Gypsum Fiber Underlayment

I can't begin to tell you how many pieces of wood underlayment I have installed over the years. It has to be in the thousands. I have it in my own home. You name it, I have used it: Masonite™, particle board, plywood, luan plywood, etc. Fortunately, I have only had problems on one occasion.

Bubbles

I'll never forget the first big house I built. It was an ultra custom contemporary home that had marble and tile floors. I used 3/8 inch plywood underlayment beneath the marble and tile. The tile was set in thinset - cement based product that bonds tile to wood or to concrete.

It took me two days to install the tile floor in the kitchen. The morning of the second day, I arrived to work and saw that an area of the tile had a hump in it that I didn't remember from the day before. Three or four tiles had popped up. I walked over and stepped on them and the area of the floor was spongy. The thinset bond between the tile and the plywood was broken and I lifted up the tiles to discover the plywood had bubbled up. The water from the thinset caused the plywood to swell creating this large bubble.

Using long drywall screws, I was able to get the plywood to flatten out. But I had learned my lesson. Water and wood underlayment products are a recipe for disaster.

Cement Board

Someone else had the same problem as I did. They decided to invent an underlayment that was bulletproof against water. All they did was modify time tested technology that tile setters had used for years. Any old tile setter will tell you that they installed their tile over wood floors but that they separated the tile from the wood with a layer of cement mortar. It was a very labor intensive job to pour and level the mortar.

The wise inventor simply decided to make cement underlayment in one half inch thick sheets! You simply nail these over newer wood flooring systems. The cement board is totally waterproof, but it is heavy, tough to cut and seams are hard to smooth. Also, pesky grit is produced as you install and work with it. This grit must be removed before you install flooring materials.

A Compromise

The cement board product was and is a fantastic product for certain applications. But there was still a need for an underlayment that was easy to work with and highly water resistant. This opportunity was filled with the new gypsum fiber underlayment.

Easy to Work

The gypsum fiber underlayment is so simple to work with. I have cut some of it with a standard razor knife. It snaps just as a regular piece of drywall snaps. There was virtually no dust when I scored and snapped it. Installing fasteners is a breeze. The product is virtually unaffected by water. If and when water does harm the underlayment, I am quite sure you might have more severe problems with the actual finished flooring, the wood sub-flooring system and/or adjacent walls. In other words, the fact that it is highly water resistant is probably all most of us need.

Availability

The gypsum fiber has great distribution. It also comes in different thicknesses and panel sizes. You should be able to find it at most home centers and large scale drywall distributors. Be sure that the panels come with literature that speaks to the water issue. You should be able to verify that the product is indeed water resistant.

I urge you to also obtain and READ a copy of the installation instructions. This is very important. Don't forget to do this.

Jigsaw Tips Video

Some time your project will require a curved cut in a piece of wood or metal. The traditional circular saw is not the best tool for a curved cut. A powered jigsaw is great for cutting these curves, or even straight cuts. But, they excel at curved cutting.

The new cordless jigsaws don't have that cord to get in the way. And they can be used anywhere on the project site.

Some jigsaws have a quick release lever to changing the saw blades. Simply flip the lever, pull out the old blade and slide in the replacement. Flip the lever back and you are ready to cut. Most have a blade guide roller that helps keep the blade running straight up and down.

This particular jigsaw has another lever that allows the blade to move back and forth as it goes up and down. Makes for a more aggressive cut.

Another cool feature of this jigsaw is the small fan that blows the dust away from the cutting area. This allows you to see your guide line as you are making the cuts.

The base table tilts on the jigsaw so you can make angled cuts through your material.

Cordless jigsaws are great tools for many projects around the house. Be sure to have one in your toolbox.

Water Heater Tips Video

If your water heater fails, there are some helpful tips for the replacement. Be sure you have just one control water shut-off valve on the cold water side. There should not be a valve on the hot water side.

Where the copper pipes attach to the top of the water heater, dielectric unions should be used. When you connect two dissimilar metals, such as copper and iron, in the presence of water, you can get electrolysis. This can cause corrosion of the pipes and eventually a leak. The dielectric union separate the two different metals with a rubber washer. A side benefit of these unions is you can disconnect the pipes quickly with the union's nut.

If you have a gas water heater, the vent pipe must be the proper size to vent the exhaust. If this vent pipe is too small, there will be a backup of the exhaust fumes.

Replace the pressure relief valve when replacing the water heater. Do not try to reuse the valve from the old water heater.

Follow these tips and you won't be in more "hot water" over your installation.

Ceramic Tile On Wood Floor Video

A slate tile will look great in the sunroom. There are couple of tips before installing the ceramic tile over a plywood floor. First, be sure the wood floor is firmly attached to the floor joints. This is a good time to get rid of those floor squeaks. Additional screws will help the wood floor from flexing. If the floor flexes, it will cause the ceramic tile to crack. Use 1-5/8" diameter drywall screws and using a screw gun, tighten the wood floor to the floor joints. If you have a plywood floor laying on another piece of wood, you can start screwing anywhere.

The adhesives used for installing ceramic tile have a lot of water in them. This water can filter down into the wood floor and cause it to warp or twist. Apply a coat of a water based urethane over the entire wood floor before applying the ceramic tile adhesives.

These tips will give you a squeak free and waterproof floor under the ceramic tile or slate tile.

Expansive Soil And Foundation Cracks Video

Expansive Soil And Foundation Cracks

This column was SO GOOD that I shared with the 31,000 subscribers who read my April 8, 2018 AsktheBuilder Newsletter.

When the soil starts to dry out, the clay soil will contract, creating large cracks in the ground. This can spell big problems for your foundation if you have a shallow foundation on a garage or room addition or if your house is built on a slab. These soil settlement cracks indicate that the soil is extremely dry. This can lead to the cracks in your foundation.

To cure this, the soil down about two feet needs to receive water. The water has to get down to the bottom soil quickly. Use an auger to drill holes 2 feet on center and 2 feet from the house all around the house. This will allow rain or garden hose water to travel down into the soil without getting side tracked by the grass and flowers.

Once the holes are drilled, fill them with grounded small, pea gravel. Fill the hole all the way with the gravel. Use your garden hose to fill the hole with water. You will be amazed at how much water the hole will hold.

These holes and gravel will get the water down into the soil and get it moisture. This reduced the ground shrinkage and helps prevent those foundation cracks.

Glass Block Video

Glass Block

In the past, working with glass block was the same as working with bricks. You had to use mortar for the glass block installation. Now, there are simple plastic spacers to perfectly align the glass blocks. Short spacers for side to side spacing and a longer space for spacing between rows. No messy wet mortar. You use silicon caulk. When it cures, it is very hard.

The glass block must sit on a solid base, either wood, metal or concrete. After placing the first block, be sure to check that it is level and plumb. Apply some silicon caulk and install the first vertical spacer to the side of the block. Continue this as you place the glass blocks across the row.

To keep the glass block from tilting over, use a special hidden anchor. This anchor inserts into the plastic horizontal spacer and screws into the side frame. This will hold the spacer in place for the next row.

Use these blocks to easily make a great glass block window, glass block shower enclosure, interior green house, or whatever project you can image. Installing glass block is much easier with this new spacer system.

Search Results

Search Results for You

Subscribe

There are several ways to get notified when information is added to the AsktheBuilder web site. Below are descriptions of the various methods. Sign up and you won't miss a single article or video!


Newsletter
I know you will love my weekly newsletter. It will be e-mailed to you when you subscribe and respond to a confirmation email. The newsletters contain the best questions I get each week along with my personal responses. Some are guaranteed to make you laugh, while others will get you out of your chair to inspect something at your home. Enter your name and email address now to sign up for this valuable and informative newsletter.









Your Name:
E-mail Address:


Online Courses
What to learn more about a specific tropic? At your own pace? AsktheBuilder offers over 15 courses. These are sent in a series of e-mails. The online Study Guides are provided 100% free. Check out the Online Courses page for the current list of Self-Directed Learning Experiences.


E-mail Notifications
Tim will let you know whenever a new column or video is added to the AsktheBuilder web site. Sign up for e-mail notification and you will receive a simple e-mail each time Tim publishes a new column or video clip.









Your Name:
E-mail Address:


RSS
With the AsktheBuilder RSS feed service, you receive a signal, through your RSS software, that a new column or video has been added. The RSS page has additional information and links for RSS software.


YouTube Channel
Tim uploads many informative videos to YouTube. You can subscribe to the AsktheBuilder YouTube Channel. Then your YouTube account will show you the recently added videos. Click on YouTube Channel above to join in today.


YouTube RSS
This is a feed of changes in the AsktheBuilder YouTube Channel. Your RSS software will be notified of changes to the AsktheBuilder Channel. Just click on the link to get signed up.


Newspaper Video Contact Form

Syndication Overview The Offer Sample Layout Sample Videos About Tim About AsktheBuilder


To start the discussion, fill out this form:



Name:
Email Address:
What is the name of your publication?
May I please have your direct phone number?
How many videos would you like to start with? 25 Videos

50 Videos

100 Videos

I'll take everyone you have Tim!

Don't Know

Do you want me to send you a License Agreement? You bet! Send it now.

Not yet

Syndication Overview The Offer Sample Layout Sample Videos About Tim About AsktheBuilder

About AsktheBuilder

                        

Syndication Overview The Offer Sample Layout Sample Videos About Tim About AsktheBuilder

AsktheBuilder.com is an extension of the nationally syndicated weekly newspaper column AsktheBuilder written by Tim Carter. AsktheBuilder currently appears in over 100 newspapers nationwide. The AsktheBuilder.com website was launched in December of 1995, twenty-six months after the first AsktheBuilder newspaper column was written. The website archives currently contain over 2,100 articles and hundreds of videos. Residential home building, remodeling and repair topics are the primary focus of all of the content found at the website.

Carter was a hands-on custom-home builder and remodeling contractor for twenty years before launching AsktheBuilder. The concept for AsktheBuilder fermented for many years while Carter built and remodeled homes. Frustrated by bidding against other builders and remodelers who took short cuts using inferior materials or poor building practices, Carter tried to educate homeowners one-on-one. When Carter was selected as one of the top 50 Remodelers in the USA in May, 1993, he recognized the opportunity to speak from a new platform. Now was the time to transform his book idea and speak to many at once. The first AsktheBuilder newspaper column was published in October, 1993 in The Cincinnati Enquirer. The idea for the column was that of Carter's wife, Kathy.

The content found within the AsktheBuilder.com website is derived from an assortment of knowledge bases. The primary source of information is the twenty years of hard-earned lessons Carter  obtained  from  working with a tool belt around his waist. Whenever possible, Carter includes tips he has uncovered from past craftsmen, renowned trade associations, scientists, other builders and even homeowners who take the time to share tips they have learned through trial and error.

New articles and videos are produced each week and loaded soon after completion. AsktheBuilder.com strives to be a portal where do-it-yourselfers and those who wish to hire professionals can learn how to build things that will truly last a lifetime.

Syndication Overview The Offer Sample Layout Sample Videos About Tim About AsktheBuilder