March 17, 2020 AsktheBuilder Emergency Alert

Your life may be turned upside down right now because of the COVID-19 Pandemic.

I've got several things for you. ALL are important.

1. I'm going to INCREASE the frequency of these newsletters to help you with your home as we navigate this crisis. The blasts will be SHORTER and easier to consume. How can I HELP YOU? CLICK or TAP HERE and tell me.

2. I started testing yesterday LIVE YouTube video streaming to help you. I've got one more test to do this afternoon, and then I'm going to start to do one-hour LIVE video streaming sessions where you can send in your question about your home and I will answer it LIVE.

You can even CHAT with me LIVE during these sessions. It's very cool.

The videos will be recorded and you can watch them LATER, if you can't tune in LIVE. If you want me to answer your question, it would help me if you send in a PHOTO(S).

Use my Ask Tim page to do this and say in your question you'd like me to use it for my LIVE YouTube feed. CLICK or TAP HERE now to send in your question and photo(s).

3. Toilet Paper SHORTAGE: You may not have TP. If you're using paper towels, flushable wipes, etc. DO NOT FLUSH THESE down your toilet. You can clog your building drain and it could cost you HUNDREDS of dollars to fix.

WATCH my Flushable Wipes video to understand WHY you should never ever do this!! I tell you at the END OF THE VIDEO how to get rid of the soiled things.

BTW, damp 1/2 sheets of paper towels make for a FANTASTIC TP substitute.
Flushable Wipes Test Video

Finally, HOW can I help you get through this crisis? What are you most worried about with respect to your home?

I want to hear from you. Go to my Ask Tim page and send me a note.

I may reach out to you tomorrow to alert you to the first LIVE YouTube broadcast. If you have your own YouTube account, you can get an INSTANT message that I'm broadcasting live.

First, go to my YouTube channel and SUBSCRIBE. Then in your settings hunt around for how to get NOTIFICATIONS when a new or LIVE video has been posted.

That's enough for today.

It's time we ALL help each other. Did you buy a three-month supply of TP paper? If so, take 15 rolls and go around your neighborhood and give one roll to each neighbor. Believe me, you'll feel FANTASTIC after doing this.

Tim Carter
Founder - www.AsktheBuilder.com
Certified CLEANER - www.StainSolver.com
Emergency Comms 3.539 - www.W3ATB.com

Do It Right, Not Over!

P.S. I'm serious when I say to go out and share some of your TP paper. After all, you don't have food for three months, so what in the world are you going to use it for???????

Deck-Building No-No and Washing Windows

outer deck joist

Deck Building | This outer deck joist is not safe. No structural engineer would ever approve this method. Copyright 2020 Tim Carter

Deck-Building No-No

QUESTION #1: Tim, I need your help. I contracted with a large home center to have a deck built. I came home from work and saw that the carpenters had toenailed an outer joist to the side of my home. Many of the nails are close to the edge and I can already see some splitting of the wood. The deck railing post is connected to this joist and I’m worried about its strength. What’s the right way to make this connection? How would you have done it? Amber T., Memphis, TN

Amber sent me a photograph of the flawed workmanship. It shook me to the core. I also saw serious errors made in how the ledger board was attached to the house and how the flashing was applied.

Several years ago, I attended a one-day workshop put on by the top deck hardware manufacturer in the USA. One of the statistics floated at the workshop was the number of defective decks in the USA. They estimated it to be higher than eighty percent. Deck collapses are in the local news all the time. The Internet is littered with stories of collapses. Just a year ago, it became somewhat personal for me because a friend of my daughter almost died from a deck collapse. She broke her neck and ruptured her spleen.

Here’s an autopsy report on what I saw from Amber’s photo. First, there were two joists at the end of the deck. The first one, no doubt, was nailed into the end grain of the ledger board. This is the weakest of all connections because the holding power of end grain is far lower than the holding power of a fastener installed 90 degrees to the end grain.

The visible nails used were installed by a nail gun. They may have a thin coating of galvanizing on them. Newer treated lumber has a higher copper content and it requires very special fasteners that have a much thicker coating of galvanizing to resist corrosion. When you purchase fasteners, most have an exposure rating on the label. Always purchase ones with the highest level of corrosion resistance.

Toenailing a horizontal beam to a wall is simply unacceptable. The nails shot by the nail gun were probably no longer than 3 inches and when you do the math, maybe just 3/4 of an inch of the nail passed through the outer oriented strand board of the house into who-knows-what.

There are all sorts of approved ways to connect this double joist at the end of the deck. The ledger board could have extended another 6 inches and then a double joist hanger could have supported the two joists. Special structural screws should be used to attach the joist hanger to the ledger, not nails.

The flashing detail is on my AsktheBuilder.com website. Go there and behold the magic discovered over a hundred years ago about fire cuts and how you can employ those to keep water out of your house when you flash up from a deck ledger board, over it, and down the face of it.

Washing Windows

QUESTION #2: Hey Tim, I wonder what you know about washing windows. No matter what I try, the blue liquid, ammonia, paper towels, newspapers, etc. I get streaks. Can you help me? I’m tired of dirty glass and am more frustrated than an inebriated person trying to get a key in a door lock! Terri A., Columbus, OH

I know all about being frustrated by dirty glass and door locks. I also know how to get glass perfectly clean. I used to watch a professional window washer clean the giant plate-glass windows at the chili parlor I worked at in high school and college. However, I didn’t pay close attention to the actual process as I was too busy making cheese coneys.

Years ago, I decided to discover how professionals clean glass, acres of glass. I called the presidents of two of the largest window-washing companies in the USA. These are the companies that clean windows on skyscrapers. The answers from both were identical and I hung up the phone thinking, “There’s no way it can be that simple.

Both men said the secret is to use regular water with a small amount of liquid dish soap in it. You can purchase special window-washing soaps for this purpose if you want. The second-most important thing is to use the correct tool to clean the glass. Pros use a lambs-wool tool that they rub across the glass. This tool is soaked in the water solution and the sweeping motions the pros use gets the dirt off the glass.

The brass squeegee you see the pros use is not a magic tool that’s cleaning the glass. It’s just removing the left-behind water! The pros will also use a rag to wipe any excess water from the edges of the glass. I use this method and my glass here at my house is spotless.

The blue liquid, ammonia, and all those other home-methods are just a waste of time. If they worked, don’t you think you’d see the pros use them? After all, the faster and better they can clean glass the more money they make. There’s a reason you never see a pro use blue liquid and paper towels or rags. It’s laughable when you think about it!

Column 1345

March 15, 2020 AsktheBuilder Newsletter

Are you a new subscriber? Welcome and FAIR WARNING: A tsunami of home improvement tips is about to wash over you.

You may have already been on the beach here with me, lying on the warm sand and hydrating with your liquid of choice, when small waves become big waves. You’ve got enough sense to know it’s now time to seek higher ground. “Run! Hurry, the BIG wave is coming!

Spring Cleaning

Early this past Sunday, you may have switched to Daylight Savings Daze and still may be suffering. Don’t you just hate to make the switch?

This time change heralds but one thing: It’s time to CLEAN THINGS.

The official start to spring is Friday, March 20th. Yes, the vernal equinox is almost upon us. Just look at what my Weather Underground app said two days ago.
Weather Underground

We’re just 12 minutes away from having 12 hours of daylight. This spring I’ve got a monster list of things that need to be cleaned. How about you? I’ll be using Stain Solver on my deck, dock, siding and patio, but not my windows.

When I tackle the windows here at the AsktheBuilder.com world headquarters, I’ll be cleaning them like a pro. What would you say if I told you there’s a good chance you’re cleaning your windows the WRONG way? Don’t be offended, maintain an open mind here.

Years ago, I interviewed the presidents of the two largest window washing companies in the USA. I wanted to see how their employees clean the windows of skyscrapers while dangling in the air, hundreds of feet above the ground.

CLICK or TAP HERE to see what I discovered. Be honest, are you still using that wretched blue liquid and paper towels, or worse yet, newspapers! Hah, can you still find newspapers?

The COVID-19 Virus and You

On Wednesday, I shared very briefly that I was going to add to the fray about the wretched COVID-19 virus. I have no intention of giving you any medical advice. I’m not a doctor nor do I play one on TV or in my videos. I do, however, impersonate a pirate pretty well!
captain tim carter

As I was fixing breakfast this past Wednesday, I thought about you. I thought about how fearful you might be. You may need work done at your home, and you’re wondering if it’s a good idea to have unknown workers come to your house.

You’ve got three simple choices as I see it:

  1. Postpone the work and not have strangers come to your home.
  2. Have strangers come and roll the dice that they’re not infected.
  3. Use my advice and tips and tackle some smaller jobs yourself saving LOTS of MONEY in the meantime. You can also have me call you on the phone to help. See below.

I have a bunch of free guides on my website for you. Here are a few. I found them by just typing “quick start guide” into the search engine at the website:

Grouting Quick Start Guide

Install Laminate Flooring in Hours Quick Start Guide

Painting Kitchen Cabinets Quick Start Guide

I’ve also have some simple and inexpensive DIY guides at my shopping cart for some basic projects. CLICK or TAP HERE to see them.

I’ve decided to create a SPECIAL DEAL for you if you need over-the-phone advice during this uncertain time. Let’s say you need some work done and you don’t know if it can wait or you just need help to get started.

Use the following promo code and get 20% off my 15-Minute Phone Consult Call.

This promo code will expire in just a week. Set up a call now and allow me to put your mind at ease.

TIMCALLME

Be Bold! Do It!

Look at this photo. See the yellow house? You’re looking at the smallest house in Old San Juan, Puerto Rico.
Bold Colors on House

When can you get away with painting your house a BOLD color like that?

CLICK or TAP HERE to see when I’d paint my own home an insane bold color.

Do you want to know the BEST exterior paint to use on your home this year? I thought so. CLICK or TAP HERE to discover the paint that’s on my house.

Do me a huge favor. Tell me if you’ve been bold before OR tell me why you’d never go over to the wild side. Just LEAVE a comment at the bottom of the column. Thanks!

Super Smart Door Locks

I’m about to install and test the following door lock. I love all the features, but I’m not a big fan of making one of my doors look like it’s a hotel room.
smart door lock

I’ll have a full report for you about this very powerful door lock next week.

CLICK or TAP HERE if your door knob is just LOOSE and you want to fix it.

That’s enough for a Sunday, right? Please look at the P.S. below.

Tim Carter
Founder - www.AsktheBuilder.com
BEST Cleaner in the World - www.StainSolver.com
Talk to Invisible People - www.W3ATB.com

Do It Right, Not Over!

P.S. Do you believe in God? A very dear life-long friend of mine needs your prayers today, tonight, and tomorrow (March 16th). I’d be forever in your debt if you could say a few prayers that she has a great day on March 16th. Thank you very much if you’ll do this for her.

March 11, 2020 AsktheBuilder Newsletter

Roof Maxx Review and COV-19 Urgent News

Are you a new subscriber? This is a very brief newsletter. I do this with breaking important announcements.

You may have seen one of these special newsletters before if you're one of my seasoned subscribers. You know how IMPORTANT it is to read the following.

Roof Maxx Review

Over the past month, I've had an explosion of incoming emails and inquiries via the Ask Tim page on my website about a newer company: Roof Maxx.

As soon as my inbox started blowing up, I rolled up my sleeves and got to work. CLICK or TAP HERE to see what I discovered.

Most certainly click or tap if you're thinking of signing a contract with the company!

The Wretched COVID-19 Virus

I know you might be afraid of how the COVID-19 virus is spreading and how it might affect you. Some of the news reports might put your head on a swivel.

On Sunday, I'm devoting a very large portion of the newsletter to this issue and HOW you can survive it when it comes to getting work done around your home. Probably the last thing you need is to get sick from some worker that comes by your home to do a job and infects you and your loved ones, right?

You need some advice on how to weather this storm and I intend to help you through it.

Tim Carter
Founder - www.AsktheBuilder.com
Organic Cleaner - www.StainSolver.com
Morse Magic - www.W3ATB.com

Do It Right, Not Over!

Roof Maxx Review

Roof Maxx® Review

! WARNING !
Before you sign a contract with Roof Maxx™ for THOUSANDS of dollars, you may want to skim over my new PDF Copper Roof Strips Slow the Aging of Asphalt Shingles. CLICK HERE to DOWNLOAD IT.

Or, you MAY WANT TO TALK WITH ME for 15 Minutes. Go here to set up the call.

Chrystal asked me to call her. I shared a different method to protect her roof that is much cheaper than the Roof-Maxx method. At the end of the call, she said, "I appreciate you!! THANK YOU!! You just saved us $15,000!! So happy I came across your page!!" Best, Chrystal

This column was inspired by emails and inquiries from some of my 31,000 subscribers who read my March 11, 2020 AsktheBuilder Newsletter.

This is a virtual review of a product and service sold by a USA company called Roof Maxx®. I say virtual because I’ve not used the product on my roof and even if I did, I don’t possess the scientific experience nor my own certified testing labs to tell you if the product does what the Roof Maxx® company claims that it does. I doubt you have that expertise either.

I can tell you that I wrote an authoritative book, Roofing Ripoff, about asphalt shingles that deteriorate sooner than they should. This short easy-to-read book contains what I know to be the root cause of this deterioration, and a simple low-cost one-time fix that you can do to make sure your asphalt shingles last 30, 40, and possibly 50 years.

CAVEAT: Any of the following information that is not taken from the Roof Maxx® website, literature, or videos invoking the Fair Use doctrine is my opinion. My opinions are based on years of hands-on roofing experience and input from scientists and roofing industry leaders that have shared their experience and knowledge with me.

What is Roof Maxx®?

This question can be answered looking at the text on the Roof Maxx® website current  as of March 10, 2020:

roof maxx review

Copyright 2020 Roof Maxx® 

What is the rejuvenating spray treatment?

Roof Maxx® installers spray on a soybean-based chemical that contains a soy methyl ester emulsion (SMEE). The spray may also contain some sort of cleaning agent because Roof Maxx® claims that the spray cleans algae off roofs as part of the application.

How Long Does the Treatment Last?

Roof Maxx® is only willing to offer a five-year warranty. Look closely at the warranty language as no doubt it’s prorated. The more important consideration is, how can you make a valid claim that the product has failed and your roof is in worse shape than just after the spray was applied?

How Much Does Roof Maxx® Cost?

The video on their website as of March 10, 2020, says that the cost of the treatment is approximately 20 percent of the cost of replacing your shingle roof with new shingles. In other words, it’s an expensive product to apply. The average cost could be around $2,000 - $2,400.

How Does Roof Maxx® Work?

The Roof Maxx® company states that the patented SMEE solution replaces lost oils in the shingles, restoring their flexibility and waterproofing capability.  Here’s exactly what Roof Maxx® says about how their product works.

roof maxx

Copyright 2020 Roof Maxx

In the Roof Maxx® PBS Mini Documentary video on the Roof Maxx® website, the narrator says:

“When installed, roof shingles have essential oil in the asphalt that allows for daily expansion and contraction. And as they age, the oil begins to dry out causing the asphalt to become brittle and crack.”

Are My Asphalt Shingles Falling Apart Because They’re Losing Oil?

In my opinion, the primary reason your shingles are falling apart is because the asphalt used to make them is not as high quality as it could have been. While there could be some oil loss, any older roofer can tell you that asphalt shingles made in the 1960s and 1970s would last for decades.

If oil loss was the primary reason for failure, then all those shingles all those years ago would have exhibited brittleness or cracking in 7-10 years. The truth is they didn’t. I offer up proof of this in my Roofing Ripoff book.

I was fortunate to have a deep-throat source for my Roofing Ripoff expose’ book. This person grew up in the asphalt shingle manufacturing business. He was also a prominent and well-known leader within the asphalt roofing industry.

He reached out to me after reading a column of mine in the Washington Post where I lamented about my failed asphalt shingle roof. I shared in that column how the Asphalt Roofing Manufacturers Association rebuked my request for answers to probing questions about why asphalt shingles were failing all across the USA.

Asphalt roofing shingles are falling apart much faster than they used to because many of the manufacturers are pre-aging the asphalt used to make the shingles. They’re blowing too much air into the asphalt before it’s applied to the mat that makes the shingles. I cover this in great detail in my Roofing Ripoff  book.

Some air is required to be blown into asphalt so it doesn’t liquify and flow off your roof on a hot summer day. But blowing too much air into the asphalt starts to make it brittle where it loses its ability to hold on tightly to the colored ceramic granules and retain its flexibility

This extra oxygen causes too many asphalt molecules to cross-link to one another and the resulting asphalt shingles are then prone to being brittle even before they’re applied to a roof. The proof of this lies in the fact that many new asphalt shingle roofs experience granule loss in the months after the roof is applied. The granule loss continues to happen until such time as the roof needs to be replaced. 

The protective ceramic granules start to pop off because of the asphalt’s brittle surface, causing more asphalt to be exposed to the sun’s harmful ultraviolet (UV) light. About five percent of UV light contains active photons and these powerful particles blast apart asphalt molecules exposing them to additional oxidation. The additional oxidation causes the shingles to become even more brittle.

When you open most new packs of asphalt shingles, you probably assume they’re new.  The issue is that while they are new, they start to perform as if they’ve already been on your roof for 15, 20, or 25 years.

Is it Possible for the Roof Maxx® Soybean Solution to Penetrate Through the Ceramic-Coated Solid-Rock Granules That Cover My Asphalt Shingles?

My college degree is in geology, the study of rocks. The granules on your asphalt shingles are made from rock and then a thin ceramic coating is applied.

A ceramic coating is actually a thin layer of glass. Common sense would dictate that it would be seemingly impossible for any solution to penetrate through glass into the rock and then escape through the underside of the glass-coated granule to eventually get to the asphalt under the colored granules.

The Roof Maxx® company sent me a document where they maintain it can penetrate through glass. Here’s what was said in the document:

When Roof Maxx® is sprayed on an aging asphalt-shingle roof, the treatment penetrates through the granules and is absorbed into the asphalt layer.

I suspect what’s actually happening is the soybean product is actually passing around the granules and being absorbed into the asphalt that way.

Is There Another Method to Slow Down the Deterioration of the Shingles?

Yes. There’s not only another way to achieve the goal that Roof Maxx® is striving for, but it’s also much much cheaper and you only have to do it one time, not every five years as the Roof Maxx® company suggests.

What is the Alternative Method?

All you need to do is place a wide piece of thin copper at the top of each plane of shingles on your roof. You can apply the copper to a new roof or an existing shingle roof that is not yet showing signs of advanced deterioration like curled edges and large spots where many granules are missing.

copper roof strip

I was the first person in the world to identify that copper prevents the oxidation of asphalt molecules on asphalt shingles. See how easy it is to install this copper in a new-roof installation? CLICK the photo or TAP HERE to order the copper strips. After a few months exposure to the elements, the bright copper dulls down to a nut-brown color.

Each time it rains, a small amount of copper washes onto the shingles. Some of the copper ions attach to the asphalt molecules that have been broken by the UV sunlight. When the copper bonds to the asphalt it prevents the cross-linking of the asphalt molecules that happens under normal oxidation.

Remember, the more asphalt molecules that cross-link, the more brittle the shingles become. The copper chemical reaction slows this cross-linking allowing your shingles to age very slowly.

The advantage of the copper method is that it’s a one-time fix.

You put it on and forget about it. You’ll never have to do anything again as long as you own your home. When you consider that you might be saving yourself from having to get a new roof, the copper method is a reasonably priced fix. You can purchase enough copper for the average roof for less than $400.00 in 2020 dollars.

I was the first person in the world to discover this beneficial chemical reaction between copper and asphalt. It happened completely by chance one day as I walked out of a restaurant in Tilton, NH and saw the roof on the old Tilton, NH post office. That photo is in my Roofing Ripoff expose’ book

Tilton Post Office

Look at how the 8-foot-wide strip of asphalt shingles look nearly perfect. This is the roof of the old Tilton,NH post office. The other shingles on either side have lost their granules and are curled as can be. The copper ions washing off the cupola roof STOP the oxidation of the asphalt. When asphalt oxidizes, the molecules cross link and become brittle. CLICK THE PHOTO NOW TO ORDER AFFORDABLE COPPER STRIPS THAT WILL SAVE YOUR ROOF.

copper roof strips

This photo tells you all you need to know about how copper slows down the oxidation of asphalt shingles. Look at how bad the shingles are that don't get copper ions washing over them.

Did the Roof Maxx® Company contact you to Review their Product?

Yes. On Friday, February 14, 2020, Bobby Wright, who represents Roof Maxx®, sent me a message via the Ask Tim page on my AsktheBuilder.com website. He wrote:

I'm hoping to have a live conversation with you in regards to a new product called Roof Maxx. I'm even interested in performing a free demonstration for you to get your feedback. Please contact me at (614) XXX-XXXX to discuss. I am a follower of your work and appreciate all you do for the consumer world. It would be an honor to be associated with you.”

Bobby also attached a fancy full-color document produced by the Ohio State College of Food, Agricultural, and Environmental Sciences about SMEEs.

I responded within minutes asking him when he’d be coming to New Hampshire as I imagined he thought I still lived down the road in Cincinnati, Ohio. I then recommended to him that he read my Roofing Ripoff book because I felt that his company was not fully aware of the root cause of shingle failure. They maintain it’s caused by oil loss. My research and the information from my deep-throat source say it’s caused by blowing too much air into the asphalt.

I suggested that he purchase a copy of the book, read it, send it to the scientists at Battelle Labs who developed the Roof Maxx® soy product, and then get back with me with his comments.

I heard nothing back from Bobby and at 8:38 a.m. on March 9, 2020, I sent a follow-up email to continue our conversation. Bobby didn’t respond. I then called Bobby’s direct phone number at 3:43 p.m. on March 9th, 2020. I left a message on Bobby’s voicemail. I asked him what the scientists at Battelle Labs had to say and if there was any input or response from the Roof Maxx® CEO, Mike Feazel.

I called once more on the morning of March 10, 2020, at 9:56 a.m. At 4:16 p.m. on March 10, 2020, I received a lengthy email response from the Roof Maxx® CEO, Mike Feazel. The key points were that the Battelle Labs scientists don’t dispute my approach or claims as to the root cause of shingle failure and the proven performance of copper as a way to slow down the deterioration of asphalt shingles. 

He further went on to say, “However, I think we can agree that we're both attempting to help property owners achieve the same goal; Protect their investment and save money while keeping debris out of landfills.

Mike concluded that he has no desire to take on the asphalt shingle manufacturers head-on and that, “I simply want to give property owners an option that wasn't otherwise available until now.”

What Questions Should I Ask the Roof Maxx® Salesman that Comes to My Home?

Here’s a list of questions I would ask a salesman before I’d sign a contract with a Roof Maxx® dealer:

Have you read syndicated columnist Tim Carter’s Roofing Ripoff book where he discusses what he believes to be the real root cause of asphalt shingle failure and his alternative approach to using copper rather than your product?

A vast percentage of my roof is covered with ceramic granules that act as a sunscreen to prevent UV damage. I don’t see any exposed asphalt when I look closely at a shingle. Does the soybean oil emulsion penetrate these granules? If so, how is it possible for them to get through glass? If not, then how does the soybean oil get to the asphalt underneath these granules?

How do I know if the Roof Maxx® product is working? Please give precise information how to determine this.

What is the evidence that the Roof Maxx® product is not working? If I continue to see ceramic granule loss, is that a symptom that the Roof Maxx® spray coating is not doing its job?

Is the Roof Maxx® warranty prorated?

How can I prove that the Roof Maxx® product didn’t work so I can file a warranty claim?

What documentation must I provide to make a valid claim?

Tim, What’s Your Final Opinion of Roof Maxx®?

My opinion is that the Roof Maxx® soybean solution is backed by solid science. The Battelle Labs in Columbus, Ohio, have a deep and rich pedigree.

I feel the biggest drawback with Roof Maxx® is that you must re-apply the product every few years to try to keep your roof in good shape. Whereas if you install the affordable copper strips on your roof, you never have to do anything again.

I also feel the photograph taken those few years ago at the Tilton Post Office is all the proof you need to know that copper is the best way to go. To the best of my knowledge, there are no side-by-side photos of a house roof where one half has had the Roof Maxx® treatment while the other half hasn’t. If that test had been done for 5, 10, or 15 years, then you might have full confidence that the Roof Maxx® soybean solution does indeed do what the company claims.

In my opinion, at present you can only hope the Roof Maxx®  product will work. I recommend that you only hope for things that you can’t control like the weather, who’s going to win the World Series this year, and if your lottery ticket is going to be a winner.

You can absolutely slow down the deterioration of your asphalt roof by installing copper strips and know that they are working.

P.S. If you hang your hat on acid rain being part of the equation, you probably should leave your hat on your head. Look here:

acid rain decrease

Image and data courtesy of the National Atmospheric Deposition Survey, Illinois State Water Survey - Images and text retrieved using the Fair Use Doctrine from: http://www.earthtimes.org/pollution/acid-rainfall-decrease/1636/

Painting Houses Bold Colors and Other Tips

Bold Colors on House

Do you have the intestinal fortitude to paint your home either of these two bold colors? Click here to read the March 15, 2020 Newsletter and find out where this house is located. Copyright 2020 Tim Carter

DEAR TIM: This summer I need to paint my house. I need your sage advice about a number of things. First and foremost is the color choice. My husband and I are involved in a daily cage fight about the color. I want to go bold. He wants a plain-vanilla color. We have no intentions of moving if that matters. What paint would you recommend we use? What are a few of the best practices when painting the exterior of a home? Thanks for refereeing the bout in our make-believe octagon! I’m interested in who you think will win the bout. Marilyn S., Pleasant Prairie, WI

You might be about to paint your home this season. I’m not in that group because ten years ago I painted my house and it looks as good as the day I painted it. How’s that possible? I’ll share that secret and many more in a few moments.

All too often my King Solomon skills are called upon to intercede in marital home-improvement squabbles. You should see the messages I get via my Ask Tim page at my AsktheBuilder.com website each week. Oh my!

Marilyn provided a very important fact that makes my decision about the color choice quite simple. She said she’s got no intention of moving.

I’m going to go off-topic for just a moment. About four years ago, I discovered the true path to inner happiness. I connected a few dots about observations I made when out hiking and doing outdoor amateur radio with my best friend here in New Hampshire. He’d ignore me when I brought up topics that didn’t interest him or agitated him. I had always marveled at him being the happiest person I’d ever met. Now I know why. He actively kicked any negativity in his life to the curb. Do that and happiness will flow over you all day like a giant waterfall.

With that said, if painting your home a bold color makes you happy, then by gosh do it! It’s your home. Make a statement. Be fearless like the property owners in Old San Juan, Puerto Rico for goodness sake! Become a trendsetter in your neighborhood.

Before you commit to the final color, do a test panel on a large enough part of the house so you can really see what the color will be like. Paint at least 100 or 200-square feet of surface area, not some tiny patch. Look at the color for a week at different times of day. Stand back at the street or at a distance to view it, not just five feet away. Get a real feel for the bold color.

Let’s discuss the paint to use. Years ago, I attended an editors conference where a new urethane-resin paint was introduced to the marketplace. Urethane is sticky. You know this if you’ve ever applied it to wood floors. It grabs and won’t let go. Did you know that paint is just colored glue? Yes, that’s all it is in its most basic form.

You want to paint the outside of your home with the stickiest paint you can buy. About twenty years ago, I painted the last home I built with this paint. I drove past it just a few months ago and it looks exactly like the day I applied the paint. The paint color was still rich and I couldn’t see one place where it had peeled or blistered.

Let’s imagine you need to go out to dinner and you’ve been working outside all day doing gardening in the hot sun. You’re filthy dirty, you’re sweaty, and just plain gross. There’s no way you’d ever just come inside and change clothes to go out. You’d take a great shower first and get clean before putting on your fresh going-out-to-dinner duds.

You need to do the same with the outside of your home. But be careful. Don’t fall into the pressure-washing trap. I worry that you feel pressure washers are the best way to clean the outside of your home. In my opinion, they fall way short of that mark and you can prove it easily.

Is your car really dirty? Good. Go to a local car wash where you can use a pressure-washing wand to apply soap and then rinse your car. Use the pressure washer on your car as you might do it on your house. Keep in mind that if you get the tip of the wand too close to the surface of your home, you can damage it. So keep the tip back away from the car paint about 10, or more, inches.

Pull your car out of the wash bay, park somewhere nearby and allow the car to air dry. Then take your finger over the dirtiest part of the car and wipe it with a clean damp paper towel. I guarantee you the paper towel will take more dirt off your car. Case closed. Wash your house like you used to wash your car. Use a soapy solution and a big brush RV owners use to wash their big rigs.

Apply the new paint in the shade, not direct sunlight. By all means, read the label on the paint can and follow all the directions to the letter! Do these things and you’re going to be one happy homeowner. And the match goes to Marilyn! (Crowd cheers!)

Column 1344

March 8, 2020 AsktheBuilder Newsletter

Is this your first newsletter from me? What you're about to see is as rare as rain in the Atacama Desert. Don't unsubscribe until next Sunday. Give me another chance to scratch your home-improvement itch.

You may remember an issue like this if you've received scads of my newsletters. Yes, it's time to grab a tissue. Maybe two.

Dick Christopher - A True Saint

This past Friday afternoon I attended the visitation of a very good friend of mine, Dick Christopher. It was somber as they often are and as I walked down the steps the wave of melancholy started to wash over me.

I had suppressed my emotions all week because I'd been working at a fever pitch the previous fourteen days on a secret project, and then this past Tuesday, I woke up at 2:45 a.m. to fly to Puerto Rico returning just 48 hours later.

I know, everyone's got a sob story.

When I woke up after the visitation, I was trying to stay afloat in the swirling emotional waters created by the tsunami of Dick's passing.

I feel you must read about Dick, see him, and most importantly listen to his voice. It's impossible for me to do all that in the format of this newsletter.

Please CLICK OR TAP HERE and I guarantee you, in fact I SWEAR TO YOU, that you'll walk away with at least one very important life lesson.

I'll be back here next Sunday with a near-normal AsktheBuilder.com newsletter.

73, Dick!

73 is a number radio operators say to one another at the end of a conversation to convey warm thoughts or "best regards".

Tim Carter
Founder - www.AsktheBuilder.com
Best CLEANER IN THE WORLD: www.StainSolver.com
73 to you Dick - www.W3ATB.com

Do It Right, Not Over!

P.S. Dick Christopher had a profound impact on my life and even though you never met him, you'll see and hear him by CLICKING or TAPPING HERE. I promise you that your life will be forever changed for the better.

Richard P Christopher N1LT

Richard P. Christopher N1LT

Dick Christopher was a good friend of mine. He was sent back to Heaven on February 23, 2020. I met Dick in the late summer of 2011 when I re-immersed myself into the world of amateur radio. It turns out Dick was the founder of the Central New Hampshire Amateur Radio Club (CNHARC). He welcomed me with open arms to the first meeting I attended in July of 2011.

Richard P Christopher

Dick is on the left and our mutual friend Jim Cluett is on the right. Location: Flume Gorge State Park, NH RIP Dick!

The morning I discovered Dick was no longer with us, I was overcome with a feeling of sadness. I found myself wishing I had spent more time with him or had even called to reminisce about great past times. (Read more about this amazing person in the March 8, 2020 Newsletter.)

That sadness only increased several days later when another radio buddy sent me a link to Dick’s online obituary. Here it is:

https://www.currentobituary.com/obit/241131

I’ve made my living the past twenty-three years creating those strings of characters. They’re called URLs. I pay attention to them and was aghast to see that Dick was now reduced to a sterile number at the end of a URL. It’s so easy to put his name there in front of the unique number, but alas the webmaster thought otherwise. Look now up at the top of your browser to see how easy it is to put his name in the URL.

Dick was more than number 241131. Much much more.

My anguish deepened as I read his obituary. It included a brief description of Dick’s work and his interests, but it failed to capture who Dick Christopher was. 

I decided that Dick deserved better. You need to know the Dick Christopher who I knew and came to appreciate.

Still Waters

Dick was quiet and reserved, like a remote woodland pond on a wind-free day but his understanding of what was going on and how things worked was as deep as the ocean. 

If you asked Dick a question, he almost always had the answer. When you did stump him, he knew where to send you for the answer. He never made you feel inferior because of your lack of knowledge. He must have been a fantastic mentor when he taught high school physics and math. Dick was smart but he never needed to boast or make anyone feel inferior.

A Tough Negotiator

One of my fondest memories of Dick was early in our relationship. He fostered countless people who wanted to immerse themselves in amateur radio. Within a month of meeting me, he could tell my appetite for all things radio was bigger than the Goodyear Blimp.

Dick knew that the real fun and satisfaction in amateur radio happens on the high-frequency bands. To play radio here, you need a class of license that I didn’t have. My license at that time only granted me only the lowest level of radio privileges.

A few months after meeting Dick, he called me. The call was extremely brief and to the point, but that was Dick’s personality. He was never a chatterbox on the phone or in person.

“Tim, it’s time for you to upgrade your license.”

“Oh, Dick, yes, I plan to do that soon.”

“I don’t think you understand me. I mean it’s time right now, in the next two weeks, to upgrade your license.” Dick’s voice was monotone but firm.

“Well, I want to understand all that’s involved and I’ve been studying the big book with all the information and questions. I think I’ll be ready to take the test in a few months.”

“No. You’re going to take the test, pass it, and once you have the new privileges you’ll learn much faster than by reading that book. Tell me now if you’re going to be at the test session before the next club meeting in two weeks.”

He was serious. The question pool for that exam has hundreds of questions. Many are quite technical. I was stammering and gulping because I knew he wasn’t going to hang up until I committed to being at the testing session.

“Okay, I’ll be there.”

“Good. Bring $15 and a copy of your current license.” And with that Dick hung up the phone.

I started to use an online study aid. I sat for the exam. You needed to get 27 of 35 questions correct to pass. I got 33 out of 35 and completed the test in about 20 minutes if memory serves me right. As you might imagine, Dick seemed even happier than I was that I had passed and was now a new General-class amateur radio operator.

Dick was right about high-frequency bands. The real fun of amateur radio happens when you can communicate with others thousands of miles away using a tiny box about the size of a paperback book and a thin wire dangling from a tree.

One day Dick and I went with a shared friend, Jim Cluett, to Cannon Mountain to operate outdoors on a late summer day. There are some splendid photos and quotes of Dick’s in this story. I recommend you read it.

Field Day

One event that Dick really loved was the annual Field Day that thousands of radio operators take part in all across the USA. It’s a 24-hour exercise where you’re encouraged to simulate an emergency of sorts and get on the radio outdoors if at all possible. You’re testing your capability to continue to operate using batteries or a portable generator while, dealing with bugs, the sun, wind, visitors, and storms. It’s more of a challenge than you may think.

Here's a video of Dick talking about Field Day.

Here's the video Dick was talking about when he was younger with the bushy hair:

As the founder of the CNHARC, Dick helped organize Field Day for years. He shared stories of past Field Days decades ago when many club members participated and were active the full 24 hours. It’s hard to say whether Dick loved radio or gardening more.

Giant Tomatoes

Dick was a master gardener. He had an amazing array of raised beds where he grew vegetables that could win the blue ribbon at one of the many late summer or fall fairs here in New Hampshire.

When I’d visit Dick in mid-summer, he’d take enormous pride in showing me all of his plants. He was happy to answer all of my questions. I happen to be a horrible gardener and marveled at Dick’s green thumb. He made it look so easy, yet I knew he devoted countless hours of work to cultivate and care for all those wonderful plants.

Sailing

Dick was an avid sailor and loved spending time on the water. He was a member of the prestigious Winnipesaukee Yacht Club and he owned a very nice 25-foot sailboat.

I was fortunate to be invited to sail with Dick at least twice. Both times our mutual friend, Jim Cluett, came along.

One thing that always amused me was Dick’s distaste of spiders. When you rowed out in the dinghy to get to the sailboat, you had to deal with the fabric weather covers that protect the cockpit from the elements.

Dick always asked Jim or me to peel back the covers and whisk any spiders we saw into the water. I did as requested and never said a word because I knew that if there were serpents in the sailboat, I’d never get out of the dinghy.

Priceless Interviews

Do you want to come to know and respect the Dick Christopher I knew? I hope so.

I’ll never regret investing the time it took to create these short video interviews with Dick. What a treasure it is to be able to see and hear him! Maybe they’ll inspire you to record a 60-Minutes style video of a person in your life who you want to be able to remember in “real-time”.

Dick Christopher was that person for me. 

Magic Wall-Hung Fancy Sink

Magic Wall-Hung Fancy Sink

Wall Hung Sink Bracket | This heavy antique fancy sink seems to be suspended in midair! There are two massive brackets bolted to the studs that come out at right angles under the sink to support it.  It's harder to install an undermount sink than a wall-hung sink in my opinion.(C) Copyright 2020 Tim Carter

Wall-Hung Sink Bracket - Thick Steel Required

DEAR TIM: I need your help solving a perplexing conundrum. I love all things old and have purchased a salvaged antique marble stone corner sink that I want to use as a powder-room lavatory. It already has a drain hole, so that’s not the issue. The faucet needs to be in the wall and I can handle that as well. My problem is I want the sink to appear as if it’s floating in the air with no visible means of support. The sink is really heavy, as it weighs close to seventy pounds. What can be done to achieve my goal and what other tips do you have to make sure this goes well? Are there any hidden problems you might know of I need to avoid? Sharon F., Key Largo, FL

Where Can You Find Antique Sinks?

You find antique sinks at salvage businesses that recover them from buildings that are scheduled for demolition.

Years ago I used to purchase quite a few salvaged building materials for some of my projects. I was so lucky to have a specialty business near me that foraged for one-of-a-kind building fixtures, doors, mantles, sinks, etc. in buildings slated for demolition. They had so many things you simply couldn’t believe it. One day I found a stunning solid-walnut fireplace mantle I incorporated into the last home I built for my family.

Is it Hard to Install an Antique Sink?

Installing an antique sink shouldn’t be a problem at all. I’ve been a master plumber since age 29, and I’ve had the good fortune to install one or two in my career. When deciding to purchase one, you usually just have to make sure the holes for the drain and faucet will work with modern parts. Even if a hole is too small, it can usually be enlarged with minimal effort.

Should I Test Fit the Sink?

The other thing you need to do is to be sure the sink is going to fit really well in the space where it will end up. Recently I had to install an antique sink corner sink in my daughter’s new home. I uncrated it to inspect it and to create a template because I wanted to see if the sink itself was square and would fit nicely in the corner of her powder room.

wall hung sink bracket

It's impossible to see the wall-hung sink brackets as they're covered by the cardboard sink template. The red lines indicate where the thick steel is bolted to the wall studs. The yellow lines indicate where the flat steel plate extends out to support the sink. The ends of the flat plates were almost touching in my installation.

Guess what? The old sink was about 1.5 inches out of square in just 30 inches! That’s a huge discrepancy. A rookie might have assumed the sink was square and been in for a surprise once the sink was lifted in place. I made a template of the sink using scrap cardboard and then padded out the wall studs to account for the out-of-square sink. After the drywall was installed the sink fit perfectly. All I had to do was squirt a small amount of caulking to seal the gap between the sink and the wall.

CLICK or TAP HERE to get FREE BIDS from local plumbers who can install wall-hung sink brackets.

How Do You Make a Sink Appear to Float in Space?

You use special L-shaped wall-hung sink brackets made from thick plate steel to support the sink right under its base. You can also use french cleats.

My daughter wanted the sink to float on the wall just like Sharon does. I was able to locate a company online that sold these very heavy steel wall-hung sink brackets that screw to the sides of wall studs. A 1/4-inch-thick steel plate extends out into the room that the sink can rest upon.

How Many Wall-Hung Sink Brackets Did You Need?

I had to install two of these, one extending out from each wall in the corner. The challenge was to make sure the brackets didn’t block the drain hole, didn’t extend too far out so as to be seen, and finally so they didn’t touch one another. Believe me, this exercise took some planning!

Do I Have to Alter the Wall Framing?

If you do have a conflict where the brackets don’t fit perfectly, you may have to install an extra wall stud, move one, or cut off a small amount of one bracket to resolve the issue. In all cases, you’ll be able to figure it out. Realize the 1/4-inch thickness of the steel plate is a non-issue. Even sitting on the toilet looking at the sink, you can’t really see the steel and you wonder how in the world the sink is not crashing to the ground.

Should I Seal a Marble or Stone Sink?

Before the sink is installed, I highly recommend that you apply multiple coats of the best clear stone sealer you can purchase. Local businesses that fabricate granite and stone countertops sell this product.

You need to seal the stone before anyone touches the sink because the plumber’s putty, caulk, etc. may have ingredients that can soak into the stone and permanently discolor it. After all this hard work, it would be a shame for that to happen.

What Surfaces Should be Sealed?

When sealing the sink, seal all surfaces. Seal the top, the basin, the inside of all drilled holes, and even the underside and back surfaces. Follow the instructions on the sealer label to see how to apply multiple coats of sealer. You’ll never regret taking the time to do this. Remember, workmen almost always have dirty hands and your sink may be one-of-a-kind. It’s not like you can go to the home center and get a replacement after all.

How Many Coats of Paint on the Brackets?

Be sure the steel brackets have been painted several times so there’s no chance the steel can rust. You don’t want rust stains bleeding through the natural stone.

Should I Do a Test Fit?

Before you set the sink on the brackets, do a dry fit. Carefully place the sink to ensure it fits, it’s level and all is well. Once you’re satisfied, then you can squirt adhesive from a caulk tube onto the steel brackets and maybe a little bit on the back surfaces of the sink where it contacts the wall.

Place the sink on the brackets, slide it against the wall, and put a sign on it DO NOT TOUCH so no one touches the sink until the adhesive dries. You’ll love your new sink, and I’d love for you to send me a photo of the finished installation!

Column 1343

February 29, 2020 AsktheBuilder Newsletter

Listen. This could be your first real newsletter from me. I want you to know right now it's NOT a normal one. Well, as you'll come to discover many aren't normal, hah! This issue is focused on sharing with you that my annual Treasure Hunt game is going to end in just a few hours.

You may have plundered one, or more islands with me looking for loot in the past. Remember that treasure chest we dug up that had the medium-blue sapphires in it? My gosh did they sparkle! Well, you know what's in store, so follow my instructions below to the letter.

LAST CALL

Treasure Hunt Ends 2/29/2020 at Midnight TONIGHT

Listen, you landlubbers, my annual Treasure Hunt game is about to end!

It's ending in just HOURS!!! You need to PLAY NOW.

You might be one of the winners of a $50 Amazon Gift Card! It's so easy to enter. CLICK or TAP the treasure map just below! Once there, click the links and answer the questions to be entered to WIN one of the gift cards.

Annual Treasure Hunt

CLICK or TAP HERE now to:

1. Watch a damn funny video of me wearing a large gold hoop earring
2. Listen to me use no less than three different accents
3. See STUNNING photos of house interiors that will WOW you
4. Answer dopey questions that will have you question my sanity

Seriously, my annual Treasure Hunt is lots of fun. TRY IT NOW.

Retaining Wall #FAIL

Please point your peepers to this photo:

Retaining Wall tiny - failed

Do you see what's wrong in the above photo?

Do you think you know what caused the problem?

What would you do to avoid the issue?

CLICK or TAP HERE to see my autopsy report.

DIY Tile Installation

Please peer at this fine photo:

large format wall tile

What's going on here?

How big are those slabs of stone?

Can you achieve professional results like this?

My answers might surprise you!

CLICK or TAP HERE now to discover the answers to your wildest questions about this photo. There are prizes waiting for you!

Remember, GO PLAY the Treasure Hunt Game NOW to have a chance at one of the $50 Amazon Gift Cards!

You'll see me back here in eight days. I'll be flying to Puerto Rico on Tuesday and coming back the next day. I promise not to get sunburned.

Tim Carter
Founder - www.AsktheBuilder.com
GET ORGANIC - www.StainSolver.com
Cool Waves - www.W3ATB.com

Do It Right, Not Over!

P.S. Does your chimney have the right cap on it? Some call it a crown. You'd call it that if you were a dentist, no doubt. CLICK or TAP HERE now to save yourself about $2,000 in repairs. When you get to that page, there are MULTIPLE chimney prizes for you. Scroll down to SEE ALL OF THEM.