Move a Support Post

support column

Move a Support Post | Some support columns are easy to move. Others are so hard it makes your brain hurt to think all that needs to be done. Copyright 2020 Tim Carter

QUESTION: Yo, Tim. I have this load-bearing post right in front of my laundry room door. What can a person do to remove or relocate it to a more convenient location? Is this something that a reasonably handy homeowner with a decent array of tools can do by himself? Can you share all that’s involved? Do you have a clue how this column ended up in such an inconvenient location? Is there a way to have fewer support columns in basements and crawlspaces? Andrew Van W., Spokane, WA

I sure hope you’re able to see the photo (above) that Andrew sent to me. Oh my! It’s a great example of how not to think ahead. Not knowing all the facts, I speculate the architect or draftsperson had no idea that the basement might be finished at a later date.

Related Links:

Support Post and Beam Construction Tips

Residential Steel I-Beams

If Andrew could jump into a time machine, I’m quite sure he would have tried to put the staircase so the side of the one stringer was just an inch away from the side of the column, or he would have had the structural engineer come up with a different support plan so the column would have been out of the way. It’s even possible to have no support columns at all. Watch this video!

How Do You Install a Support Post?

Let’s discuss how these posts or columns are installed in a typical home and then you’ll start to appreciate what’s involved in moving one. First and foremost, there should be a footing pad at least 2-feet by 2-feet by 8 inches thick under the post or column. This distributes the weight bearing down on the post over a greater area.

concrete footing pad

The red arrows point to two of the five support post/column footings.

Without this footing, the column could poke into the soil like you might put a toothpick into a juicy watermelon ball or piece of cheese. You don’t want support columns sinking into the soil for goodness sake.

Should a Support Post be Bolted to the Footing?

Many structural engineers require the support post to be bolted to this footing. You can imagine how hard it would be to remove these bolts if the base of the support column is surrounded by poured concrete. Yes, I know you can cut off the column at the floor level, but this might not be possible.

The top of the support column should also be bolted to the beam that rests on top of the post. These bolts are somewhat easier to deal with and removing them is rarely a challenge.

What is the Biggest Issue Moving a Support Post?

The biggest issue is the overall structural design. Assuming the support beam was designed by a structural engineer or an architect with enough experience to know the correct beam size and column spacing, support posts and columns are in precise pre-determined locations. You can’t just remove a column and move it several feet one way or another hoping everything is going to work out.

What About Concentrated Loads?

It’s possible there’s an enormous concentrated load directly above the support column. I had this in the last home I built for my family. I had an interior bearing wall next to my family room that had a header support post that carried the weight of a second-story exterior wall, part of the attic floor, half the weight of a first-floor roof, and a major portion of the main house roof. I can’t begin to think of how many tons of weight are concentrated on this one post!

DIY Support Post Relocation

The truthful answer is, “Yes, a reasonably handy homeowner with a decent array of tools can’t do this job by himself.” I say this knowing there are some very clever, determined, and resourceful homeowners out there. You may be one.

I temper my answer with this caveat, though. The first thing you must do is hire a residential structural engineer. Have this professional visit your home, survey the job, and develop a small written plan for you to follow. Be sure the plan contains the mission-critical steps of how to temporarily re-support the beam while you do the work.

CLICK or TAP HERE to get FREE BIDS from local structural engineers.

How Can I Have Fewer Support Posts?

All of the misery and expense you’re about to suffer through could have been avoided when the house was built. You actually could have had no support columns or fewer of them.

The common steel beam that is often installed in homes and crawlspaces is an 8 x 17 I-beam. This means it’s 8 inches tall and it weighs 17 pounds per lineal foot. In most homes, this beam requires support about every 8 feet.

Residential Steel Beams

Residential steel beam - There are quite a few in a home I built in Amberley Village, Ohio. The beams are 10 inches tall and weigh 31 pounds per linear foot. You can span up to 14 feet with these! © 2018 Tim Carter

Do Steel Beams Come in Different Sizes?

Understand that steel i-beams come in many sizes just like shoes, pants, and shirts. A beam weighing more pounds per foot might have allowed for greater column spacing. A taller and heavier beam like the ones I put in my last house would have allowed you to span 14 feet. I installed 10 x 31 I-beams in my last house.

Amazing wooden floor trusses could have been used in the house. These require no support beams beneath them. They just span all the way across the depth of the house. These are in my daughter’s new home. Here are her floor trusses:

Not only do you not need beams under them, but the HVAC man, the plumber, and the electrician are going to be jumping for joy!The trusses make their jobs go faster and you save money in the long run.

Column 1378

November 1, 2020 AsktheBuilder Newsletter

You subscribed at a great time! This is where I welcome all new subscribers. Thanks for your trust. This issue is chock full of amazing product links. Be sure to CLICK or TAP each photo you see!

You, though, might be a subscriber who’s received countless issues. Did you know that I save them all, just like my miniature 6-inch by 6-inch travel chess set from when I was a teenager? So, if you need to see any past newsletter CLICK or TAP HERE.

CLICK or TAP HERE to see more crazy photos of my cherished wood-inlay travel chess set. Wait until you see the underside. These make great affordable Christmas gifts.

travel chess set

Two Seasons in One

Check out this photo I shot two days ago. Mother Nature teased us here in central New Hampshire with our first measurable snow of the season. CLICK or TAP HERE to see a high-resolution photo and to be able to comment on her handiwork.
snow on colored tree leaves

Richard P. Anderson

This issue of the newsletter is dedicated to my best friend in Cincinnati, OH - Richard P. Anderson. Unfortunately, he’s not going to be able to read this. I should have done this a month, or two, or three ago. CLICK or TAP HERE to discover more about Richard. You better have a Kleenex or two handy.

“Tim, Are You Okay?”

Not a week goes by that I don’t get an email like the one I got from Joe overnight. Here’s what he sent:

Dear Tim, I've been a follower of yours for some time but I haven't received any of your newsletters for a few weeks now. I hope all is well with you. Joe - Syracuse, NY

I'm always touched by these emails because you care about me. Thanks so much for that.

I’ve been sending out a newsletter regularly - sometimes more than one a week - for years. Why did Joe, and possibly you, stop getting them? The reasons are many.

If you want to make sure my newsletter ends up in your Inbox each week, please do the following:

  1. Whitelist [email protected] - add me to your email CONTACTS
  2. Open each issue - don’t look at it in the PREVIEW screen
  3. CLICK at least one, possibly TWO, links in each newsletter
  4. If using Gmail or similar software, check the All Mail and Promotions area. Create a FILTER named _ATB and magic will happen!

The first three things will communicate to your incoming invisible email postmaster that I’m a friend, not SPAM, that you like what is in the email because you OPEN IT, and you REALLY like the email newsletter because you CLICK LINKS in it.

It’s that simple. Just do those three things each week and you’ll be set.

Epoxy Garage Coatings

Are you thinking of investing in one of those attractive epoxy coatings for your garage floor? Like this:

epoxy garage coating

CLICK or TAP HERE to see what can go wrong and what the alternatives are.

Fires and Fried Chicken

I love fried chicken. I know I could eat it twice a week.

How would you like the aroma of fried chicken drifting up your schnozzle as you enjoy a nice fire in your home?

CLICK or TAP HERE - I guarantee you’ll LAUGH! This is a GREAT Christmas gift idea.

My Daughter’s New Stairs

A little over two years ago, my daughter and son-in-law started to build their dream home on Mt. Desert Island, Maine. They finally moved in at the end of July.

There’s a tale to tell about the saga, but not today. I want you to watch a video and take a look at their amazing modern and sleek staircase. I suggested they use LJ Smith stair parts and fortunately they listened to Dad!

For you to fully appreciate what the stairs look like now, I want you to look at a BEFORE photo of the stairs leading to the second floor:
Daughter's New Stairs Before

CLICK or TAP HERE to see the DRAMATIC after photo and to watch a video I recorded about how you can have eye-popping stairs, railings, newel posts, balusters, and volutes in your home! All from LJ Smith!

Amazing Magic Fire Starter

Speaking of fires, I want to share a SAFE new product that can create a roaring fire like the one below in about three minutes or less.

You MUST READ the funny story about how I tricked my youngest daughter and two of her friends using it a week ago. My new moniker with them is Wizard Dad!

CLICK or TAP HERE to read the short story about my magic skills. You'll then understand why I'm a life member of the NH Guild of Wizardry and Enchantment.

Check out this fire I started using this NEW PRODUCT. Minutes before there was NO FLAME. I used NO MATCHES!

campfire by lake with full moon

Avarice

Do you know who Tommy Thompson is?

You can discover a very important life lesson if you read a book about him and what he did thirty-five years ago.

CLICK or TAP HERE and I absolutely guarantee you’ll be blown away.

That’s enough for a Sunday.

I hope you tell that person you love how you feel about them. Don’t wait until it’s too late.

Tim Carter
Founder - www.AsktheBuilder.com
BEST Organic Cleaner - www.StainSolver.com
I Shuffled with Zombies - www.W3ATB.com

Do It Right, Not Over!

P.S. Are you going to remodel your kitchen? What are the TOP TEN MISTAKES you’ll make? CLICK or TAP HERE to avoid some of those mistakes.

Plumbing Plans Consulting

riser diagram

Plumbing Plans Consulting | You'll need a master plumber to draw a riser diagram like this. CLICK or TAP HERE and I'll do it for you. You can't begin to draw plumbing plan isometric drawings unless you know your PVC pipe sizes and exactly where the IPC requires they be used. (C) Copyright 2021 Tim Carter

Plumbing Plans Consulting - Ask a Master Plumber Like Me

Do you need some help with your isometric plumbing plans? It's best to ask a seasoned master plumber.

I've been a master plumber since age 29 and can answer just about any question. If I don't know the answer, I know where to find it.

Can You Explain Riser Diagrams?

Yes, I can not only explain riser diagrams, but I can also draw them for you. I draw mine in color so they're easier to understand.

Are Vent Pipes Necessary?

Yes, vent pipes are necessary in all plumbing systems. They provide the pathway for air to enter the system. Air is needed each time you put water down a drain.

Travel Chess Set

travel chess set

Travel Chess Set | This is a rare wooden-peg travel chess set with inlaid wood squares. It measures just 6 by 6 inches unfolded! BTW, be sure to rotate the board 90 degrees from where you see mine. The black rook in the lower right should be sitting on a light-colored square, not dark. Buy one of these travel chess sets with the pegs if you can find one. Why? Some might consider it a gewgaw. What is a gewgaw? CLICK or TAP HERE to start your search.

Travel Chess Set - Lots of Fun in a Small Package

Here's my 50-year-old travel chess set. Most of the new ones you can buy today are magnetic and don't use the wood pegs and holes. I really treasure mine. It's made from real inlaid wood, not plastic!

Mine is only 6 x 6 inches when you have it all set up. It folds up to 3 x 6 x 1 inch when you store it.

CLICK or TAP HERE to order a set very similar to mine.

travel chess set

This is the set folded up. CLICK or TAP HERE to order one now.

travel chess set

Here's the embossed brass clasp. You don't always get this type of detail in newer sets. CLICK or TAP HERE to order one now.

travel chess set

I've included a note with my set so my kids don't pitch this when they send me back to Heaven. CLICK or TAP HERE to have a set delivered to your home.

Check out my KFC firelog review if you want the delicious smell of fried chicken wafting around you as you play chess.

KFC Firelog

kfc firelog

KFC Firelog - This makes a perfect fun Christmas gift. CLICK or TAP HERE to order now.

KFC Firelogs - Flavor From Your Fireplace

You can smell delicious Kentucky Fried Chicken as you have a fire!

WOOT. CLICK or TAP HERE to order a few now.

This makes a perfect prank or fun Christmas gift!

You'll also need a Pull Start Fire thingamabob for your other fires if you start to gain weight using the KFC firelog. Unidentifed sources report a 15% weight gain over the winter when using the KFC firelog at least three times a week.

Pull Start Fire Review

pull start fire results

Pull Start Fire | This is the kind of roaring fire you have in just minutes with Pull Start Fire. CLICK or TAP HERE to have six of them in your hands in two days. I started this fire using Pull Start Fire and this is what it looked like in less than 3 minutes after pulling the red string.

Pull Start Fire - It Really Works! Put on a Magic Show

I tested the Pull Start Fire product over the past month. It's pretty amazing and I can tell you I have three of them in my survival kit.

IMPORTANT NOTE: This is truly a life-saving invention or tool. You SHOULD absolutely have three of these if you feel the need to stay warm in some sort of disaster situation or accident while out traveling. CLICK or TAP HERE now to order.

How Did You Use Pull Start Fire in a Magic Show?

A week ago, my youngest daughter had two friends over to watch movies outdoors. They used a magic little movie projector that they could download an entire movie into. They wanted to do this down by the lake at my house. They used a white sheet as the projection screen.

small movie projector

This is a tiny movie projector about the size of a can of soda! It has it's own battery! CLICK or TAP HERE to order one.

I knew it would be dark by the time they arrived and the temperature was forecast to drop into the 40s by the time they were done with the movie, so my daughter asked me to help with a fire.

She was at work so I stacked the firewood just like I was taught as a Boy Scout. I put the Pull Start Fire product at the base of the stacked firewood, extended the red string to the edge of the granite fire ring, and covered all of it with dry leaves and pine needles to hide it.

When all the girls came over and we wandered down to the patio by the lake, it was pitch dark. A perfect way to create the illusion.

I had prepared a small prayer thanking the Great Spirit for the gathering, the good food and drink, the magic lightbox, and His ability to keep all warm. It ended with, "... we thank you for your gift of warmth and ask now for your help to ignite the flames!"

I yanked the string in the darkness, the Pull Start Fire went POP, and moments later the firewood was starting to blaze away.

"How did you DO THAT?" The girls asked. Because it was pitch black, they didn't see me pull the string, and of course, had no idea there was any sort of magic firestarter. They probably thought I'd just strike a kitchen match to light the fire.

Like any magician, I just walked back up the stairs to the house saying, "Have a great movie!"

Of course, you don't tell how you do magic, silly!

What is So Fantastic?

You don't need matches to start a fire! Just about every other fire-starting method relies on matches, or a lighter, or a fire piston, or a magnifying glass, or who-knows-what. With Pull Start Fire, you simply pull a string and you've got a roaring fire in three minutes - assuming you know how to stack firewood using increasingly larger sizes in a cross-hatched pattern like cribbing.

How Big is Pull Start Fire?

The magic box is about the size of a traditional ice-cream sandwich. It's 1 inch high, 4.5 inches long, and 2 inches wide.

Will It Ignite Wet Wood?

The manufacturers claim it will. It's KEY to stack the wood like cribbing and to have smaller pieces of wood situated over the top of the Pull Start Fire box. Use common sense.

pull start fire

This is what the box looks like. Don't eat it thinking it's an ice-cream sandwich. CLICK or TAP HERE to have three delivered to your home.

pull start fire

This is how simple it is to start a fire. Even with wet or damp wood! CLICK or TAP HERE to order now.

pull start fire

This is the green string you loop around one of the bottom logs. Be SURE you have lots of air space around the wood. Stack small 3/4-inch pieces over the box so that wood catches on fire fast. CLICK or TAP HERE to order.

pull start fire

This red string is about 24 inches long. You give it a solid YANK to get Pull Start Fire to ignite. CLICK or TAP HERE to order three of them immediately.

Check out my American Standard Saybrook Kitchen Faucet review. You may need to get water from it in case your fire gets out of control!

Tommy Thompson Ship of Gold in the Deep Blue Sea

Ship of Gold in the Deep Blue Sea book cover

Tommy Thompson - Ship of Gold in the Deep Blue Sea

Tommy Thompson screwed his investors out of the $12.7 million dollars they put up in the mid-1980s to fund his expedition to locate the S.S. Central America. Once he found the ship and salvaged the gold, his troubles started to mount from a slew of lawsuits from insurance companies claiming rights to some or all of the gold. It turns out international marine salvage law is as complicated as Chinese arithmetic.

The gold then consumed his life, his marriage, and then convinced him to go on the lamb until being captured by US Marshals.

What a price to pay for greed! There was PLENTY of money for everyone! He was such an IDIOT.

CLICK or TAP HERE to read Gary's fascinating book of how Tommy found the S.S. Central America and how he drank from the poison chalice of fame and money. How much money?

The S.S. Central America had 21 tons of gold in its hull.  At today's price (October 29, 2020 of $1,870 per ounce) that's $1,256,640,000. That's $1.2 BILLION dollars.

Can you imagine being so greedy that you couldn't split the hundreds of millions of dollars with the investors that believed in you?

CLICK or TAP HERE to read about his capture.

 

LJ Smith Stair Systems

tim carter stairs

These are all LJ Smith stair parts in my Queen Anne Victorian home.

LJ Smith Stair Systems - Many Styles and Species

I've used LJ Smith stair systems for decades. The one in the last home I built for my family was stunning. Here's a photo of the staircase in my last house going from the entrance hall to the second floor. Tim mentioned using LJ Smith Stair Systems way back in his January 25, 2018 AsktheBuilder Newsletter.

Watch this video to see a more sleek system incorporating white oak with powder-coated balusters and newel posts. Look below at the stark before and after photos of my daughter's LJ Smith staircase!

Listen to the second caller in this podcast to discover more about LJ Smith:

rough staircase stairs new house

These are the stairs going up to the second floor in my daughter's new home.

wood staircase with iron balusters new house

I know, it's hard to believe this is the same house! But that's the magic of using LJ Smith stair parts!

Related Column: Design the Perfect Set of Steps

Richard P. Anderson Cincinnati OH

Richard Anderson Cincinnati OH

There's my buddy Richard! He's holding the microphone and was kind enough to help me on one of my radio shows. I suspect this photo was shot in 1995-1996. We were doing a live remote broadcast from Lisa Motz's home on Clough Pike. I had a two-hour call-in show on 1450-WMOH. It was all about how Lisa was eating an elephant by undertaking a massive DIY project on her own. She was in way over her head.

Richard P. Anderson - April 16, 1946 | October 25, 2020

Richard P. Anderson was my best friend in Cincinnati, OH. I can't begin to share with you the depth of his wisdom, generosity, integrity, diligence, determination, and discipline. He was an inspiration to me in so many ways and as often happens, I failed to tell him how much I admired him and how much he meant to me before he was sent back to Heaven on October 25, 2020, on very short notice.

Have you made that mistake before with someone you've loved? Don't make it twice.

I feel it's important for you to know as much as possible about Richard because sterile obituaries often just give you the view of a person's life from 30,000 feet. I want you to come to know the Richard I was with down in the trenches of life on a weekly basis.

Mark Ossege's House

Richard and I came to know one another through a mentor of mine, Bill Lange. Bill was a retired engineer, mechanical I believe, who was a friend of my father and mother-in-law. He had a lovely wife named Helen and they lived in Maderia, OH. One day I was with Bill at an old Cincinnati company called Stampco. This was a company that sold heating and cooling ductwork supplies and they made custom ductwork. HVAC contractors would purchase their extended plenums from Stampco. An extended plenum is the large sheet-metal box that fits on top of a furnace.

I was about to build my first custom home for Mark Ossege, the owner of Dillionvalle IGA. Bill and I were at Stampco getting some part and he asked one of the counter employees who was the best small HVAC guy that came in to purchase supplies. "Oh, that's easy. Richard Anderson of Sergeant's HVAC." The Stampco employee wrote down Richard's number and that was the beginning of a most wonderful 35-year friendship.

Richard came to the new house job site as we were framing the house to get a set of blueprints. He was dressed in crisp and clean professional dark-blue uniform pants and a matching short-sleeved shirt with a "Rich" name patch over the left pocket. He also was wearing a Sergeant's HVAC baseball cap. I would come to find out that this is exactly how Richard was to dress whenever I saw him in a work environment. He was the consummate professional.

Do It Right, Not Over

Richard installed a complex heating and air-conditioning system in Mark's house. It was the first custom house I built. I knew just enough about building at the time to be very dangerous. Richard was six years older than I was and it wasn't his first rodeo. It became crystal clear within days that he only did things one way - the right way.

One of the things I noticed right away was how clean all of his equipment was and how at the end of each day he cleaned up any and all debris he had created. Most other sub-contractors and I hate to say this, were slobs. Not Richard. He swept up every day and by the time his white van was driving away, you'd never even know he'd been there.

My customers came to love Richard as much as I did. It was as obvious as the nose on your face that he not only cared about his work, but he also cared about the customer's home. That construction characteristic in workers is rapidly transitioning from history to legend, to myth in today's job-site environment.

One of Richard's favorite tools was a hammer he used to assemble his sheet metal. It had a brown handle and a very square head much like my geologist's hammer from college. I remember how he guarded this hammer as a mama bear would protect her cubs.

richard anderson hammer

This is Richard's favorite tool - his hammer. This photo appeared in a special story I wrote for the Cincinnati Enquirer in June of 1995.

I hope one of Richard's sons or his daughter keep this in the family as a cherished heirloom. I can only ponder how many times Richard grasped this hammer in all sorts of weather on countless jobs to tap together ductwork for a system that kept homeowners comfortable in their homes.

I mentioned Richard and this hammer in a special story I wrote back in the mid-1990s about tools. I need to find that story and republish it here on the website. (Author's Note: Go here to read that special Men and Their Tools story.)

Wisdom

Richard was extremely intelligent. He was wiser than many who have a Ph.D. after their name, yet I'm quite certain Richard didn't graduate from high school. He did receive his GED while he was in the US Marines.

Some of his best mental skills were those about people. Richard is the one who tamed that wild mustang inside of my head when I was in my mid-30s. This brusque attitude caused me to want to be right all the time in any conversation I had with anyone.

"Tim, you need to know that the strongest person is the one that offers the olive branch." That statement seemed so wrong to me. My brain screamed that it should be the weakest person that caves first or offers up an apology. Once again, I was wrong and Richard was right.

Richard always was thinking of things that didn't exist yet, or if they did, we didn't know about them. For example, twenty or more years ago, he thought cars should be equipped with a remote ignition kill switch so in police chases, the police could just turn off the engine to the speeding car. Brilliant!

Well, many cars today have such technology. You can start your car without being inside it.

Vietnam

Richard enlisted in the Marines back in the 1960s if my memory is correct. He became a sergeant and platoon leader. I know after his first tour of duty, he went back a second time. I often attempted to talk with him about his battle experiences trying to get a feel for what my Dad went through in the great WW II.

But Richard never seemed comfortable talking about certain things of his time as a Marine. I'm positive it brought back lots of bad memories. This is why it was never talked about in my own home growing up. My Dad was haunted by demons from his war experience as a medic and German POW for seven months.

One day while at a job site I asked Richard, "How close were you to the enemy in a typical skirmish?" Richard had a way of rapidly blinking his eyes when he was nervous or in deep thought. He didn't answer right away, got up, and picked up a rock that was about the size of a tennis ball.

"Throw this for me as far as you can." He said while handing it to me. I did and it went 60 feet, maybe a little farther.

"That's how close we were. You just threw a hand grenade." It was a sobering moment because I thought about how accurate rifles were at close range like that. In my head, I thought battles were fought at much greater distances.

Richard received great honors while in Vietnam. If I remember his story, he and his platoon were put in charge of a village. As best as I can understand it, Richard was the governor and he had to set up all sorts of services to help make life better for the Vietnamese people in the village. I'm certain he told me about a young teenage girl in the village that knew English. She acted as his translator. I so wish I would have tape-recorded all of this twenty-five years ago when he shared the story.

When the general flew in to give Richard his medals and awards for this great work, I remember him saying the general was very short and Richard was not to look down at him giving him eye contact. The general was very sensitive about his height. Someone took a photo of Richard getting the award or medal and I got to see this priceless moment in time captured with silver bromide crystals on photographic paper.

Being in the Marines no doubt helped polish Richard's amazing diligence, determination, and discipline. My guess is those qualities are beat into recruits in boot camp. I doubt they had to work hard with Richard as they were already instilled in him.

One of his funny war stories was about the transport ships that took him to Vietnam. It was hot and miserable on the ships and often the ships would stop in the ocean and Richard and hundreds of others who could swim jumped in the water to recreate and cool off.

The trouble was US Navy sailors were issued rifles and posted as lookouts on the deck to watch for sharks. At some point after swimming a few times, Richard watched the sailors practice their shooting skills. They would throw an empty 55-gallon drum overboard and use it as a target. Suffice it to say that many of the sailors couldn't hit the drum. If they couldn't hit a large floating drum, how in the world would they shoot a moving shark? I don't believe Richard swam after seeing this poor exhibition of marksmanship!

Speaking of marksmanship, Richard was an excellent shot and got all sorts of high marks for his skills and accuracy. I believe he had the highest rating for both rifle and the .45 1911 pistol.

Ask the Builder

I'll never forget Richard and his wife Linda being my biggest cheerleaders when I decided to stop building and invest all I had in my fledgling Ask the Builder media career. He always offered encouragement and supported me.

Just months after launching my Ask the Builder newspaper column, I started a talk-radio show on 1450 WMOH in Hamilton, OH. I was horrible on my first show. I'm almost certain Linda called in with a fake question to try to get me to calm down. After the show when I got home, Richard called me to tell me how great I was. He was so very good at being mendacious!

Richard and Linda gave Ask the Builder its first dollar. I'm sure you've seen this before in bars and other businesses where they frame the first dollar they get from their first customer. I still have the check for $1.25 they sent for the first Builder Bulletin I published. I framed the check and it was in my basement office. That framed check is now packed away in a box in my garage, but you can bet I'm going to dig it out and proudly display it in my current office.

The Swimming Pool

Richard and Linda had a giant above-ground swimming pool in their backyard. It was an oasis of fun and memories. I had an open invitation to come over and swim on hot humid Cincinnati days. My two youngest kids have great memories of these adventures. I have wonderful vivid memories etched into my gray cells.

I had just made the transition from builder to columnist and money was tighter than a banjo string at the Carter house. I couldn't even think of taking my kids to Kings Island - it was far too much money. Swimming at Richard's house cost $5 in gasoline to get there and back. My youngest daughter reminded me that we got into a rut listening to Van Halen songs going to and from Mr. Anserhan's house. That's how my young son pronounced his name.

One of the things we'd do each time is create the infamous Richard's Whirlpool.

"Let's make a whirlpool!" Richard would exclaim. Everyone would get next to the railing on the outer edge and we'd all try to run in the water around the pool in the same direction as fast as possible. This would get thousands of gallons of water swirling in the pool. It was exhausting trying to battle your way through the water, but fun.

Many a game of Marco Polo was played in this pool. My kids learned to swim in Richard's pool.

Richard P. Anderson

Here's Richard with his snorkel mask helping teach my youngest daughter how to swim with water wings and a floatie. RIP Richard!

Linda would always have hot dogs, hamburgers, macaroni and cheese, and other treats for us. She loved my kids as if they were her own. Richard did too.

Projects on Howard Road

Richard and I would never hesitate to help one another. If I needed service on my furnace or AC unit, Richard would fix it as a magic elf might do it. He'd always refuse to take money and for bigger jobs that took the better part of a day, I'd have to force it on him.

Many years ago his house needed a new shingle roof and I put it on with my two helpers in a couple of days. I remember helping Richard extend the drain pipe from his septic tank down into the creek that ran behind his house. The crazy plumber that installed the septic tank put it too deep into the ground. Idiot!

One day Richard came to a job site of mine and said, "I want to build a cool shed in the back yard. Do you have any tips?" I remember helping with much of the shed and framing the roof is a vivid memory because I was horribly sick with the flu when I did it. A task that should have taken two hours took all day I was so weak.

Richard set up a model train setup in the shed and it was his fun adult clubhouse if I remember correctly.

Music

Richard loved music. He liked all types. One of his favorite songs was Joe Walsh's Life's Been Good To Me. We would both enjoy it on many a day when we'd drive from my house to lunch at Skyline Chili in Kenwood.

Politics

Back in the mid-1990s, Richard was consumed by politics. He'd watch C-SPAN and would tell me all about exactly what this or that politician had said in a speech on the floor of Congress. I was so crazy busy trying to scratch out a living with my new Ask the Builder venture I had no time ever to watch any television. What's more, I had my head in the sand about politics in general at that point in my life.

Richard loved to go on and on about how this or that politician was lying or telling half-truths. Little did I realize that this was foreshadowing what I'd learn from Louis Katz, a prominent Amberley Village attorney that I served with on Amberley Village Council.

One day Lou said, "Tim, you know why when a person is sworn in that they have to say they'll tell the whole truth and nothing but the truth?"

"No, why?" I responded. I had never really thought about that oath.

"It's simple. A half-truth is a whole lie. Judges and juries need to hear the whole truth to make correct decisions in legal matters."

Richard thought the act of telling a half-truth was hateful.

Drifting Away

Unfortunately, the farther I walked down the pathway of my Ask the Builder media career, I noticed that Richard and I started to slowly drift apart. When I was still building, we would see each other frequently on the job site. Richard worked so very hard at staying connected after I started working from home and anytime he was working near my house, we'd always try to go out for lunch.

He'd stop by the house and come down to my basement office to get me. Off we'd go in his trademark white van filled with all the tools and parts he needed to service furnaces and AC units. He preferred Gold Star Chili over Skyline - my favorite - and he'd never complain if I nudged us to go to Skyline. We also had many a lunch at Pleasant Ridge Chili too.

When I moved to New Hampshire in the summer of 2008, I know it made Richard very sad. I hated leaving him, but it had been a life-long dream of mine to live in New Hampshire. I always encouraged him and Linda to drive up to visit, but he never was able to pull it off.

The phone calls became more and more infrequent over time, but I knew that we were still the best of friends. Looking back now, I can tell you I made a grave mistake of not calling Richard at least once a month to share what was new and how things were in New Hampshire. He subscribed to my weekly newsletter, but I should have given him a personal full report instead of him getting the version everyone else got.

I'm not ashamed to say I loved Richard, but my only regret is I never said those words to him.

When Linda called us here the day after Richard passed, she shared a funny anecdote. Richard always said he wanted to go first and he told Linda, "Be sure you put $300 in my pocket before they take me away."

"Why?" Linda asked the first time he said this.

"It's simple. I'll need it to pay your way into Heaven."

I hope he took enough money for me too! RIP Richard, I'm going to really miss you.

Author's Note:

Richard's wife Linda and his youngest son Scott discovered this page as I knew they would. It was important to me that it happen that way. Here's what Linda wrote:

"Tim, Thank you so much for this awesome honor to Richard. It brought happy tears to my eyes. It was right on target about him. You were his best friend also, no matter how far away you two were. I miss him terribly, and I will look forward to the day we are together again in God's home. This is the best tribute to him, and I love you for doing it. Take care, and I have an 8x10 picture of him at age 69, in my kitchen, he is flexing his muscles and was working out a lot then. I leave it there. He says to me "BE STRONG". I am trying, not easy, but in time?"

Here's what Scott sent:

"Thanks, Tim! You made my mom's day! He always talked so highly of you. He sure was good with that hammer. I will look for it soon. You take care of yourself and your family! Love, Scott"

I hope Scott does locate the hammer. It should be framed and passed down through the family for generations to come.

I met Scott, Linda, and Scott's girlfriend for breakfast in October, 2021 on a visit to Cincinnati. Scott shared with me a story he wrote about a fun experience he had with Richard one afternoon. I suggest you read it.

I shared this narrative with the 31,000 subscribers who received my November 1, 2020 FREE newsletter.

Tim Bucher

On October 25, 2021 I received the following email from Tim Bucher:

Just wanted to let you know they found the hammer! My name is Tim and I moved next door to Linda in July and just found your page today on the 1st year of Richard’s passing.  I don’t think it’s on accident. I have never met Richard in person but I can’t help but feel his presence still here on Howard.  Here’s the newspaper articles you mentioned. Richard installed the HVAC unit in our house in 1993 and it’s still working. Like you said “do it right”.  Take care.

I responded and Tim then sent this:

I had a good laugh and a few tears reading your tribute to Richard.  I myself have always been a skyline man too, but maybe tonight I'll get gold star and take it to Linda. Just reading what you wrote, Richard knew you loved him, I'm going to go crank up some Joe Walsh.  I want to try to see if we can locate other recipients of the walking sticks he gave out of the years, Linda said it was over 100!, maybe we could get a picture of everyone or have a walk in Richard's name. I found one in my garage when we moved in, I like to think Richard left it for me.  Meeting his family has given me a glimpse of who he was, and I feel obligated to do something to honor him.

We continued the email conversation over a few hours and he sent the following photo looking out of his window over to Richard's deck and the shed I helped Richard build. Tim is holding one of the walking sticks Richard made. I have one of the first ones he hand-crafted.

 

I asked Tim if I could re-publish the photo and he sent this:

richard anderson deck and shed

You're looking at Richard's deck with his US Marines flag and Old Glory waving on a gorgeous April 24, 2022 day. That's the top of Tim Bucher's walking stick made by Richard. Photo courtesy of Tim Bucher

You sure can, however you want to reference me or the picture is fine. I read about the shed, I wanted it in the photo too.  That shed is going to last longer than me!

Richard's Walking Sticks

Before I moved to New Hampshire, Richard gifted me a walking stick. Prior to this he had given me quite a few unique gifts. When this was happening, I had just started Ask the Builder and money was tighter than a banjo string. I was unable to reciprocate giving him gifts.

Look at the detail Richard put into this stick. My guess is as he made more of them, he became more creative. In the last photo, you can't see the violet color in the one circle very well, but it's vivid in person.

richard anderson walking stick

richard anderson walking stick close

richard anderson walking stick close

richard anderson walking stick painted

richard p anderson walking stick for tim bucher

This is a walking stick made by Richard. Tim Bucher found it in his home when he moved next door to Richard's house.

Richard's Headstone

Richard's wife, Linda, stays in touch with me. We're dear friends and she was in many ways a fantastic aunt to my kids growing up. She loved all three of them and they talk about her and Richard frequently. The fun summer days swimming in the pool and eating Linda's delicious hamburgers, mac & cheese, beans, and ice cream are tattooed in their brains.

Linda was kind enough to send me this photo of the rear of their joint headstone. I'll never forget when Richard talked to me about buying his Cloud 9 flying machine. He was so excited. It was a two-seater and one day he took me for a ride. It was a marvelous experience. Richard immersed himself in flying and he did it with the same care, thought, and attention to detail he put into everything in his life.

I was unaware the following video existed. It was recorded by one of the top photographers of the Cincinnati Enquirer - Michael Keating. It brought me such pleasure watching it because I could HEAR Richard's voice again! Listen to the amount of pleasure flying gave Richard:

It's only fitting that this image of him be part of his legacy and I can only imagine what visitors to the cemetery might ponder, 'Who was this man who flew that contraption?" I'll tell you - He was my best friend.

richard anderson headstone

 

Move Pipes in Wall

Move Pipes in Wall

Move Pipes in Wall | Beware advice from some handymen and plumbers saying you can’t relocate these vent pipes. They’re wrong. Copyright 2020 Tim Carter

QUESTION: Tim, I need you to weigh in on a remodeling conundrum. Two plumbers and one handyman say that two plumbing vent pipes can’t be relocated to an exterior wall. I took the drywall off the back of a linen closet to open up the space for my soaking tub. I want to have extra space for candles and wine bottles. I live where it can get really cold and they say this can be a problem. Do you know anything about plumbing? Can the vent pipes be moved, yes or no? Can I just cap them off below the floor? Also, what about moving wires and ductwork? Can that be accomplished? What’s involved when moving all these utilities? Suzanne B., Minneapolis, MN

Have you experienced that “Uh oh” moment at some point in your remodeling escapades over the years? You know, when you gleefully start to tear down a wall and find all sorts of unexpected things going up through and between the wall studs?

How easy is it to relocate pipes?

The fast answer for Suzanne is the vent pipes can be moved. I can say this with a considerable amount of authority as I’ve been a master plumber since age 29. The follow-up question might have been, “Tim, how easy will it be to relocate the pipes?

That question can only be answered by a visit to the job site to see what framing is in the way and what additional demolition needs to be done to create a pathway that will allow the vent pipes to drain any condensate back into the drainage part of the plumbing system. Local codes may require the vent pipes be put in certain walls. That’s up to your local inspector.

CLICK or TAP HERE to get FREE BIDS from local plumbers that can move vent pipes or water lines.

Can you cap off a vent pipe?

Never cap off vent pipes. These pipes are vital as they deliver air into the plumbing system. Most people think that the plumbing vent pipe up on the roof is like a factory chimney that exhausts smoke. Vent pipes work in reverse. They deliver air down into the system each time you flush a toilet, drain a sink, or run water into a fixture. The moving water not only pushes air ahead of it as it travels to a septic tank or sewer, but it can also create a vacuum as a slug of water passes a drainage branch within the system.

vent pipe in bathroom

You can see the two vent pipes combine to become one. You can move these to the exterior wall in almost all cases.

Why do vent pipes need to be sloped?

Vent pipes need to be installed just like regular plumbing drain pipes. They need to have a slope so that any condensation that does form in the pipes can drain by gravity into the plumbing system on its way to the septic tank or sewer. This same condensation can be a pesky problem in cold climates as hoarfrost can choke off a vent pipe. This is why in very cold climates the main vent stack is often full-sized and a 4-inch-diameter pipe. The larger pipe size means that much more frost must form to choke off the air supply.

Can vent pipes be installed on a cold exterior wall?

Vent pipes on exterior walls in cold climates should be located in such a way as to be as far from the cold exterior wall surface as is reasonably possible. You want as much insulation space between the pipe and the outer wall to hopefully keep the pipe temperature just above freezing.

Can electrical wiring  be relocated?

Electrical wiring can also be relocated in a remodeling job. There can be significant challenges and the paramount thing you must realize is you or a worker should never ever bury a junction box. If you have to create a splice to add additional wiring, the junction box must be visible. You can often achieve this in a closet.

I always wrote a note and included a small drawing in the junction box of what had to be done to move the cable. Trust me when I say a future electrician will cherish reading this note. It might help him diagnose some future problem within the circuit as he’d have no idea that remodeling work might have happened fifty years prior.

move pipes in wall

Are HVAC ducts hard to relocate?

Heating and cooling ductwork is, by far, the hardest thing to relocate. The size of the pipes and ducts in the first challenge. The second more sinister issue is poor performance because extra fittings and ductwork need to be added to make the change.

The addition of a 90-degree bend to a typical heating or cooling duct line is like adding ten extra feet of pipe. The air moving through a heating or cooling duct is very sensitive to extra friction caused by additional fittings or pipe. More friction equals less conditioned air being delivered to the room where it’s needed.

Be sure to have a frank discussion with your HVAC professional about this if the room being served by the ductwork is currently on the edge of being comfortable in extreme hot or cold weather.

Will photographs during construction help future remodeling?

If you’re building a new home or a large room addition, you can do yourself, remodeling contractors, and future homeowners a huge favor. Try to take as many photos of all the walls, ceilings, and floors in your new home or room addition as possible before utilities are covered with drywall or insulation. Store these photos on a simple storage device like an SD card or micro-SD card. These are so very inexpensive and can hold thousands of photos.

micro sd card

This is a micro SD card as of October 2020. Who knows what we'll be using in 2030! CLICK on THE IMAGE to order one.

Put this memory card in a plastic bag and label it. Tape this bag to the front or inside cover of the circuit-breaker panel. You have no idea how valuable these photos will be to someone in the future and they’ll toast you that day at lunch or dinner!

Column 1377