

If you've been a subscriber to this newsletter for some time, you know that I had the good fortune years ago to discover, what I feel, is the best pegboard known to man. It's called Wall Control.

I ran into the inventor at his tiny booth in the basement of the monster National Hardware Show many years ago. When the show was in Chicago, the basement was the place to visit if you wanted to see the new up and coming products from the inventors. Why? It's simple. They often can't afford the prime show real estate and have limited budgets.

All you need to know is you can get some great kits on sale right now at Wall Control. I use this product in my own home and love it.

The kits they have on sale right now only work with all the Wall Control hangers and accessories. Wall Control has panels that have both the slots AND traditional holes for old-fashioned pegboard hanger accessories. Just be aware of what you're getting.

To see everything that Wall Control has, be sure to click the navigation links at the top of this page.

 

Fantastic DIY Gutter Guard Coming SOON!

Oh, do I have some news for you! I've been waiting for years for this product to be available!

Over ten years ago I started testing all sorts of gutter guards. I had hundreds of feet of gutters at my home and needed relief. Early in my testing of just about every gutter guard, I discovered most failed in the spring.

They all did well in the fall to keep big leaves from gutters, but many designs failed in the spring and summer when tiny pieces of trees, seeds, blossoms, needles, etc. rained down on roofs.

It's a long story, but I finally discovered the Holy Grail of gutter guards. Now this company has a DIY product and it should be available to you in 30 days or less.

Just HANG IN THERE. Don't reply to me asking what it is. I'll have a website for you that you can order from the moment they're ready! Please be patient and be sure to open all upcoming issues of this newsletter.

Exterior House Painting Tips and Secrets

DEAR TIM: I just got bids to paint the exterior of my home. Ouch! I'm a little afraid of being on a ladder, but am determined to do this job myself to save money. Can you share any tips on what I can do to be more comfortable? I'd also appreciate any and all tips you can share from the type of paint to use to ways to apply the paint. Remember, I'm on a limited budget, but do intend to stay in my home for many years. Sally T., Lawrence, KS

DEAR SALLY: You're not alone when it comes to fear of heights. Two members of my family freeze solid with a death grip on ladders when they're only five feet in the air. When they see me go up to the top of a 32 foot ladder, they can't even stand to look at it. Fortunately for you, you've got alternatives, lots of alternatives.

Let's talk about ladder options first, then we'll jump into some sweet tips that will get you professional painting results. Please understand it's impossible in this short column to cover everything there's to know about painting and all the great painting aides that exist.

You can get professional painting results and work safely if you use some of the things you see here. Photo Credit: Tim Carter

If you have a fairly level lot and good access around your house, you can rent a motorized man lift from a tool rental business. This is a hydraulic work platform similar to utility company cherry picker trucks. The platform allows you to stand on a wide level surface that goes up, down, left, right, in and out. Working controls at your fingertips while standing on the platform, you can get to every part of your house to safely paint it. The platform has sturdy guardrails and you'll be very safe.

If you decide to rent one of these machines, be sure to get training on how to use it and be sure that you don't come into contact with any overhead wires or cables.

If you can't afford to rent one of these amazing machines, perhaps you can affordably rent iron-pipe scaffolding. Bricklayers use this to work and it comes with all sorts of sloped stairs, wide platforms, guardrails, etc. You can erect it with help from a friend and create very safe work platforms 20 or more feet in the air.

You might be able to hire a neighborhood handyman at a much reduced rate to paint just the areas that cause you to feel queasy. You can work side by side with him to provide support and materials so the job goes faster.

Many years ago, the first home improvement company I started was with a college friend named John. We painted houses in the summer. He later went on to become a chemist that worked for one of the major paint companies. When he was studying to get his PhD, you know what he told me one day? The chemical formula for most paints is strikingly similar to that of glue. John said, "Paint, for the most part, is just colored glue. Don't forget, glues come in all sorts of strength!"

That has stuck with me my entire life, no pun intended. Your takeaway from his simple quote should be two things. First, glue sticks best to surfaces that are clean, dust-free, oil-free, and in great condition. Second, not all paints are created equal and some will not adhere well because the glue component in them is just not that sticky.

All too often most homeowners never read the label on the paint can. They skip over the part about surface preparation, or they think they know intuitively what to do.

Let's exorcize the pressure washing demon right now. Pressure washing is not a bad thing, but it does not entirely clean a surface. You can prove this easily by washing a dirty car with a pressure washer. After the car dries, there's always a slight film of dirt left behind you can wipe away with a damp paper towel or your finger. The same is true for your home.

I prefer to apply a solution of oxygen bleach to the painted surfaces with a hand-pump garden sprayer. I allow that to soak for a few minutes and follow behind with a soapy solution of water using a brush made to clean the outside of RV's. I immediately rinse the scrubbed area with clean water.

Purchase a paint that has a blend of urethane and acrylic resins or glue. These paints are more expensive, but they last and last. I painted my last house with this paint over twelve years ago and it's never peeled, the color has not faded, and the paint looks like new when it's periodically washed with regular liquid dish soap and water.

Avoid cheap brushes and paint tools. Great brushes and rollers allow you to apply more paint faster with professional results. Get your brush damp first before using water-based paint. This helps keep the paint from drying up high on the brush. Never turn a brush upside down in a stream of water to clean it.

Avoid painting on hot, windy days. It's best to paint on overcast days with no threat of rain if at all possible. Do not paint in direct sunlight if possible, especially dark colors. Blisters can form as the paint dries too quickly on the surface trapping water under the paint skin.

You can watch multiple exterior paint videos that contain secret tips at www.AsktheBuilder.com. Simply type "exterior paint video" into the search engine at www.AsktheBuilder.com.

Column 951

August 28, 2012 AsktheBuilder Newsletter & Tips

My shed project is coming along. It's going a little slower than I'd like, but that's because my helpers are no longer here.

Robert Moore was here early in the project for nine days. He and I transformed the site in that short time from eight holes in the ground to a structure with all the rafters in place.

My son Tristan helped before he headed back to school. If I was fortunate enough to have a helper every day for the past two weeks, I'd be painting the siding right now!

The roof was completed last week and looks superb. I used GAF Timberline HD shingles that match those on my house. They were easy to install, and are going to keep the shed dry probably until the year 2050. Asphalt shingles last much longer on steep roofs than they do on low-pitched roofs.

This past weekend, I installed the two magnificent Simonton ProFinish windows. One of the many things I love about these windows is they carry the AAMA seal. This means the windows are among the best ones made on the planet. I've written extensively in the past about the importance of having windows and doors that have the AAMA gold label.

I've lost count of how many videos I've taped, but it's going to be way past 100. Here's one I taped this past Saturday after I was completing the window installation. Many of the videos in the series contain one or more Secret Ninja AsktheBuilder tips like the one you're about to discover.

Click the video image below to discover a very important window installation tip.

DIY Shed Window Installation

IMPORTANT NOTE: If you've already purchased my DIY Shed Video series - either in the past month or when the project was announced on Kickstarter, do NOT read the following. You've already paid for the videos. Go down to the next part of the newsletter.

Do you want to know all sorts of building secrets? Ones that can save you hundreds or thousands of dollars? Tips that can prevent costly repairs down the road? This is exactly why I'm building this shed! I wanted to document many of these tips in a real building situation.

You can have lifetime access to the videos now for just $69. That's less than one dollar per video!!! Hundreds of newsletter subscribers have purchased the video series at this price over the past three weeks.

But as I've said for over a month, the price is going up for the entire series as I get closer to the end of the project. Why? Because each day I tape more videos with more tips. The video series gets more valuable each day. It's not rocket science.

At midnight ET on September 2, 2012, the price for the entire series, purchased at one time, goes up to $89.

Click here now to purchase many AsktheBuilder.com Ninja Building Secrets for just $69!

 

Paid Tool Reviews

Last week, I had an email exchange with an employee from a major tool company. I had requested a few tools to review for you.

I was stunned when I got an email today from this person asking me if the review I was doing was a regular public relations review or a PAID review. Paid review? You mean there are other home improvement websites or magazines charging tool companies to write reviews?

Did you know that? I sure didn't. Can you tell me if you've read other tool reviews at other websites and seen small print at the bottom of the review saying the author was PAID to do it? I'd love to see that. I'd love to know who's doing this.

Getting paid for the review seems very unethical to me. It seems it would absolutely skew the review as the reviewer would be obligated to give a favorable review.

What other online reviews are like this? Holy molly, who can you trust anymore?

 

Ryobi ProTip Paint Sprayer Review

Ryobi ProTip Paint Sprayer

I can tell you for a fact I didn't get paid to review this Ryobi tool. I don't get paid for ANY product reviews I do.

I used this tool to paint some of the soffit boards on my shed. Go read my review now to see how it did!

 

Turning a Door Around

Russell Young from Maui, Hawaii emailed me with this question:

"We wanted out-swing double doors so we could have more interior grow space in our 12 x 16 greenhouse. Alas, our builder installed in-swing double doors and will not change it. My question is, can I turn the doors around?"

Russell also said he was a little handy which is why he didn't offer to fund a road trip for me to come to our 50th state and do this with him. But I digress. Heavy Sigh!

My reply to Russell suggested he could take out the doors and turn them around, but he'd have major leak issues when it rains.

I said this assuming the french door unit was made as a traditional in-swing door that was designed to shed water towards the exterior. Realize that doors and windows have sloped sills and the entire door system is made to shed water one direction ONLY.

You can purchase exterior doors that are outswing. They're made to shed water the right way.

 

Paslode Cordless Roofing Nailer

Paslode cordless roofing nailer

Building the shed is giving me an opportunity to test out lots of great tools. I just finished my tryst with the Paslode Cordless Roofing Nailer. Read all about the steamy details. It was hot and humid while installing the roof.

CLICK HERE to read the Paslode Review

 

Exciting Stain Solver News

I've been waiting for over a month to share this. It's going to dramatically change the Stain Solver business. CLICK IMAGE to discover more about Stain Solver

Stain Solver bottle

Are you part of a mommy buying co-op like Carolyn? Carolyn and a bunch of her young mom friends are buying multiple bottles of Stain Solver to make cleaning easier in their homes.

Do you give useful gifts away to your customers like Jack Cherco, a Chicago remodeling contractor who's going to give Stain Solver to his clients?

Do you want to give small containers of Stain Solver away to friends and family as gifts?

Do you own or work in a small business like one of these:

  • Wine Shop
  • Dress Shop
  • Furniture Store
  • Carpet Store
  • Tile Store
  • Hardware Store
  • Pet Shop
  • Motel
  • Health Food Store
  • Natural Products Store
  • etc.

That's just a partial list of stores that should sell Stain Solver to their customers. Can you imagine the store clerk at a dress shop handing you a bottle of Stain Solver to you saying, "Here, take this as a gift from us. If you happen to spill anything on your new valuable dress, Stain Solver will safely remove the stain." Carpet salesmen, furniture salesmen, etc. can do the same thing when someone places an order for a large purchase.

I'm pleased to announce the 2.2-pound and 4.5-pound sizes of Stain Solver are now available in multi-packs.

It gets better - much better. They're DEEPLY DISCOUNTED so you can RESELL them if you own a business. Some business owners will give away Stain Solver. Others may just want to sell it for a profit. Either way is just fine. Whatever works best for you.

Sarah at the Cornacopia Bakery and Health Food Store in Bristol, NH is starting to stock Stain Solver. So are Julie and Gary Piehn at Gilcrest Cottages in Thornton , NH. Julie is going to sell Stain Solver to the people who stay at her cottages.

Craig Smith, a co-owner of Twins Ace Hardware in Fairfax, VA just placed his *second* order for twenty-four 2.2-pound bottles of Stain Solver.

Kathy and I have been waiting for this day for years. We've wanted to expand the Stain Solver business and make it available for you locally.

But we need your help. If you're a small business, order some to sell or give away to large customers.

If you don't own a small business but patronize them, suggest to the owner that she/he should be stocking it. That way you'll come in and buy it from them.

Now here's the problem. You knew this was coming didn't you?

Since we didn't know WHICH multi-pack would be the most popular, we only manufactured a certain amount of each size.

I already know we're going to sell out in HOURS in this Ultra-Soft Launch of these three new SKUs. This happens to businesses all the time.

When Apple launched the iPhone years ago, each store only had so many phones. I'm sure you understand I can't afford to make thousands of each SKU and have them sit in a warehouse *hoping* they sell.

This is why I need your help and your patience.

If you want one of the new multi-packs and you go to the store and see the message Out of Stock - Please ORDER it. You'll then be first in line to get yours once we fill all the back orders.

Don't leave the cart saying, "Well darn it. I'll just order when Tim get's more."

Order it *now* so we make enough to satisfy the demand. If you order now, I anticipate you'll have the product in your hands in five weeks or less.

I'm not going to run away with your money. As soon as we get a feel over the next few days how many of each size are selling, we'll get the machines mixing and packaging!

I hid these new SKUs in the AsktheBuilder.com shopping cart for this soft launch.

Don't go to StainSolver.com looking for them. You'll NOT see them there.

Go here:

6 pack of the 2.2 Stain Solver

12 pack of the 2.2 Stain Solver

6 pack of the 4.5 Stain Solver

Thanks so much!

Tar Paper Facts Video

Tar Paper Facts

Hi, I'm Tim Carter and I want to talk about a little about tar paper and how it is a great weather barrier. Tar paper is being installed on the sides of the shed I am building.

Tar paper has been used for well over 100-years as a highly effective weather barrier. It is waterproof and work under any type of siding or brick. It will keep your OSB or framing dry from any water that gets behind the exterior finish. It is affordable and effective. Tar paper is time-tested and it works. Installation is simple and easy.

On other remodeling jobs where I have taken apart some of the exterior, I have found tar paper that is 80, 90 or 100-years old, it may be brittle now, but it is still water repellant. The wood behind the tar paper was as dry as the day the house was built.

Tar paper really works. There are some other newer weather barriers out there, and tar paper might not be the latest, but it still is worth a look on your next project.

The Paint Brush Cover Video

Hi, I'm Tim Carter and I want to show you a neat invention. It may not be the first, something tells me that there are other things out there similar to this. I just got this sent to me and I am using it on a project right now. It will save me some time and money.

This is a plastic case with a hinged lid. This case will fit a one-inch to three-inch paint brush. Currently, I am storing a paint brush with paint in the case. The job I am working on right now, requires that I touch up the paint on some soffit off and on throughout the day. I don't want to be washing the paint brush every time I touch up one of the boards.

This case will hold the brush with the paint. The most important part of the case is the foam rubber around the paint brush handle. These foam pieces keep the case air tight. The paint on the brush will stay fresh because of the humidity inside the closed-case.

The Paint Brush Cover is a neat invention. Since the paint inside stays wet, you can easily clean the paint inside the case. And it will look brand new once cleaned. This is a great little item to have for your next project.

Ryobi ProTip Paint Sprayer Tool

Ryobi-ProTip-Sprayer
I had a queasy feeling the moment I pulled the Ryobi ProTip Paint Sprayer Tool from it's cool green soft-sided case. The tool seemed heavy and off balance, and there was no paint in it yet.

Now I have to be totally honest before we go any farther. I've never been a fan of homeowner paint sprayers because they just don't work like the professional sprayers I've seen on job sites or in factories. I'm not an expert when it comes to paint sprayers by any means, but the really great sprayers, even cans of spray paint from the hardware store, produce a very fine mist of paint.

The paint sprayers I've tested all seem to spit larger globs of paint on the surface, and they make a racket doing so. Are you starting to see where this review is going?

As I do with all new tools, the next step was to get out the Owner's Manual and read it. It was a small paper document that seemingly didn't include any graphics. There were phrases in the instructions that had you turn to the back of the manual to find the illustrations, but believe me, you can overlook these.

Where you'd expect to discover an exploded tool view and detailed drawings at the front of the manual, these were buried deep in the back of the document.

If you're an impatient user and/or a *visual* learner, you'd never find them. You'd gloss over the references to the illustrations at the back of the manual. Once you got to the Spanish language version of the instructions, you'd utter, "Oh great, no illustrations!"

One of the first things you have to do is lubricate a piston. I took apart the tool tip like they said and found, what I thought to be, a tiny metal part that looked like a piston to me. But I wasn't sure.

A link to an online video of the startup procedure would have been ideal. I'm astonished that tool manufacturers do not create videos, simple ones, that show you how to get started with their tools.

Videos like this are essential when you have to perform some mission-critical task like oil a piston. If you get this wrong and lubricate the wrong part, my guess is the tool freezes up and stops working.

Nowhere in the instructions did it say to thin the paint. I was using a top-of-the-line urethane-based paint from Sherwin Williams called Duration. It's thick. I added some water to help lower its viscosity and stirred it well. Even with this added water, the paint was very heavy bodied.

It was time to spray! I poured the paint into the translucent paint container, twisted it back into position, plugged in the tool and picked it up. Oh my, this bad boy was really heavy now, and putting a strain on my wrist because of how long the tool was. Not good.

I pulled the trigger, the pump started to work and the spitting started. Yes, this tool was just like all the previous ones I've tested. It spits paint onto the thing your painting. It's not really a sprayer in my opinion, it's a paint spitter. Now, mind you, the drops of paint are tiny, but they are not like the ones that come out of a spray-paint can. Not even close.

This tool comes with a unique feature that allows you to rotate the tip to unclog the tool. After just three minutes, I needed to use this. The tool stopped spitting, I mean spraying. It drooled a lot with the paint dripping down the front of the canister. Soon, I discovered it was done for the day.

No matter what I did, I couldn't get the tool to start spraying again. After another three minutes, I gave up. I took the tool down to the driveway to try to clean it up and salvage the paint in the container. While at the garage, I got out my trusty roller pan and a roller frame with a 4-inch roller. Within minutes, I was painting.

I was trying to paint flat pieces of plywood I had cut for a soffit installation. I didn't time the first few I got done with the sprayer before it died, but I have to tell you that I'm convinced a paint roller, in this situation, was much faster. It would have been even faster had I used a 9-inch roller frame!

Ryobi makes many other tools that deliver great results. I've used their tools. But this ProTip Paint Sprayer Tool is one that I just can't recommend. Unfortunately it doesn't even rate one hammer. Sorry Ryobi, but it's my job to report what happens when I use tools.

This review was featured on my August 28, 2012 AsktheBuilder  Newsletter.

Tim Carter

Founder - AsktheBuilder.com

The above is an affiliate link. I get a tiny commission if you purchase this item from Amazon.